Control of Cu doping and CdTe/Te interface modification for CdTe solar cells
Source abstract
Abstract
Abstract Copper doping in polycrystalline CdTe thin films and optimal band alignment at the CdTe/back-contact interface are critical for obtaining high performance devices. A CuCl2 solution treatment was used in this work to enhance the p-doping of CdTe. The carrier density of CdTe was increased from 4.72 × 1013 to 1.11 × 1014 cm−3 and the open circuit voltage of the device was obviously improved more than ~50 mV from 728 to 783 mV. In order to further improve device performance, Te/Cu bilayer using rapid thermal processing was implemented to reduce barrier at the back contact. The short time-high temperature process efficiently activated the Te/Cu bilayer back contact and precisely controlled the Cu diffusion. The proper dose of Cu diffusion can further increase the p-doping of CdTe (~2.22 × 1014 cm−3), resulting in the apparent increase in response from the CdS spectral region. The chemical reaction occurred between Te and Cu after rapid thermal processing treatments causing the formation of the CuxTe phases, which can form a barrier in the conduction band to reflect electrons and reduce recombination at the back contact. With the increase of the temperature, the open circuit voltage of the device increased. However, the device with excessive Cu contacted at higher temperature showed the reduction in response in the long-wavelength region and decrease in fill factor due to the formation of much more Cu-related recombination states. Finally, open circuit voltage of > 820 mV, and fill factor of > 72% for CdTe solar cells with an area of 0.24 cm2 were achieved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Catalyst- and template-free low-temperature in situ growth of n-type CdS nanowire on p-type CdTe film and p-n heterojunction properties10.1038/srep38858 ↗
2. Doping of polycrystalline CdTe for high-efficiency solar cells on flexible metal foil10.1038/ncomms3306 ↗
3. A.D. Compaan, J.R. Sites, R.W. Birkmire, C.S. Ferekides, A.L. Fahrenbruch, Critical issues and research needs for CdTe-based solar cells, in Photovoltaics for the 21st Century, Eds: V. K. Kapur, R. D. McConnell, D. Carlson, G. P. Ceasar, and A. Rohatgi, 99 241-245, 1999.
4. High-fefficiency polycrystalline CdTe thin-film solar cells10.1016/j.solener.2004.06.006 ↗
5. Time evolution to CdCl2 treatment on Cd-based solar cell devices fabricated by vapor evaporation10.1016/j.solener.2017.05.013 ↗
6. First‐principles study of doping limits of CdTe10.1002/1521-3951(200201)229:1<305::AID-PSSB305>3.0.CO;2-3 ↗
7. Cross-sectional mapping of hole concentrations as a function of copper treatment in CdTe photovoltaic devices10.1002/pip.2576 ↗
8. Role of oxygen during CdTe growth for CdTe photovoltaic devices10.1002/pip.2547 ↗
9. Chemical trends of defect formation and doping limit in II-VI semiconductors: the case of CdTe10.1103/PhysRevB.66.155211 ↗
10. Effect of copassivation of Cl and Cu on CdTe grain boundaries10.1103/PhysRevLett.101.155501 ↗
11. Copper impurity behavior in CdTe films10.1002/pssa.2210590112 ↗
12. Impurity doping and compensation mechanisms in CdTe10.1016/S0040-6090(00)01717-X ↗
13. Development of thin-film Cu(In,Ga)Se2 and CdTe solar cells10.1002/pip.527 ↗
14. Processing options for CdTe thin film solar cells10.1016/j.solener.2004.04.012 ↗
15. A photoemission determination of the band diagram of the Te/CdTe interface10.1063/1.359444 ↗
16. J. Li, J.D. Beach, C.A. Wolden, Rapid thermal processing of ZnTe:Cu contacted CdTe solar cells, Photovoltaic Specialist Conference, 2014, pp. 2360–2365.10.1109/PVSC.2014.6925401 ↗
17. Dependence of carrier lifetime on Cu-contacting temperature and ZnTe: Cu thickness in CdS/CdTe thin film solar cells10.1016/j.tsf.2008.11.008 ↗
18. Electrical characterization of Cu composition effects in CdS/CdTe thin-film solar cells with a ZnTe: Cu back contact10.1109/JPHOTOV.2013.2257919 ↗
19. Controlled activation of ZnTe: Cu contacted CdTe solar cells using rapid thermal processing10.1016/j.solmat.2014.10.045 ↗
20. Back contact formation using Cu2Te as a Cu-doping source and as an electrode in CdTe solar cells10.1016/S0927-0248(02)00157-5 ↗
21. Single-phase control of CuTe thin films for CdTe solar cells10.1016/j.vacuum.2017.05.014 ↗
22. The formation of different phases of CuxTe and their effects on CdTe/CdS solar cells10.1016/j.tsf.2007.03.032 ↗
23. Te/Cu bi-layer: a low-resistance back contact buffer for thin film CdS/CdTe solar cells10.1016/j.solmat.2014.06.010 ↗
24. Carrier density and lifetime for different dopants in single-crystal and polycrystalline CdTe10.1063/1.4966209 ↗
25. The role of carrier concentration and interface, bulk, and grain-boundary recombination for 25% efficient CdTe solar cells10.1063/1.4984320 ↗
26. Optimizing CdTe solar cell performance: impact of variations in minority-carrier lifetime and carrier density profile10.1109/JPHOTOV.2011.2164952 ↗
27. Relationship of open-circuit voltage to CdTe hole concentration and lifetime10.1109/JPHOTOV.2016.2598260 ↗
28. Strategies to increase CdTe solar-cell voltage10.1016/j.tsf.2006.12.147 ↗
29. Surface science studies of Cu containing back contacts for CdTe solar cells10.1016/j.tsf.2006.12.054 ↗
30. Interface engineering of inorganic thin-film solar cells-materials-science challenges for advanced physical concepts10.1002/adma.200802457 ↗
31. Intrinsic surface passivation of CdTe10.1063/1.4933186 ↗
32. A new simulation software of solar cells—wxAMPS10.1016/j.solmat.2011.10.010 ↗
33. M. Gloeckler, A.L. Fahrenbruch, J.R. Sites, Numerical modeling of CIGS and CdTe solar cells: setting the baseline, Photovoltaic Energy Conversion, 2003. Proceedings of World Conference on, Vol.1, 2003, pp. 491–494.
34. Apparent quantum efficiency effects in CdTe solar cells10.1063/1.1667605 ↗