journal article·2002-08

Doubleside polishing—a technology mandatory for 300mm wafer manufacturing

G Wenski, T Altmann, W Winkler, G Heier, G Hölker

Publisher page

Abstract

Abstract 300 mm silicon wafers exclusively receive simultaneous doubleside polishing (DSP) as stock-removal polishing; reasons are reduced risk of particle adherence due to a rough backsurface, improved plane-parallelism as a result of the free-floating polishing process, and benefits in terms of nanotopography. In DSP, the wafers are guided in openings of carrier plates on a geometric path between two counter-rotating polishing platens covered with suitable pads in the presence of caustic SiO2-based slurry. DSP path curves for wafer movement relative to the upper and lower pads can be calculated and optimized. In the so-called “thick carrier” DSP process, the carrier plate thickness is selected only about 1–5 μm lower than the final wafer thickness. In combination, both measures allow the formation of a sharp wafer edge without rolloff and yield excellent local flatness, e.g. SFQRmax values around or below 100 nm which are required for leading-edge device generations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advancements in Photolithography Techniques · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Jackson KA, Schröter W, editors. Handbook of semiconductor technology, vol. 2. Weinheim: Wiley, 1999. p. 1–66.
2. Brehm G, et al. EP 208 315 B1, 1987.
3. Hashimoto S, et al. US 6,180,423 B1, 2001.
4. Lee KH, et al. US 6,315,641 B1, 2001.
5. Wenski G, et al. DE 101 32 504 C1, 2002.10.1127/0340-269X/2002/0032-0101 ↗
6. ITRS 2001 Edition. http://public.itrs.net, Front End Processes, Table 49a.
7. Wenski G, et al. DE 199 05 737 C2, 2000; DE 199 38 340 C1, 2001; DE 199 56 250 C1, 2001; DE 100 12 840 C2, 2001.
8. Wenski G, et al. DE 100 23 002 A1, 2001.10.1016/S0149-2918(01)80161-2 ↗