Fabrication of Sb2S3 solar cells by close space sublimation and enhancing the efficiency via co-selenization
Source abstract
Abstract
As a new-type absorber material, antimony sulfide (Sb 2S 3) possesses the advantages of earth-abundant elemental contents, low-toxic constituents, appropriate photoelectric properties, and unique one-dimensional crystal structure. We utilized the close space sublimation technique to deposit high-quality Sb 2S 3 thin-film with ( hk1)-preferred orientation by controlling source temperature. Then, Sb 2S 3 thin film solar cells with the superstrate structure of FTO/CdS/Sb 2S 3/Au were fabricated, achieving a conversion efficiency of 2.86%. To further enhance efficiency, co-selenization process was employed in the Sb 2S 3 thin films by co-sublimation, which improve the crystallinity of films, increase grain size and form stronger ( hk 1)-preferred orientation. In addition, co-selenization process can adjust band gap value and enhance junction quality. By these approaches, we enhanced the short circuit current density (Jsc) of Sb 2S 3 solar cell efficiently. The Sb 2S 3 solar cell fabricated by CSS achieved an efficiency of 4.45% using co-selenization process. These methods can be applied to other chalcogenides thin-film solar cells, providing a practical way for the device performance improvement.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Solar cell efficiency tables (version 56)10.1002/pip.3303 ↗
2. Effect of pulse bias voltages on performance of CdTe thin film solar cells prepared by pulsed laser deposition10.1016/j.solener.2020.11.041 ↗
3. A review of thin film solar cell technologies and challenges10.1016/j.rser.2016.12.028 ↗
4. Preparation and characterization of CuSbSe2 thin films deposited by pulsed laser deposition10.1016/j.mssp.2021.105716 ↗
5. Sb2S3 solar cells10.1016/j.joule.2018.04.003 ↗
6. Review of recent progress in antimony chalcogenide‐based solar cells: materials and devices10.1002/solr.201900026 ↗
7. Tabulated values of the Shockley–Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
8. REFINEMENT OF CRYSTAL-STRUCTURE OF STIBNITE, Sb2S310.1524/zkri.1972.135.3-4.308 ↗
9. The fundamental absorption-edge and electronic-structure in Sb2S310.1143/JPSJ.56.3734 ↗
10. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries10.1038/nphoton.2015.78 ↗
11. In situ growth of [hk1]‐Oriented Sb2S3 for solution‐processed planar heterojunction solar cell with 6.4% efficiency10.1002/adfm.202002887 ↗
12. Solution-processed Sb2S3 planar thin film solar cells with a conversion efficiency of 6.9% at an open circuit voltage of 0.7 V achieved via surface passivation by a SbCl3 interface layer10.1021/acsami.9b15148 ↗
13. High temperature CSS processed CdTe solar cells on commercial SnO2:F/SnO2 coated soda-lime glass substrates10.1007/s10854-015-2923-5 ↗
14. The role of O2 in CdSeTe thin film deposition and CdSeTe/CdTe solar cell performance
15. Study of CdTe/ZnTe composite absorbing layer deposited by pulsed laser deposition for CdS/CdTe solar cell10.1016/j.mssp.2017.05.009 ↗
16. The large-area CdTe thin film for CdS/CdTe solar cell prepared by physical vapor deposition in medium pressure10.1016/j.apsusc.2015.11.058 ↗
17. Fabrication of Sb2S3 planar thin film solar cells with closed-space sublimation method
18. Scalable and efficient Sb2S3 thin-film solar cells fabricated by close space sublimation10.1063/1.5090773 ↗
19. Doping strategies in Sb2 S3 thin films for solar cells10.1002/smll.202100241 ↗
20. Sb2(Se1‐xSx)3 thin‐film solar cells fabricated by single‐source vapor transport deposition10.1002/solr.201800280 ↗
21. Analysis of predicted and observed current densities in antimony sulfide selenide thin film solar cells and prospects for efficiency improvement10.1149/2162-8777/abaaf6 ↗
22. Over 6% certified Sb2(S,Se)3 solar cells fabricated via in situ hydrothermal growth and postselenization
23. Water additive enhanced solution processing of alloy Sb2(S 1− x Se x)3 ‐based solar cells10.1002/solr.201900582 ↗
24. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
25. Fabrication of Sb2S3 thin films by magnetron sputtering and post-sulfurization/selenization for substrate structured solar cells
26. Postsurface selenization for high performance Sb2S3 planar thin film solar cells10.1021/acsphotonics.7b00858 ↗
27. Development of antimony sulfide–selenide Sb2(S, Se)3-based solar cells10.1016/j.jechem.2017.09.031 ↗
28. Speight · Lange’s Handbook of Chemistry · 2005 · 1 · 199
29. Sb2Se3 thin film solar cells prepared by pulsed laser deposition
30. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
31. Preparation and characterization of pulsed laser deposited CdSe window layer for Sb2Se3 thin film solar cell10.1007/s10854-020-03954-y ↗
32. Tunable quasi-one-dimensional ribbon enhanced light absorption in Sb2Se3 thin-film solar cells grown by close-space sublimation10.1002/solr.201800128 ↗
33. High open‐circuit voltage in full‐inorganic Sb2S3 solar cell via modified Zn‐doped TiO2 electron transport layer10.1002/solr.202000551 ↗
34. Screening and optimization of processing temperature for Sb2Se3 thin film growth protocol: interrelation between grain structure, interface intermixing and solar cell performance
35. Fabrication of Sb2S3 thin films by sputtering and post-annealing for solar cells10.1016/j.ceramint.2018.10.155 ↗
36. Antimony(III) sulfide thin films as a photoanode material in photocatalytic water splitting10.1021/acsami.5b12178 ↗
37. Structural properties of Sb2S3 under pressure: evidence of an electronic topological transition10.1038/srep24246 ↗
38. Sereni · 2010 · 1131
39. Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency10.1038/s41467-018-04634-6 ↗
40. Quasiepitaxy strategy for efficient full‐inorganic Sb2 S3 solar cells10.1002/adfm.201901720 ↗
41. A fast chemical approach towards Sb2S3 film with a large grain size for high-performance planar heterojunction solar cells10.1039/C7NR00154A ↗
42. The low-temperature preparation for crystalline Sb2S3 thin films and photovoltaic performance of the corresponding solar cells10.1016/j.solener.2021.01.061 ↗
43. Combination of full-coverage Sb2S3 thin films and spiro-OMeTAD:P3HT hybrid hole transporting materials for efficient solar cells10.1039/D1NJ01095F ↗
44. The complex defect chemistry of antimony selenide10.1039/C9TA02022E ↗
45. Complicated and unconventional defect properties of the quasi-one-dimensional photovoltaic semiconductor Sb2Se310.1021/acsami.9b01220 ↗
46. Over 7% efficiency of Sb 2(S,Se)3 solar cells via V‐shaped bandgap engineering10.1002/solr.202000220 ↗
47. Direct solution deposition of device quality Sb2S3-xSex films for high efficiency solar cells10.1016/j.solmat.2018.04.009 ↗
48. Effects of substrate temperature and SnO2 high resistive layer on Sb2Se3 thin film solar cells prepared by pulsed laser deposition