Influence of Co2O3 doping on the microstructure and electrical properties of ZnO–Bi2O3-based varistors
Source abstract
Abstract
In this work, the microstructure (for instance grain size and elemental distribution) and comprehensive electrical performances of ZnO–Bi 2O 3–Cr 2O 3–MnO 2 varistors, with various amounts of Co 2O 3 prepared via the traditional solid-state sintering method were investigated. The influences of Co 2O 3 doping on the microstructure of the ZnO varistors were evaluated via X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectrometer (EDS), while the effects on the electrical performance of the ZnO varistors were analyzed via voltage source meter and inductance-capacitance-resistance meter. The experimental results indicate that Co 2O 3 doping can contribute to improve the electrical characteristics of ZnO varistors. The double Schottky barrier height φ b and nonlinearity coefficient α was enhanced significantly. Meanwhile, Co 2O 3 doping can effectively reduce ZnO grain resistivity ρ g and increase grain boundary resistivity ρ gb. In this research, there was an optimal content of Co 2O 3 (0.5 mol%), the α of the ZnO varistors reaches the maximum value of 46.7 and the φ b reaches the maximum value of 0.63 eV with the optimal content.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Transition Metal Oxide Nanomaterials · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Investigation of dielectric relaxation and degradation behavior of two-step sintered ZnO varistors10.1016/j.ceramint.2019.07.201 ↗
2. B2O3- and Y2O3-doped ZnO varistor ceramics: enhanced voltage gradientand nonlinear properties for UHV10.1016/j.mssp.2020.105590 ↗
3. Effect of sintering process on the electrical properties and microstructure of Ca-doped ZnO varistor ceramics10.1016/j.mssp.2021.105880 ↗
4. Influence of SiO2 on electrical properties of the highly nonlinear ZnO-Bi2O3-MnO2 varistors10.1016/j.jeurceramsoc.2017.05.014 ↗
5. Non-ohmic effect and pulse aging behavior of V/Mn/Co/Bi/Dy co-doped ZnO semiconducting varistors with sintering processing10.1016/j.mssp.2014.04.035 ↗
6. Novel zinc-oxide varistor with superior p-erformance in voltage gradient and aging stability for surge arrester10.1016/j.jallcom.2019.02.310 ↗
7. Effect of TiO2 doping on microstructural and electrical properties of ZnO-Pr6O11-based varistor ceramics10.1016/j.jallcom.2010.03.047 ↗
8. Effects of raw particle size and annealing on microstructure, electrical and mechanical behaviors of ZnO-based varistors10.1016/j.jallcom.2021.159638 ↗
9. Low-temperature sintering and electrical properties of Co-doped ZnO varistors10.1007/s10854-014-2102-0 ↗
10. Simultaneously enhanced electrical stability and nonlinearity in ZnO varistor ceramics: role of Si-stabilized δ-Bi2O3 phase10.1016/j.jeurceramsoc.2020.12.008 ↗
11. Effect of MnCO3 on ZnO-Pr6O11-Co2O3-Cr2O3 varistor ceramics
12. Influence of Cr2O3 on highly nonlinear properties and low leakage current of ZnO-Bi2O3 varistor ceramics10.1016/j.ceramint.2016.03.042 ↗
13. The effect of SiO2 on electrical properties of low-temperature-sintered ZnO-Bi2O3-TiO2-Co2O3-MnO2-based ceramics10.1111/jace.14575 ↗
14. Grain growth in sintered ZnO and ZnO-Bi2O3 ceramics10.1111/j.1151-2916.1990.tb05099.x ↗
15. Grain growth of ZnO during Bi2O3 liquid-phase sintering10.1111/j.1151-2916.1992.tb05607.x ↗
16. Effects of Sb2O3 on the microstructure and electrical properties of ZnO–Bi2O3-based varistor ceramics fabricated by two-step solid-state reaction route10.1016/j.ceramint.2021.03.276 ↗
17. Mechanism of Ga2O3 addition on the enhancement of electrical and mechanical properties of ZnO based varistor10.1016/j.ceramint.2020.09.293 ↗
18. ZnO nanopowders doped with bismuth oxide, from synthesis to electrical application10.1016/j.jallcom.2019.03.251 ↗
19. Effect of Pr6O11 doping on the microstructure and electrical properties of ZnO varistors10.1016/j.ceramint.2019.08.219 ↗
20. Effects of the Er2O3 doping on the microstructure and electrical properties of ZnO-Bi2O3 based varistor ceramics10.1016/j.ceramint.2021.08.132 ↗
21. Influence of Cr2O3 on ZnO- Bi2O3-MnO2-based varistor ceramics10.1016/j.ceramint.2014.02.035 ↗
22. Revisiting the effects of Co2O3 on multiscale defect structures and relevant electrical properties in ZnO varistors10.1049/hve.2019.0419 ↗
23. Application of zinc oxide varistors10.1111/j.1151-2916.1990.tb05232.x ↗
24. High nonlinearity in 0.1 mol.% In2O3 added ZnO-V2O5 based varistors prepared at different sintering temperatures10.1016/j.ceramint.2021.09.058 ↗
25. Two stage sintering behaviour of Er2O3 doped high performance ZnO varistors10.1016/j.jeurceramsoc.2021.04.009 ↗
26. Effects of pre-calcination and sintering temperature on the microstructure and electrical properties of ZnO-based varistor ceramics10.1016/j.mssp.2020.105529 ↗