journal article·2016-01

On the influence of temperature gradient of annealing process on the nano-structure and sensing properties of WO 3 thin films to NO 2 gas and relative humidity

K. Khojier, H. Savaloni, N. Habashi, M.H. Sadi

Publisher page

Abstract

Abstract This research presents a detailed study of the influence of temperature gradient of the annealing process on nanostructure, porosity and the sensitivity of sputtered WO 3 thin films to NO 2 gas and relative humidity that can be used for the development of metal oxide gas sensors. WO 3 thin films were deposited by DC reactive sputtering method and then post-annealed in the air at 500 °C with different temperature gradients (gradual, step by step and rapid annealing). Morphological and structural investigations were carried out on all samples by atomic force microscopy and X-ray diffraction method. Porosity and effective surface area were measured by physical adsorption isotherm. Electrical response of all prepared films was tested to 10 ppm NO 2 gas at the operating temperature range of 50–250 °C and humidity at room temperature. Results showed that gradually annealed sample had the best sensitivity to NO 2 gas and the relative humidity due to the most effective surface area.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Highly sensitive NO2 gas sensor fabricated with RF induction plasma deposition method10.1016/j.snb.2003.12.003 ↗
2. Cross sensitivity and stability of NO2 sensors from WO3 thin film10.1016/S0925-4005(97)80039-1 ↗
3. Effect of substrate on NO2 -sensing properties of WO3 thin film gas sensors10.1016/S0040-6090(00)01261-X ↗
4. Sensing characteristics of dc reactive sputtered WO3 thin films as an NO gas sensor10.1016/S0925-4005(99)00360-3 ↗
5. Influence of effective surface area on gas sensing properties of WO3 sputtered thin films10.1016/j.tsf.2008.10.021 ↗
6. Physical and structural characterization of tungsten oxide thin films for NO gas detection10.1016/S0040-6090(97)01205-4 ↗
7. A semiconducting metal oxide sensor array for the detection of NOx and NH310.1016/S0925-4005(01)00680-3 ↗
8. Nitrogen oxides-sensing characteristics of WO3-based nanocrystalline thick film gas sensor10.1016/S0925-4005(99)00244-0 ↗
9. Hydrothermally synthesized tungsten trioxide nanorods as NO2 gas sensors10.1016/j.ceramint.2014.11.061 ↗
10. Sensitivity properties of a novel NO2 gas sensor based on mesoporous WO3 thin film10.1016/S0925-4005(03)00528-8 ↗
11. Vacuum deposited WO3 thin films based sub-ppm H2S sensor10.1016/j.matchemphys.2012.03.080 ↗
12. Microstructure and enhanced H2S sensing properties of Pt-loaded WO3 thin films10.1016/j.snb.2013.11.106 ↗
13. Highly sensitive NH3 sensor using Pt catalyzed silica coating over WO3 thick films10.1016/j.snb.2008.01.066 ↗
14. Low temperature CO sensitive nanostructured WO3 thin films doped with Fe10.1016/j.snb.2011.11.038 ↗
15. Low pressure chemically vapor deposited WO3 thin films for integrated gas sensor applications10.1149/1.1838463 ↗
16. Reduced transition metal oxides as electron injection layers in hybrid-PLEDs10.1016/j.mee.2011.05.017 ↗
17. Semiconducting oxides as gas-sensitive resistors10.1016/S0925-4005(99)00133-1 ↗
18. Grain size effects on gas sensitivity of porous SnO2-based elements10.1016/0925-4005(91)80207-Z ↗
19. Detection of dilute nitrogen dioxide and thickness effect of tungsten oxide thin film sensors10.1016/S0925-4005(03)00417-9 ↗
20. Gas sensing characteristics of Fe-doped tungsten oxide thin films10.1016/j.snb.2012.04.032 ↗
21. Effect of density and thickness on H2-gas sensing property of sputtered SnO2 films10.1016/j.vacuum.2004.09.024 ↗
22. Relationships between sensitivity, catalytic activity, and surface areas of SnO gas sensors10.1016/S0925-4005(99)00245-2 ↗
23. Influence of annealing on microstructure and NO2-sensing properties of sputtered WO3 thin films10.1016/j.snb.2007.06.001 ↗
24. On the dependence of structural and sensing properties of sputtered MoO3 thin films on argon gas flow10.1016/j.apsusc.2014.09.046 ↗
25. Structural and optical properties of WO3 sputtered thin films nanostructured by laser interference lithography10.1016/j.apsusc.2013.03.072 ↗
26. Gas sensing properties of WO3 thin films deposited by rf sputtering10.1016/j.snb.2007.03.031 ↗
27. A comparison of different methods for x-ray diffraction line broadening analysis of Ti and Ag UHV deposited thin films: nanostructural dependence on substrate temperature and film thickness10.1088/0022-3727/39/10/036 ↗
28. Warren · 1969
29. F.H. Chung, D.K. Smith, Industrial Applications of X-ray Diffraction, Marcel Dekker Publisher, 1999.10.1201/b16940 ↗
30. Structural, mechanical and tribological characterization of chromium oxide thin films prepared by post-annealing of Cr thin films10.1016/j.apsusc.2013.07.123 ↗
31. CO2 gas sensing properties of DC reactive magnetron sputtered ZnO thin film10.1016/j.ceramint.2014.05.011 ↗
32. Gas sensing characteristics of WO3 vacuum deposited thin films10.1016/j.snb.2006.10.059 ↗
33. Influence of the annealing and operating temperatures on the gas-sensing properties of rf sputtered WO3 thin-film sensors10.1016/j.snb.2004.06.009 ↗
34. Humidity sensing properties of WO3 thick film resistor prepared by screen printing technique10.1016/j.jallcom.2014.07.073 ↗