journal article·2019-04Open access

Effect of high temperature annealing (T > 1650 °C) on the morphological and electrical properties of p-type implanted 4H-SiC layers

M. Spera, D. Corso, S. Di Franco, G. Greco, A. Severino, P. Fiorenza, F. Giannazzo, F. Roccaforte

Abstract

This work reports on the effect of high temperature annealing on the electrical properties of p-type implanted 4H-SiC. Ion implantations of Aluminium (Al) at different energies (30 - 200 keV) were carried out to achieve 300 nm thick acceptor box profiles with a concentration of about 1020 at/cm3. The implanted samples were annealed at high temperatures (1675-1825 °C). Morphological analyses of the annealed samples revealed only a slight increase of the surface roughness RMS up to 1775°C, while this increase becomes more significant at 1825°C (RMS=1.2nm). Room temperature Hall measurements resulted in a hole concentration in the range 0.65-1.34x1018/cm3 and mobility values in the order of 21-27 cm2V-1s-1. The temperature dependent electrical measurements allowed to estimate an activation energy of the Al-implanted specie of about 110 meV (for the post-implantation annealing at 1675°C) and a fraction of active p-type Al-dopant ranging between 39% and 56%. The results give useful indications for the fabrication of 4H-SiC JBS and MOSFETs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Semiconductor materials and devices · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Kimoto · 2014
2. Challenges for energy efficient wide band gap semiconductor power devices10.1002/pssa.201300558 ↗
3. Emerging trends in wide band gap semiconductors (SiC and GaN) technology for power devices10.1016/j.mee.2017.11.021 ↗
4. Ion Implantation in 4H-SiC10.1016/j.nimb.2007.12.049 ↗
5. Electrical activation of high-concentration aluminum implanted in 4H-SiC10.1063/1.1796518 ↗
6. Electrical properties of n- and p-type 4H-SiC formed by ion implantation into high-purity semi-insulating substrates10.7567/JJAP.56.070306 ↗
7. Defects related to electrical doping of 4H-SiC by ion implantation10.1016/j.mssp.2017.10.021 ↗
8. Electrical transport properties of aluminium-implanted 4H-SiC10.1063/1.1978987 ↗
9. Electrical and topographical characterization of aluminium implanted layers in 4H silicon carbide10.1002/pssb.200743510 ↗
10. High temperature implantation of aluminum in 4H silicon carbide10.4028/www.scientific.net/MSF.556-557.587 ↗
11. Electrical transport properties of p-type 4H-SiC10.1002/pssa.201600679 ↗
12. Analysis of the hole transport through valence band states in heavy Al doped 4H-SiC by ion implantation10.1063/1.4852515 ↗
13. The doping concentration of indium-doped silicon measured by Hall, C-V and junction breakdown techniques10.1063/1.324424 ↗
14. Temperature and doping dependence of electrical properties of Al-doped 4H-SiC epitaxial layers10.1063/1.3158565 ↗
15. Electrical and optical characterization of SiC10.4028/www.scientific.net/MSF.433-436.365 ↗
16. Hall scattering factors in p-type 4H-SiC with various doping concentrations10.7567/APEX.9.041301 ↗
17. Structural and transport properties in alloyed Ti/Al Ohmic contacts formed on p-type Al-implanted 4H-SiC annealed at high temperature10.1088/0022-3727/44/25/255302 ↗
18. Controlling the carbon vacancy concentration in 4H-SiC subjected to high temperature treatment10.4028/www.scientific.net/MSF.858.414 ↗
19. Protection of selectively implanted and patterned silicon carbide surfaces with graphite capping layer during post-implantation annealing10.1088/0268-1242/20/3/003 ↗
20. About the electrical activation of 1 × 1020 cm−3 ion implanted Al in 4H-SiC at annealing temperatures in the range 1500–1950 °C10.4028/www.scientific.net/MSF.924.333 ↗
21. Electrical characterization of Al Implanted 4H-SiC layers by four point probe and scanning capacitance microscopy10.4028/www.scientific.net/MSF.615-617.457 ↗
22. Microwave annealingof very high dose aluminum implanted 4H-SiC10.1143/APEX.4.111301 ↗
23. High temperature high dose implantation of aluminumin 4H-SiC10.1063/1.1764934 ↗
24. Metal/Semiconductor contacts to silicon carbide: physics and technology10.4028/www.scientific.net/MSF.924.339 ↗
25. Electrical and structural properties of surfaces and interfaces in Ti/Al/Ni Ohmic contacts to p-type implanted 4H-SiC10.1016/j.apsusc.2017.05.065 ↗
26. Electrical properties of pure silicon and silicon alloys containing boron and phosphorus10.1103/PhysRev.75.865 ↗