journal article·2019-03

Efficiency enhancement of dye-sensitized solar cell based gel polymer electrolytes using Poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate)/tetrapropylammonium iodide

N.K. Farhana, S. Ramesh, K. Ramesh

Publisher page

Abstract

Abstract Due to liquid electrolyte limitation in dye sensitized solar cells (DSSCs), GPEs were prepared and optimized. Poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate), P(VB-co-VA-co-VAc) acted as host polymer and tetrapropylammonium iodide, TPAI as dopant salt. The prepared gel polymer electrolytes (GPEs) with different TPAI salt content were characterized using electrochemical impedance spectroscopy, Fourier transform infrared spectroscopy and X ray diffractogram. An optimum ionic conductivity of 1.93 mS cm−1 was obtained with 40 wt% of TPAI salt added along with the lowest activation energy of 0.064 eV. Temperature dependence ionic conductivity behaviour of GPEs were studied and found that the systems obeyed the Arrhenius behaviour in the temperature range of 303–373 K. The dielectric results studies showed typical behaviour of both e ′ and e ′ ′ inversely proportional to frequency and directly proportional to temperature. Structural studies of GPEs were performed using XRD and FTIR and confirmed the existence of complexation of P(VB-co-VA-co-VAc) and TPAI salt. GPEs were used to assemble dye sensitized solar cells (DSSCs). The power conversion efficiency of 4.615% achieved with a maximum short circuit current density (Jsc) of 13.585 mA cm−2, open circuit voltage (Voc) of 0.678 V and fill factor of 50.1% at 40 wt% TPAI salt under A.M 1.5 (100 mW cm−2) illumination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Polyoxometalates: Synthesis and Applications · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Advancing beyond current generation dye-sensitized solar cells10.1039/b809672d ↗
2. Polymer electrolytes and perovskites: lights and shadows in photovoltaic devices10.1016/j.electacta.2015.02.195 ↗
3. Effect of cation size on solid polymer electrolyte based dye-sensitized solar cells10.1021/la8029177 ↗
4. Exploration on the P(VP-co-vac) copolymer based gel polymer electrolytes doped with quaternary ammonium iodide salt for DSSC applications: electrochemical behaviors and photovoltaic performances
5. Exploration on polypropylene carbonate polymer for gel polymer electrolyte preparation and dye-sensitized solar cell application10.1002/app.45091 ↗
6. Quasi solid state polymer electrolyte with binary iodide salts for photo-electrochemical solar cells10.1016/j.ijhydene.2013.05.163 ↗
7. Solid terpolymer electrolyte based on poly(vinyl butyral-co-vinyl alcohol-co-vinyl acetate) incorporated with lithium salt and tetraglyme for EDLCs10.1002/app.45902 ↗
8. N. Geisari, M. Kalnins, Poly(vinyl alcohol) - Poly(vinyl acetate) Composite Films from Water Systems: Formation, Strength-deformation Characteristics, Fracture, in: Proceedings of the IOP Conference Ser. Mater. Sci. Eng., vol. 111, no. 1, 2016, pp. 0–6.10.1088/1757-899X/111/1/012009 ↗
9. Use of lithium iodide and tetrapropylammonium iodide in gel electrolytes for improved performance of quasi-solid-state dye-sensitized solar cells: recording an efficiency of 6.40%10.1016/j.electacta.2016.01.108 ↗
10. “Lattice energies and hydration thermodynamics of tetra-alkylammonium halides10.1063/1.1672196 ↗
11. Effect of cation size on the performance of dye sensitizednanocrystalline TiO2solar cells based on quasi-solid state PANelectrolytes containing quaternary ammonium iodides10.1016/j.electacta.2013.07.089 ↗
12. Influence of different iodide salts on the performance of dye-sensitized solar cells containing phosphazene-based nonvolatile electrolytes10.1021/jp106033y ↗
13. Performance enhancement of poly (vinylidene fluoride-co-hexafluoro propylene)/polyethylene oxide based nanocomposite polymer electrolyte with ZnO nanofiller for dye-sensitized solar cell
14. From crab shell to solar cell: a gel polymer electrolyte based on N-phthaloylchitosan and its application in dye-sensitized solar cells10.1039/C6RA04188D ↗
15. Degradation of ultra-high molecular weight poly(methyl methacrylate-co-butyl acrylate-co-acrylic acid) under ultra violet irradiation10.1039/C6RA25313J ↗
16. Exploring the effect of novel N-butyl-6-methylquinolinium bis(trifluoromethylsulfonyl)imide ionic liquid addition to poly(methyl methacrylate-co-methacrylic) acid electrolyte system as employed in gel-state dye sensitized solar cells10.1016/j.electacta.2017.04.097 ↗
17. High efficient dye sensitized solar cells using phthaloylchitosan based gel polymer electrolytes10.1016/j.electacta.2017.06.011 ↗
18. Ionic conductivity by correlated barrier hopping in NH4I doped chitosan solid electrolyte10.1016/j.physb.2008.12.027 ↗
19. Electrical conductivity studies of polyvinyl chloride-based electrolytes with double salt system10.1016/S0167-2738(00)00598-1 ↗
20. Preparation and characterization of poly (ethyl methacrylate) based polymer electrolytes doped with 1-butyl-3-methylimidazolium trifluoromethanesulfonate10.1016/j.measurement.2013.11.025 ↗
21. Dielectric and FTIR studies on blending of [xPMMA-(1 - X)PVC] with LiTFSI10.1016/j.measurement.2013.01.003 ↗
22. Structure, thermal and transport properties of PVAc-LiClO4solid polymer electrolytes10.1016/j.jpcs.2006.12.001 ↗
23. Conductivity, dielectric studies and structural properties of P(VA-co-PE) and its application in dye sensitized solar cell
24. Amelioration of electrochemical and photovoltaic performances on P(VP-co-VAc) based gel polymer electrolyte by incorporating double salt for dye-sensitized solar cells10.1002/app.43805 ↗
25. Influence of organic additive to PVDF-HFP mixed iodide electrolytes on the photovoltaic performance of dye-sensitized solar cells10.1016/j.jpcs.2016.10.007 ↗
26. Influences of cation charge density on the photovoltaic performance of dye-sensitized solar cells: lithium, sodium, potassium, and dimethylimidazolium10.1039/c1cp21020c ↗
27. Binary ionic liquid electrolyte for dye-sensitized solar cells10.1016/j.proeng.2016.06.453 ↗