Impact of substrate temperature on the structural, optical and electrical properties of thermally evaporated SnS thin films
Source abstract
Abstract
Abstract Tin Sulfide thin films were deposited on soda lime glass substrates at three different substrate temperatures using thermal evaporation technique. The impact of substrate temperature on the deposited films has been studied thoroughly. Surface morphology was modified with the substrate temperature. XRD spectra shows orthorhombic end-centered type SnS having (1 1 0) orientation. The crystallite size increases with the increase in the substrate temperature. At a high substrate temperature (450 °C) small grains form on the surface and crystallinity decreases. The effect of substrate temperature on optical and electrical properties has been studied using UV–Vis–NIR Spectrophotometer and Hall effect respectively. With the increase in the substrate temperature there is a substantial decrease in the transmittance and bandgap value. Refractive index ( n ), dielectric constant ( e 1 ) and extinction co-efficient (k) have also been calculated for different substrate temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Thermally evaporated thin films of SnS for application in solar cell devices10.1016/j.tsf.2009.03.003 ↗
2. Photovoltaic structures using thermally evaporated SnS and CdS thin films10.1016/j.tsf.2013.08.078 ↗
3. P.SinsermsuksakulL.SunS.LeeH.ParkS.KimC.YangR.Gordon, Overcoming Efficiency Limitations of SnS-Based Solar Cells, Adv. Energy Mater., 2014, 4:1400496. 〈http://dx.doi.org/10.1002/aenm.201400496〉.10.1002/aenm.201400496 ↗
4. Theoretical considerations governing the choice of the optimum semiconductor for photovoltaic solar energy conversion10.1063/1.1722483 ↗
5. Structural, optical, and electrical properties of tin sulfide thin films grown by spray pyrolysis10.1016/j.tsf.2008.11.026 ↗
6. SnS thin-films by RF sputtering at room temperature10.1016/j.tsf.2010.12.186 ↗
7. Photovoltaic structures using chemically deposited tin sulfide thin films10.1016/j.tsf.2008.11.043 ↗
8. A.BasakS.S.MishraU.P.SinghA.Mondal, Analysis of chemically deposited SnS thin film for solar cell application, in: Proceedings of the Third International Conference on Computer, Communication, Control and Information Technology (C3IT), 2015, 〈10.1109/C3IT.2015.7060192〉.10.1109/C3IT.2015.7060192 ↗
9. Fabrication of SnS2/SnS heterojunction thin film diodes by plasma enhanced chemical vapour deposition
10. Annealing influence over structural and optical properties of sprayed SnS thin films10.1016/j.optmat.2013.04.034 ↗
11. Thermally evaporated aluminum thin films10.1016/S0169-4332(01)00565-7 ↗
12. Influence of annealing on physical properties of evaporated SnS films10.1088/0268-1242/21/8/025 ↗
13. Structural and optoelectronic properties of vacuum evaporated SnS thin films annealed in argon ambient10.1016/j.apsusc.2010.11.103 ↗
14. Intergranular and interphase microstresses10.1016/S1359-0286(00)00019-X ↗
15. Growth and characterization of RF-sputtered ZnS thin film deposited at various substrate temperatures for photovoltaic application10.1016/j.apsusc.2014.08.155 ↗
16. Determination of surface roughness and optical constants of inhomogeneous amorphous silicon films10.1088/0022-3735/17/10/023 ↗
17. Influence of annealing on characteristics of tin disulfide thin films by vacuum thermal evaporation10.1016/j.tsf.2012.03.050 ↗
18. Effect of residual stress on the optical properties of CdI2 films10.1103/PhysRevB.66.075422 ↗
19. Optical properties of thermally evaporated SnS thin films10.1016/S0925-3467(02)00030-7 ↗
20. Influence of postdeposition annealing on the structural and optical properties of sputtered zinc oxide film10.1063/1.362842 ↗
21. Thickness dependent physical properties of close space evaporated In2S3 films10.1016/j.solidstatesciences.2009.04.019 ↗
22. Tin sulfide thin films and Mo/p-SnS/n-CdS/ZnO heterojunctions for photovoltaic applications10.1016/j.tsf.2012.04.030 ↗
23. Characterization of electrical properties and photosensitivity of SnS thin films prepared by the electrochemical deposition method10.1016/j.solmat.2004.04.014 ↗
24. Physical properties of spray pyrolyzed Ag-doped SnS thin films for opto-electronic application10.1016/j.matlet.2014.05.186 ↗
25. Impact of chemical treatment on the surface, structure, optical and electrical properties of SnS thin films10.1016/j.apsusc.2012.12.085 ↗