Copper oxides for energy storage application: Novel pulse alternating current synthesis
Source abstract
Abstract
Abstract Copper oxide powders (CuOx) were reported to be electrochemically obtained under pulse alternating current by a facile and inexpensive one-pot method. The effect of the synthesis conditions on the copper electrode oxidation rate and product morphology and composition was studied. The CuOx products were characterized by X-ray powder diffraction (XRD), Raman spectroscopy, X-ray absorption near-edge structure (XANES) spectroscopy, energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Depending on the synthesis conditions, the powders reveal different morphologies and composition, such as Cu2O octahedra, Cu2O decorated with CuO or Cu2O-CuO bilayered composite. Cyclic voltammetry and charge-discharge measurements were used to study the electrochemical energy conversion properties of the materials. The results of the electrocatalytic study indicate that the powder with Cu2O-CuO bilayered polyhedra is suitable for use in methanol oxidation; and the powder with Cu2O octahedra has shown a good specific capacitance for supercapacitors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Nanostructured energy materials for electrochemical energy conversion and storage: a review10.1016/j.jechem.2016.11.003 ↗
2. Anode catalysts for direct methanol fuel cells in acidic media: do we have any alternative for Pt or Pt–Ru?10.1021/cr400389f ↗
3. Materials for electrochemical capacitors10.1038/nmat2297 ↗
4. Review on supercapacitors: technologies and materials10.1016/j.rser.2015.12.249 ↗
5. An electrochemical method to prepare of Pd/Cu2O/MWCNT nanostructure as an anode electrocatalyst for alkaline direct ethanol fuel cells10.1016/j.electacta.2016.02.100 ↗
6. S. Xie, M. Zhang, P. Liu, S. Wang, S. Liu, H. Feng, H. Zheng, F. Cheng, Advanced negative electrode of Fe2O3/graphene oxide paper for high energy supercapacitors, Mat. Res. Bull.
7. Facile synthesis of three dimensional flower-like Co3O4@MnO2 core-shell microspheres as high-performance electrode materials for supercapacitors10.1016/j.ceramint.2017.01.148 ↗
8. Reduced graphene oxide–cuprous oxide hybrid nanopowders: solvothermal synthesis and electrochemical performance10.1016/j.mssp.2014.08.045 ↗
9. Recent advances in tuning crystal facets of polyhedral cuprous oxide architectures10.1039/C3RA45445B ↗
10. Controlled synthesis of copper nano/microstructures using ascorbic acid in aqueous CTAB solution10.1016/j.powtec.2009.11.022 ↗
11. CuO nanostructures: synthesis, characterization, growth mechanisms, fundamental properties, and applications10.1016/j.pmatsci.2013.09.003 ↗
12. Recent advances in hybrid Cu2O-based heterogeneous nanostructures10.1039/C5NR02178B ↗
13. A rapid, one pot microwave assisted synthesis of nanosize cuprous oxide10.1016/j.powtec.2012.11.006 ↗
14. Photocatalytic activity of CuO and Cu2O nanowires10.1016/j.mssp.2015.08.008 ↗
15. Template-free solvothermal synthesis of copper oxide nanorods10.1016/j.mssp.2014.05.045 ↗
16. Structural and electrocatalytic properties of Pt/C and Pt-Ni/C catalysts prepared by electrochemical dispersion10.1134/S0023158413020146 ↗
17. Pt/SnOx-C composite material for electrocatalysis10.1016/j.mencom.2014.11.013 ↗
18. Electrochemical dispersion method for the synthesis of SnO2 as anode material for lithium ion batteries10.1007/s10800-016-0936-2 ↗
19. Electrochemical dispergation as a simple and effective technique toward preparation of NiO based nanocomposite for supercapacitor application10.1016/j.electacta.2013.10.031 ↗
20. Electrochemical preparation of cuprous oxide powder: Part I. Basic electrochemistry10.1007/BF01094312 ↗
21. Electrochemical corrosion of unalloyed copper in chloride media––a critical review10.1016/S0010-938X(02)00257-3 ↗
22. Raman-scattering study of ion-implantation-produced damage in Cu2O10.1103/PhysRevB.12.20 ↗
23. Synthesis of novel Cu2O micro/nanostructural photocathode for solar water splitting10.1016/j.electacta.2013.05.003 ↗
24. In-situ Raman monitoring of stress evaluation and reaction in Cu2O oxide layer10.1016/j.matlet.2012.03.015 ↗
25. Raman study of CuO single crystals10.1103/PhysRevB.41.7192 ↗
26. Facile preparation of Cu2O microcrystals with morphologies of octahedron, half circular and rectangular plates by anodic dissolution of bulk Cu in alkaline aqueous solutions10.1016/j.electacta.2010.08.081 ↗
27. Additive-mediated electrochemical synthesis of platelike copper crystals for methanol electrooxidation10.1021/la4027078 ↗
28. Copper salts mediated morphological transformation of Cu2O from cubes to hierarchical flower-like or microspheres and their supercapacitors performances10.1038/srep09672 ↗
29. Direct synthesis of RGO/Cu2O composite films on Cu foil for supercapacitors10.1016/j.jallcom.2013.10.078 ↗