Porous dielectric materials based wearable capacitance pressure sensors for vital signs monitoring: A review
Source abstract
Abstract
Electrical transduction-based pressure sensors namely resistance, capacitance, piezoelectric, and triboelectric pressure sensors are deep-rooted in different applications. Resistance and capacitance pressure sensors are widely used in pressure, touch, and tactile sensing applications due to the simple output signal reader and small form factor. Whereas piezoelectric and triboelectric sensors are utilized in dynamic pressure sensing applications. Additionally, the latter two sensors are also used in electric potential generation applications. Recently, many researchers are exploring the possibilities of these sensors for biomedical applications such as vital signs monitor, and body language and motion. Vital signs give information about the homeostasis status which is essential for the human body. Body temperature (BT), heart rate (HR), blood pressure (BP), respiratory rate (RR), oxygen saturation (OSat), and electrolyte balance maintain homeostasis. Parallel plate capacitor (PPC) based pressure sensors are more broadly applied in vital signs monitor than interdigitated capacitor (IDC) architecture. To increase the sensitivity, response rate, and working range of PPC sensors, surface microstructure and porous microstructured dielectric sandwich materials are widely studied. Among these two, porous microstructured sandwich layers were exposed to superior sensitivity and an ample operating range. Recent literature on porous dielectric sandwich layer-based PPC sensors was reviewed and the key points were reported here. Many reports suggest that porous dielectric PPC sensors show high sensitivity due to simultaneous modification of A, d & ε values under external stimuli. Further, challenges in reproducibility of data, sensor design, porosity volume, cost of sensors, and ionic porous dielectric materials were discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Dielectric materials and actuators · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Emerging technologies of flexible pressure sensors: materials, modeling, devices, and manufacturing10.1002/adfm.201808509 ↗
2. Wearable technology for baby monitoring: a review
3. Sensors and Actuators A : physical Development of electrical transduction based wearable tactile sensors for human vital signs monitor : fundamentals , methodologies and applications
4. Recent progress in flexible wearable sensors for vital sign monitoring
5. Rifat · 2018
6. Continuous glucose monitoring using a microneedle array sensor coupled with a wireless signal transmitter10.1016/j.snb.2018.10.081 ↗
7. Development of a third-generation glucose sensor based on the open circuit potential for continuous glucose monitoring10.1016/j.bios.2018.09.099 ↗
8. A wearable pH sensor with high sensitivity based on a flexible charge-coupled device10.1038/s41928-018-0162-5 ↗
9. Noninvasive temperature monitoring for dual-modal tumor therapy based on lanthanide-doped up-conversion nanocomposites10.1016/j.biomaterials.2019.02.014 ↗
10. A high-performances flexible temperature sensor composed of polyethyleneimine/reduced graphene oxide bilayer for real-time monitoring10.1002/admt.201800594 ↗
11. Highly sensitive temperature sensor: ligand-treated Ag nanocrystal thin films on PDMS with thermal expansion strategy10.1002/adfm.201903047 ↗
12. Thermally conductive reduced graphene oxide thin films for extreme temperature sensors10.1002/adfm.201901388 ↗
13. On-skin graphene electrodes for large area electrophysiological monitoring and human-machine interfaces10.1016/j.carbon.2020.03.058 ↗
14. A microfluidic system for stable and continuous eeg monitoring from multiple larval zebrafish
15. Highly conformable stretchable dry electrodes based on inexpensive flex substrate for long-term biopotential (EMG/ECG) monitoring10.1016/j.sna.2019.06.041 ↗
16. Ambulatory evaluation of ECG signals obtained using washable textile-based electrodes made with chemically modified PEDOT:PSS10.3390/s19020416 ↗
17. State-of-the-art and recent developments in micro/nanoscale pressure sensors for smart wearable devices and health monitoring systems
18. Ce pte d M us
19. Skin-contactable and antifreezing strain sensors based on bilayer hydrogels10.1021/acs.chemmater.0c02919 ↗
20. Conductive MXene nanocomposite organohydrogel for flexible, healable, low-temperature tolerant strain sensors10.1002/adfm.201904507 ↗
21. A textile sleeve for monitoring oxygen saturation using multichannel optical fibre photoplethysmography10.3390/s20226568 ↗
22. Heart rate estimation from photoplethysmography signal for wearable health monitoring devices10.1016/j.bspc.2019.01.021 ↗
23. Fiber-optic pulseoximeter for local oxygen saturation determination using a Monte Carlo multi-layer model for calibration10.1016/j.cmpb.2019.105237 ↗
24. Design of low-flow oxygen monitor and control system for respiration and SpO2 rates optimization10.1088/1742-6596/1436/1/012042 ↗
25. Recent developments for flexible pressure sensors: a review10.3390/mi9110580 ↗
26. Progress in achieving high-performance piezoresistive and capacitive flexible pressure sensors: a review10.1016/j.jmst.2019.11.010 ↗
27. Inner egg shell membrane based bio-compatible capacitive and piezoelectric function dominant self-powered pressure sensor array for smart electronic applications10.1039/D0RA02949A ↗
28. All paper-based flexible and wearable piezoresistive pressure sensor10.1021/acsami.9b07465 ↗
29. Piezoelectric pressure sensor based on flexible gallium nitride thin film for harsh-environment and high-temperature applications10.1016/j.sna.2020.111940 ↗
30. Stretchable and highly sensitive optical strain sensors for human-activity monitoring and healthcare10.1021/acsami.9b09815 ↗
31. Flexible and optical fiber sensors composited by graphene and PDMS for motion detection
32. Paper and carbon ink enabled low-cost, eco-friendly, flexible, multifunctional pressure and humidity sensors10.1088/1361-665X/abe87d ↗
33. An integrated wearable wireless vital signs biosensor for continuous inpatient monitoring10.1109/JSEN.2019.2942099 ↗
34. Highly stretchable strain sensors with reduced graphene oxide sensing liquids for wearable electronics10.1039/C7NR09022F ↗
35. Winding-locked carbon nanotubes/polymer nanofibers helical yarn for ultrastretchable conductor and strain sensor10.1021/acsnano.9b09533 ↗
36. Highly Sensitive and Flexible Capacitive Pressure Sensor Based on a Dual-Structured Nanofiber Membrane as the Dielectric for Attachable Wearable Electronics10.1021/acsaelm.1c01098 ↗
37. Human vital signs detection methods and potential using radars: a review10.3390/s20051454 ↗
38. Mini review on flexible and wearable electronics for monitoring human health information10.1186/s11671-019-3084-x ↗
39. Based multiple heterogeneous wearable sensors: a smart real-time health monitoring structured for hospitals distributor10.1109/ACCESS.2019.2898214 ↗
40. Wearable sensor data and self-reported symptoms for COVID-19 detection10.1038/s41591-020-1123-x ↗
41. IOT based wearable sensor for diseases prediction and symptom analysis in healthcare sector, Peer-to-Peer Netw
42. A wearable sensor-based activity prediction system to facilitate edge computing in smart healthcare system10.1016/j.jpdc.2018.08.010 ↗
43. A dynamic and interoperable communication framework for controlling the operations of wearable sensors in smart healthcare applications10.1016/j.comcom.2019.10.004 ↗
44. Integrated cross-section interface engineering and surface encapsulating strategy: a high-response, waterproof, and low-cost paper-based bending strain sensor10.1039/D1TC03031K ↗
45. Flexible Tactile Electronic Skin Sensor with 3D Force Detection Based on Porous CNTs/PDMS Nanocomposites
46. Recent progress in flexible pressure sensor arrays: from design to applications10.1039/C8TC02946F ↗
47. A highly sensitive resistive pressure sensor based on a carbon nanotube-liquid crystal-PDMS composite10.3390/nano8060413 ↗
48. Toward a self-sensing piezoresistive pressure sensor for all-SiC monolithic integration10.1109/JSEN.2020.2998915 ↗
49. Highly ordered 3D porous graphene sponge for wearable piezoresistive pressure sensor applications10.1002/chem.201900014 ↗
50. Flexible capacitive pressure sensor enhanced by tilted micropillar arrays10.1021/acsami.9b03718 ↗
51. A flexible, ultra-highly sensitive and stable capacitive pressure sensor with convex microarrays for motion and health monitoring10.1016/j.nanoen.2019.104436 ↗
52. Highly sensitive flexible capacitive pressure sensor with a broad linear response range and finite element analysis of micro-array electrode
53. Tunable ionic pressure sensor based on 3D printed ordered hierarchical mesh structure10.1016/j.sna.2020.112012 ↗
54. Glycine-chitosan-based flexible biodegradable piezoelectric pressure sensor10.1021/acsami.9b21052 ↗
55. Flexible piezoelectric nanofibers/polydimethylsiloxane-based pressure sensor for self-powered human motion monitoring10.1002/ente.201901242 ↗
56. Fabrication of poly (vinylidene fluoride-trifluoroethylene) – zinc oxide based piezoelectric pressure sensor10.1016/j.sna.2019.111677 ↗
57. A highly reliable, impervious and sustainable triboelectric nanogenerator as a zero-power consuming active pressure sensor10.1039/C9NA00790C ↗
58. Triboelectric nanogenerator versus piezoelectric generator at low frequency (<4 Hz): a quantitative comparison10.1016/j.isci.2020.101286 ↗
59. Hybrid energy cells based on triboelectric nanogenerator: from principle to system10.1016/j.nanoen.2020.104980 ↗
60. Derivation of analytical equations with experimental verification for working mechanism of triboelectric nanogenerators in contact-separation mode10.1016/j.nanoen.2020.104969 ↗
61. Effect of surface texture on the output performance of lateral sliding-mode triboelectric nanogenerator10.1088/1742-6596/1549/4/042095 ↗
62. Influence of the pore size on the sensitivity of flexible and wearable pressure sensors based on porous Ecoflex dielectric layers10.1088/2053-1591/ab091a ↗
63. Flexible pressure sensors for biomedical applications: from ex vivo to in vivo10.1002/admi.202000743 ↗
64. Sensitive pressure sensors based on conductive microstructured air-gap gates and two-dimensional semiconductor transistors10.1038/s41928-019-0356-5 ↗
65. Molecule–graphene hybrid materials with tunable mechanoresponse: highly sensitive pressure sensors for health monitoring
66. One-dimensional nanomaterials for soft electronics10.1002/aelm.201600314 ↗
67. Triboelectric nanogenerators: fundamental physics and potential applications10.1007/s40544-020-0390-3 ↗
68. Review of MXene-based resistance pressure sensors for vital signs monitor10.1007/s11664-022-09456-3 ↗
69. Design strategy for porous composites aimed at pressure sensor application10.1002/smll.201903487 ↗
70. Highly sensitive and flexible piezoresistive sensor based on c-MWCNTs decorated TPU electrospun fibrous network for human motion detection
71. Facilely constructed two-sided microstructure interfaces between electrodes and cellulose paper active layer: eco-friendly, low-cost and high-performance piezoresistive sensor10.1007/s10570-021-03913-8 ↗
72. Piezoresistive thin film pressure sensor based on carbon nanotube-polyimide nanocomposites10.1016/j.sna.2019.06.017 ↗
73. Biomimetic-inspired micro-nano hierarchical structures for capacitive pressure sensor applications
74. Wearable capacitive pressure sensor based on MXene composite nanofibrous scaffolds for reliable human physiological signal acquisition10.1021/acsami.0c05819 ↗
75. PDMS-based capacitive pressure sensor for flexible transparent electronics10.1155/2019/1418374 ↗
76. A do-it-yourself approach to achieving a flexible pressure sensor using daily use materials10.1039/D1TC03102C ↗
77. Peculiarities of performance of piezoelectric sensors under a linear increase in pressure10.1134/S1063776120030103 ↗
78. Highly elastic capacitive pressure sensor based on smart textiles for full-range human motion monitoring10.1016/j.sna.2020.112029 ↗
79. Three-Dimensional Printing of a Flexible Capacitive Pressure Sensor Array in the Assembly Network of Carbon Fiber Electrodes and Interlayer of a Porous Polyurethane Dielectric10.1021/acsaelm.1c00534 ↗
80. Highly sensitive ionic pressure sensor with broad sensing range based on interlaced ridge-like microstructure
81. Anodized aluminum oxide-assisted low-cost flexible capacitive pressure sensors based on double-sided nanopillars by a facile fabrication method10.1021/acsami.9b17966 ↗
82. Rational design of capacitive pressure sensors based on pyramidal microstructures for specialized monitoring of biosignals10.1002/adfm.201903100 ↗
83. A wearable biosensing system with in-sensor adaptive machine learning for hand gesture recognition10.1038/s41928-020-00510-8 ↗
84. Fabrication of a flexible capacitive pressure sensor using full inkjet printing
85. Three-dimensional integrated stretchable electronics10.1038/s41928-018-0116-y ↗
86. Capacitive pressure sensor with wide-range, bendable, and high sensitivity based on the bionic komochi konbu structure and Cu/Ni nanofiber network10.1021/acsami.9b00941 ↗
87. Highly sensitive and flexible capacitive pressure sensor enhanced by weaving of pyramidal concavities staggered in honeycomb matrix10.1109/JSEN.2020.3008474 ↗
88. A flexible capacitive sensor based on the electrospun PVDF nanofiber membrane with carbon nanotubes10.1016/j.sna.2019.111579 ↗
89. Contact-free biosignal acquisition via capacitive and ultrasonic sensors10.1109/ACCESS.2020.2995861 ↗
90. Protrusion microstructure-induced sensitivity enhancement for zinc oxide–carbon nanotube flexible pressure sensors10.1021/acsaelm.1c00930 ↗
91. Transparent, flexible, conformal capacitive pressure sensors with nanoparticles10.1002/smll.201870032 ↗
92. Diaphragm shape effect on the performance of foil-based capacitive pressure sensors10.1063/1.5128475 ↗
93. Highly sensitive active-matrix driven self-capacitive fingerprint sensor based on oxide thin film transistor10.1038/s41598-019-40005-x ↗
94. Energy harvesting applications using piezoelectric sensors10.2139/ssrn.3672979 ↗
95. Fabrication and characterization of AlN-based flexible piezoelectric pressure sensor integrated into an implantable artificial pancreas10.1038/s41598-019-53713-1 ↗
96. A review on real-time implantable and wearable health monitoring sensors based on triboelectric nanogenerator approach10.1016/j.nanoen.2020.105566 ↗
97. A fully self-powered vibration monitoring system driven by dual-mode triboelectric nanogenerators10.1021/acsnano.9b10142 ↗
98. A highly efficient triboelectric negative air ion generator10.1038/s41893-020-00628-9 ↗
99. A calibration-free self-powered sensor for vital sign monitoring and finger tap communication based on wearable triboelectric nanogenerator10.1016/j.nanoen.2019.01.069 ↗
100. Cumulative charging behavior of water droplet driven freestanding triboelectric nanogenerators toward hydrodynamic energy harvesting10.1039/D0TA01698E ↗