journal article·2016-01

Enhanced short circuit current density of dye-sensitized solar cells aided by Sr,V co-doped TiO 2 particles

A.M. Bakhshayesh, N. Bakhshayesh

Publisher page

Abstract

Abstract This study comes up with a straightforward method for preparing uniform electrodes containing Sr,V co-doped TiO 2 particles for dye-sensitized solar cells (DSCs) applications. The spherical particles with the average diameter around 2.5 µm are assembled from small nanoparticles with the average grain size of 60 nm. X-ray diffraction (XRD) reveals that the introduction of dopants not only inhibits the growth of rutile phase, but also results in smaller primary crystallites, improving the surface area and dye adsorption ability of the electrodes. X-ray photoelectron spectroscopy (XPS) showed that Sr 2+ and V 5+ ions are well incorporated into the titania crystal lattice without forming specific Strontium and Vanadium compositions. UV–visible spectra show that the co-doped TiO 2 films have lower band gap energy than that of undoped-TiO 2 , extending the absorption of TiO 2 into visible region. Isolated energy levels in band structure of TiO 2 as well as local lattice distortions due to dopants introduction are the parameters enhanced the short circuit current density of the cells. The TiO 2 DSC co-doped with 0.075 at% Sr and 1.5 at% V (i.e., S7V15 cell) had the highest circuit current density and power conversion efficiency of 18.57 and 7.76%, respectively, as a result of less recombination, which is demonstrated by electrochemical impedance spectroscopy (EIS).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Anatase-stabilised AlxTi1−xO2 photoanodes containing uniform spherical particles for efficient dye-sensitized solar cells10.1016/j.apsusc.2015.01.054 ↗
3. Hydrogen sensing characteristics and mechanism of nanosize TiO2 dope with metallic ions10.1016/j.physb.2009.09.066 ↗
4. Conductivity of surface modified TiO2 dope nanocomposites10.1016/j.measurement.2014.10.012 ↗
5. Improved efficiency of dye-sensitized solar cells by design of a proper double layer photoanode electrodes composed of Cr-doped TiO2 transparent and light scattering layers10.1007/s10971-013-3052-3 ↗
6. Silver-loaded TiO2 powders prepared through mechanical ball milling10.1016/j.ceramint.2013.02.054 ↗
7. C/TiO2 nanohybrids co-doped by N and their enhanced photocatalytic ability10.1016/j.jssc.2012.04.033 ↗
8. Photodegradation of rhodamine B under visible light by bimetal codoped TiO2 nanocrystals10.1016/j.jhazmat.2008.08.041 ↗
9. Microstructures and photocatalytic properties of Ag+ and La3+ surface codoped TiO2 films prepared by sol–gel method10.1016/j.jssc.2011.08.014 ↗
10. The visible light activity of the TiO2 and TiO2:V4+ photocatalyst10.5772/55318 ↗
11. Photocatalytic activity of TiO2 doped with Zn2+ and V5+ transition metal ions: Influence of crystallite size and dopant electronic configuration on photocatalytic activity10.1016/j.mseb.2009.09.008 ↗
12. Self-cleaning properties of vanadium doped TiO2 sol–gel derived thin films10.4236/njgc.2013.33014 ↗
13. Enhanced photocatalytic oxidation of propylene over V-doped TiO2 photocatalyst: reaction mechanism between V5+ and single-electron-trapped oxygen vacancy10.1016/j.apcatb.2015.03.050 ↗
14. Effect of doping TiO2 with alkaline-earth metal ions on its photocatalytic activity10.2298/JSC0704393L ↗
15. Efficient photocatalytic degradation of brilliant green using Sr-doped TiO2 nanoparticles10.1016/j.ceramint.2014.11.010 ↗
16. Synthesis, characterization, and photocatalytic activity of Sr2+ doped TiO2 nanoplates10.1021/ie901191z ↗
17. Enhanced photo-catalytic activity of Sr and Ag co-doped TiO2 nanoparticles for the degradation of direct green-6 and reactive blue-160 under UV & visible light10.1016/j.saa.2015.04.101 ↗
18. Visible-light-response and photocatalytic activities of TiO2 and SrTiO3 photocatalysts codoped with antimony and chromium10.1021/jp0255482 ↗
19. Nickel and either tantalum or niobium-codoped TiO2 and SrTiO3 photocatalysts with visible-light response for H2 or O2 evolution from aqueous solutions10.1039/b502147b ↗
20. Defects in Co-doped and (Co,Nb)-doped TiO2 ferromagnetic thin films10.1063/1.2402979 ↗
21. Improved photovoltaic performance of dye-sensitized solar cells (DSSCs) by Zn+Mg co-doped TiO2 electrode10.1016/j.electacta.2013.02.008 ↗
22. Development of nanostructured porous TiO2 thick film with uniform spherical particles by a new polymeric gel process for dye-sensitized solar cell10.1016/j.electacta.2012.11.060 ↗
23. Uniform nanostructured photoelectrodes made of a zinc-stabilized TiO2 gel for dye-sensitized solar cell applications10.1016/j.mssp.2014.12.042 ↗
24. Facile preparation of anatase-stabilised gels using niobium chloride for efficient dye-sensitized solar cells
25. Control of dark current in photoelectrochemical (TiO2/I−–I3−)) and dye-sensitized solar cells10.1039/b505718c ↗
26. Space charge segregation at grain boundaries in Titanium Dioxide: II, model experiments10.1111/j.1151-2916.1993.tb03965.x ↗
27. Quantitative analysis of anatase–rutile mixtures with an X-ray diffractometer10.1021/ac60125a006 ↗
28. Cullity · 2001
29. High-resolution X-ray photoemission spectrum of the valence bands of gold10.1103/PhysRevB.5.4709 ↗
30. Study on activities of vanadium (IV/V) doped TiO2(R) nanorods induced by UV and visible light10.1016/j.matchemphys.2008.08.009 ↗
31. Effect of annealing temperature on structural and bonded states of titanate nanotube films10.1063/1.2427094 ↗
32. Tauc · 1974
33. Near-UV molar absorptivities of acetone, alachlor, metolachlor, diazinon and dichlorvos in aqueous solution10.1016/j.jphotochem.2005.03.014 ↗
34. Structural characterization of titania by X-ray diffraction, photoacoustic, Raman spectroscopy and electron paramagnetic resonance spectroscopy10.1016/j.saa.2014.08.082 ↗
35. New understanding of the difference of photocatalytic activity among anatase, rutile and brookite TiO210.1039/C4CP02201G ↗
36. Improved performance dye-sensitized solar cells using Nb-Doped TiO2 electrodes: efficient electron injection and transfer10.1002/adfm.200901292 ↗
37. Approach for preparing doped TiO2 single crystals10.1021/am503661w ↗
38. Performance and stability of TiO2 dye solar cells assembled with flexible electrodes and a polymer electrolyte10.1016/S1010-6030(03)00106-0 ↗
39. High surface area electrospun prickle-like hierarchical anatase TiO2 nanofibers for dye-sensitized solar cell photoanodes10.1039/c3ta10925a ↗
40. Band edge movement and recombination kinetics in dye-sensitized nanocrystalline TiO2 solar cells: a study by intensity modulated photovoltage spectroscopy10.1021/jp9714126 ↗
41. Efficient TiO2 photocatalysts from surface hybridization of TiO2 particles with graphite-like carbon10.1002/adfm.200701478 ↗
42. Electron transport in dye-sensitized solar cells based on ZnO nanotubes: evidence for highly efficient charge collection and exceptionally rapid dynamics10.1021/jp810406q ↗
43. Correlation between photovoltaic performance and impedance spectroscopy of dye-sensitized solar cells based on ionic liquids10.1021/jp066178a ↗
44. Novel three-layer TiO2 nanoparticle stacking architecture for efficient dye- sensitized solar cells10.1016/j.orgel.2013.08.014 ↗