Influence of silver incorporation on CZTSSe solar cells grown by spray pyrolysis
Source abstract
Abstract
Abstract Chemical spray pyrolysis was employed to prepare kesterite Cu2ZnSnS4 layers with different Ag contents. The Cu2ZnSnS4 layers were processed at 350 °C from solutions of Cu, Ag, Zn and Sn metal salts and thiourea dissolved in water as the most environmentally friendly solvent. The as-prepared layers were subsequently annealed at high temperature in chalcogen atmosphere in order to obtain well crystallized kesterite Cu2ZnSn(S,Se)4 absorber layers. The influence of different Ag contents on the properties of the as-prepared layers, the resulting absorbers as well as the devices performance was investigated. Enhanced crystallinity and grain growth were observed for Ag containing as-prepared layers as well as selenized layers. As a potential consequence, this enhanced grain growth appears to facilitate the formation of MoSe2 layer at the back contact/absorber interface during the selenization process. Further, the incorporation of Ag improved the performance of kesterite devices up to 7.1% for 5% Ag/(Cu+Ag) composition. However, for Ag contents beyond this level we observed impairing of the device efficiencies with higher Ag content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. High-efficiency solar cell with earth-abundant liquid-processed absorber10.1002/adma.200904155 ↗
2. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
3. Improvement of voltage deficit of Ge-incorporated kesterite solar cell with 12.3% conversion efficiency10.7567/APEX.9.102301 ↗
4. A band-gap-graded CZTSSe solar cell with 12.3% efficiency10.1039/C6TA01558A ↗
5. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. High efficiency Cu2ZnSn(S,Se)4 solar cells by applying a double In2S3/Cds emitter10.1002/adma.201402373 ↗
7. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
8. Why are kesterite solar cells not 20% efficient?10.1016/j.tsf.2012.12.089 ↗
9. Is the Cu/Zn disorder the main culprit for the voltage deficit in kesterite solar cells?10.1002/aenm.201502276 ↗
10. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
11. Band tailing and efficiency limitation in kesterite solar cells10.1063/1.4820250 ↗
12. Impact of bulk properties and local secondary phases on the Cu2(Zn,Sn)Se4 solar cells open-circuit voltage10.1016/j.solmat.2014.10.042 ↗
13. Kesterite compound semiconductors for thin film solar cells10.1016/j.cogsc.2017.02.010 ↗
14. L. Risch, L. Vauche, A. Redinger, M. Dimitrievska, Y. Sánchez, E. Saucedo, T. Unold, T. Goislard, C.M. Ruiz, L. Escoubas, J.J. Simon, Overcoming the Voc limitation of CZTSSe solar cells, in: Proceedings of IEEE 43rd Photovoltaic Specialists Conference (PVSC), Portland, OR, 2016, pp. 0188–0192.10.1109/PVSC.2016.7749575 ↗
15. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
16. On the interface between kesterite absorber and Mo back contact and its impact on solution-processed thin-film solar cells10.1016/j.solmat.2016.09.029 ↗
17. Improvement of the structural and electronic properties of CZTSSe solar cells from spray pyrolysis by a CuGe seed layer10.1039/C7RA02129A ↗
18. Enhancing the Cu2ZnSnS4 solar cell efficiency by back contact modification: inserting a thin TiB2 intermediate layer at Cu2ZnSnS4/Mo interface10.1063/1.4863736 ↗
19. Inhibiting the absorber/Mo-back contact decomposition reaction in Cu2ZnSnSe4 solar cells: the role of a ZnO intermediate nanolayer10.1039/c3ta11419h ↗
20. Over 9% efficient kesterite Cu2ZnSnS4 solar cell fabricated by using Zn1−XCdxS buffer layer10.1002/aenm.201600046 ↗
21. Reduced interface recombination in Cu2ZnSnS4 solar cells with atomic layer deposition Zn1−XSnxOy buffer layers10.1063/1.4937998 ↗
22. Voc boosting and grain growth enhancing Ge-doping strategy for Cu2ZnSnSe4 photovoltaic absorbers10.1021/acs.jpcc.6b02315 ↗
23. Large efficiency improvement in Cu2ZnSnSe4 solar cells by introducing a superficial Ge nanolayer10.1002/aenm.201501070 ↗
24. Germanium alloyed kesterite solar cells with low voltage deficits10.1021/acs.chemmater.5b04806 ↗
25. Beyond 11% efficient sulfide kesterite Cu2ZnxCd1−XSnS4 solar cell: effects of cadmium alloying10.1021/acsenergylett.7b00129 ↗
26. Improving the performance of solution-processed Cu2ZnSn(S,Se)4 photovoltaic materials by Cd2+ substitution10.1021/acs.chemmater.6b02111 ↗
27. Lithium-doping inverts the nanoscale electric field at the grain boundaries in Cu2ZnSn(S,Se)4 and increases photovoltaic efficiency10.1039/C5CP04707B ↗
28. Substitution of Li for Cu in Cu2ZnSnS4: toward wide band gap absorbers with low cation disorder for thin film solar cells10.1021/acs.inorgchem.6b02865 ↗
29. Crystallographic and optical properties Of (Cu,Ag)2ZnSnS4 and (Cu,Ag)2ZnSnSe4 solid solutions10.1002/pssc.201400343 ↗
30. Optoelectronic and material properties of nanocrystal-based CZTSe absorbers with Ag-alloying10.1016/j.solmat.2015.10.039 ↗
31. Enhancement of open-circuit voltage of solution-processed Cu2ZnSnS4 solar cells with 7.2% efficiency by incorporation of silver10.1021/acsenergylett.6b00509 ↗
32. Photovoltaic materials and devices based on the alloyed kesterite absorber (AgxCu1−x)2ZnSnSe410.1002/aenm.201502468 ↗
33. Cu2ZnSnS4 thin films deposition by ultrasonic spray pyrolysis10.1016/j.jallcom.2012.07.063 ↗
34. Fabrication and characterization of Cu2ZnSnS4 thin films deposited by spray pyrolysis technique10.1016/j.tsf.2006.12.144 ↗
35. Germanium alloyed kesterite solar cells with low voltage deficits10.1021/acs.chemmater.5b04806 ↗
36. Cu2ZnSn(S,Se)4 kesterite solar cell with 5.1% efficiency using spray pyrolysis of aqueous precursor solution followed by selenization10.1016/j.solmat.2014.01.029 ↗
37. Cu2ZnSnS4 thin film solar cells with 5.8% conversion efficiency obtained by a facile spray pyrolysis technique10.1039/C5RA13000J ↗
38. ZnSe etching of Zn-Rich Cu2ZnSnSe4: an oxidation route for improved solar-cell efficiency10.1002/chem.201302589 ↗
39. Investigation of the solid state reactions by time-resolved X-ray diffraction while crystallizing kesterite Cu2ZnSnSe4 thin films10.1016/j.tsf.2013.01.054 ↗
40. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
41. Calculation of the lattice dynamics and Raman spectra of copper zinc tin chalcogenides and comparison to experiments10.1063/1.4704191 ↗
42. Modification of absorber quality and Mo-back contact by a thin Bi intermediate layer for kesterite Cu2ZnSnS4 solar cells10.1016/j.solmat.2015.09.066 ↗
43. Ge-incorporated Cu2ZnSnSe4 thin-film solar cells with efficiency greater than 10%10.1016/j.solmat.2015.09.039 ↗