Influence of Al/Cu thickness ratio and deposition sequence on photoelectric property of ZnO/Al/Cu/ZnO multilayer film on PET substrate prepared by RF magnetron sputtering
Source abstract
Abstract
Abstract ZnO/Al/Cu/ZnO multilayer films were deposited on flexible polyethylene terephthalate (PET) substrates by radio frequency (RF) magnetron sputtering. The overall thickness of the intermediate Al and Cu metal layers maintained at 8 nm. The four different Al/Cu thickness ratios were 7:1, 6:2, 5:3 and 4:4. Other four reference samples were prepared by using the same process, i.e. ZnO single-layer film, ZnO/Al8 (8-nm-thick Al layer, the same below)/ZnO, ZnO/Cu8/ZnO and ZnO/Cu2/Al6/ZnO multilayer films. The effects of Al/Cu thickness ratio and deposition sequence of Al and Cu layers were investigated. The results revealed that with the increase of Cu layer thickness, sheet resistance of the multilayer film decreased, while transmittance increased first and then decreased. The ZnO/Al6/Cu2/ZnO multilayer film with a sheet resistance of 108 Ω/sq and an average visible transmittance of 84.73% had the optimum overall photoelectric property, being confirmed by the highest figure of merit of 1.77 × 10–3 Ω–1. Furthermore, ZnO/Cu2/Al6/ZnO and ZnO/Al6/Cu2/ZnO multilayer films exhibited almost the same average visible transmittance and sheet resistance, implying that the deposition sequence of Al and Cu layers has little influence on photoelectric properties. It is demonstrated that ZnO/Al/Cu/ZnO multilayer flexible films have great potential in various fields.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Surface Modification and Superhydrophobicity · Optical Coatings and Gratings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Characterization of ZnO nanowires grown on Ga-doped ZnO transparent conductive thin films: effect of deposition temperature of Ga-doped ZnO thin films10.1016/j.ceramint.2015.10.122 ↗
2. Effect of solar spectrum on the performance of various thin-film PV module technologies in tropical Singapore10.1109/JPHOTOV.2014.2328585 ↗
3. Low-voltage transparent electric-double-layer ZnO-based thin-film transistors for portable transparent electronics10.1063/1.3294325 ↗
4. Optical display film as flexible and light trapping substrate for organic photovoltaics10.1364/OE.24.00A974 ↗
5. Development of phase-pure CuSbS2 thin films by annealing thermally evaporated CuS/Sb2S3 stacking layer for solar cell applications10.1016/j.mssp.2018.02.029 ↗
6. Determination of optical constant and dispersion parameters of Se75Sb10In15 thin film characterized by wide band gap10.1007/s00339-017-0794-8 ↗
7. Effects of processing parameters on crystalline structure and optoelectronic behavior of DC sputtered ITO thin film10.1007/s10854-016-5591-1 ↗
8. Novel approach for fabricating transparent and conducting SWCNTs/ITO thin films for optoelectronic applications10.1021/acs.jpcc.7b10977 ↗
9. Influence of post-deposition annealing on structural, optical and transport properties of nanocomposite ZnO-Ag thin films10.1016/j.mssp.2018.03.002 ↗
10. Reversible wettability control of ZnO thin films synthesized by hydrothermal process on different buffer layers10.1016/j.matlet.2013.08.023 ↗
11. Effects of post-deposition thermal annealing temperature on electrical properties of ZnON thin-film transistors
12. Cu-Ag bi-layer films in dielectric/metal/dielectric transparent electrodes as ITO free electrode in organic photovoltaic devices10.1016/j.orgel.2016.12.030 ↗
13. A flexible sandwich graphene/silver nanowires/graphene thin film for high-performance electromagnetic interference shielding10.1039/C6RA18652A ↗
14. Properties of fluorine-doped tin oxide films prepared by an improved sol-gel process10.1016/j.mssp.2016.09.038 ↗
15. Hole transport layer free inorganic CsPbIBr2 perovskite solar cell by dual source thermal evaporation10.1002/aenm.201502202 ↗
16. Nitrogen doped n-type amorphous carbon films obtained by pulsed laser deposition with a natural camphor source target for solar cell applications10.1088/0953-8984/17/12/016 ↗
17. Kinetic and mechanistic study of the chemical vapor deposition of titanium dioxide thin films using tetrakis‐(isopropoxo)‐titanium(IV)10.1116/1.579173 ↗
18. Electron-beam assisted physical vapor deposition of polycrystalline silicon films10.1016/j.mssp.2011.05.011 ↗
19. Thin film deposition using spray pyrolysis10.1007/s10832-005-0870-x ↗
20. Transparent ZnO thin-film transistor fabricated by rf magnetron sputtering10.1063/1.1553997 ↗
21. Superhydrophobic and anti-reflective ZnO nanorod-coated FTO transparent conductive thin films prepared by a three-step method10.1016/j.jallcom.2016.03.086 ↗
22. Effect of a ZnO buffer layer on structural and electrical properties of ZnO:Al,P thin films grown by RF magnetron sputtering10.1016/j.ceramint.2017.05.164 ↗
23. A comparative study of different M(M = Al, Ag, Cu)/FTO bilayer composite films irradiated with nanosecond pulsed laser10.1016/j.jallcom.2014.08.107 ↗
24. Enhancing optical and electrical properties of Al-doped ZnO coated polyethylene terephthalate substrates by laser annealing using overlap rate controlling strategy10.1016/j.ceramint.2016.01.118 ↗
25. Investigation of the optical and electrical properties of ZnO/Cu/ZnO multilayers grown by atomic layer deposition10.1016/j.jallcom.2018.02.115 ↗
26. Preparation, growth and characterization of nonvacuum Cu-doped ZnO thin films10.1016/j.molstruc.2018.03.053 ↗
27. Effect of Cu layer thickness on the structural, optical and electrical properties of AZO/Cu/AZO tri-layer films10.1016/j.vacuum.2010.03.008 ↗
28. On optical reflection at heterojunction interface of thin film solar cells10.1016/j.solmat.2012.12.035 ↗
29. Surface plasmon resonance effect of Cu nanoparticles in a dye sensitized solar cell10.1016/j.electacta.2017.07.187 ↗
30. Plasmon-exciton coupling of monolayer MoS2-Ag nanoparticles hybrids for surface catalytic reaction10.1016/j.mtener.2017.05.005 ↗
31. One-step fabrication of Cu nanoparticles on silicate glass substrates for surface plasmonic sensors10.1016/j.jnoncrysol.2018.05.018 ↗
32. Influence of microstructure on the optical property of plasma-sprayed Al, Cu, and Ag coatings10.1016/j.matdes.2016.08.090 ↗
33. Layer-by-layer growth of ZnO epilayer on Al2O3(0001) by using a MgO buffer layer10.1063/1.125817 ↗
34. Effect of Al/Cu ratios on the optical, electrical, and electrochemical properties of Cu-Al-Ca-O thin films10.1016/j.jallcom.2014.04.146 ↗
35. Influence of annealing temperature on formation and photoelectric properties of AZO nanosheet-coated FTO-based films10.1007/s10854-016-6112-y ↗
36. Development of the research on the structure of the aggregated state of parylene C film
37. Dependence of film thickness on the electrical and optical properties of ZnO-Cu-ZnO multilayers10.1016/j.apsusc.2006.01.035 ↗
38. Roll-to-Roll sputtered ITO/Cu/ITO multilayer electrode for flexible, transparent thin film heaters and electrochromic applications10.1038/srep33868 ↗
39. Optical and optoelectronic properties of ZnS nanostructured thin film10.12693/APhysPolA.114.713 ↗