MXene decorated tungsten trioxide nanocomposite-based sensor capable of detecting NO2 gas down to ppb-level at room temperature
Source abstract
Abstract
In this study, we reported the fabrication of WO 3/Ti 3C 2T X nanocomposite-based sensing platform for the sub-ppb detection of NO 2 gas at room temperature. The WO 3/Ti 3C 2T X nanocomposite comprising WO 3 nanoparticles and two-dimensional Ti 3C 2T X (MXene) was prepared using a one-step hydrothermal method. The morphological and structural characterizations of the WO 3/Ti 3C 2T X nanocomposite were performed using field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Raman spectroscopy, and nitrogen adsorption–desorption techniques. Further, the gas sensing properties of the WO 3/Ti 3C 2T X nanocomposite-based sensors were investigated by estimating their sensing response and selectivity toward different target gases at room temperature. The WO 3/Ti 3C 2T X nanocomposite-based sensor exhibited high response toward 15–500 ppb of NO 2. In particular, the fabricated sensor showed a high response of 78, which was approximately eight times higher than the pristine WO 3-based sensor (9.8) with short response time (182 s) and recovery time (75 s) toward 200-ppb NO 2 at room temperature. The improved sensing characteristics were attributed to the synergistic behavior of WO 3 nanoparticles and the layered morphology of 2D Ti 3C 2T X that provides large number of gas adsorption sites and highly conducting pathway for efficient charge transportation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Gas Sensing Nanomaterials and Sensors · 2D Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Monitoring and mathematical modeling of soil and groundwater contamination by harmful emissions of nitrogen dioxide from motor vehicles10.3390/su13052768 ↗
2. Invited perspective: the NO2 and mortality dilemma solved? Almost there10.1289/EHP10286 ↗
3. Gold-loaded tellurium nanobelts gas sensor for ppt-level NO2 detection at room temperature10.1016/j.snb.2021.131300 ↗
4. A review on 2D transition metal di-chalcogenides and metal oxide nanostructures based NO2 gas sensors10.1016/j.mssp.2019.104865 ↗
5. Exposed crystal facets of WO3 nanosheets by phase control on NO2-sensing performance
6. H2S sensing material Pt-WO3 nanorods with excellent comprehensive performance10.1016/j.jallcom.2021.163398 ↗
7. Defect manipulation of WO3 nanostructures by yttrium for ultra-sensitive and highly selective NO2 detection10.1016/j.snb.2021.131057 ↗
8. Chemo-resistive NO2 sensor using La-doped WO3 nanoparticles synthesized by flame spray pyrolysis10.1016/j.snb.2022.132247 ↗
9. P-type Sb doping hierarchical WO3 microspheres for superior close to room temperature ammonia sensor10.1016/j.snb.2022.131365 ↗
10. Hierarchical WS2–WO3 nanohybrids with P–N heterojunctions for NO2 detection10.1021/acsanm.0c03094 ↗
11. Nanowires-assembled WO3 nanomesh for fast detection of ppb-level NO2 at low temperature10.1007/s40145-019-0343-3 ↗
12. Ultrasensitive ppb-level NO2 gas sensor based on WO3 hollow nanosphers doped with Fe10.1016/j.apsusc.2017.10.074 ↗
13. Design of Au@WO3 core−shell structured nanospheres for ppb-level NO2 sensing10.1016/j.snb.2018.11.142 ↗
14. Effect of heat treatment on WO3 nanostructures based NO2 gas sensor low-cost device10.1016/j.matchemphys.2021.124731 ↗
15. Porosity and oxygen vacancy engineering of mesoporous WO3 nanofibers for fast and sensitive low-temperature NO2 sensing10.1016/j.jallcom.2020.157339 ↗
16. High-sensitive NO2 sensor based on p-NiCo2O4/n-WO3 heterojunctions10.1016/j.snb.2021.130912 ↗
17. Synthesis of WO3 nanorods by thermal oxidation technique for NO2 gas sensing application10.1016/j.mssp.2018.06.022 ↗
18. Carbon nanotube-metal oxide nanocomposite gas sensing mechanism assessed via NO2 adsorption on n-WO3/p-MWCNT nanocomposites10.1016/j.ceramint.2020.08.097 ↗
19. Enhanced NO2 sensing properties of Pt/WO3 films grown by glancing angle deposition10.1016/j.ceramint.2020.05.236 ↗
20. Bilayer polyaniline–WO3 thin-film sensors sensitive to NO210.1021/acsomega.9b04122 ↗
21. Ag decorated WO3 sensor for the detection of sub-ppm level NO2 concentration in air10.1016/j.mssp.2019.104613 ↗
22. ppb level detection of NO2 using a WO3 thin film-based sensor: material optimization, device fabrication and packaging10.1039/C7RA13659E ↗
23. Design of nanoneedles-studded nanosheets on cactus-like Mo-WO3 nanoarchitecture for boosted NO2 sensing performance10.1016/j.cplett.2022.139500 ↗
24. MXetronics: MXene-enabled electronic and photonic devices10.1021/acsmaterialslett.9b00419 ↗
25. MXene-based gas sensors10.1039/D1TC04085E ↗
26. Enhanced ammonia response of Ti3C2Tx nanosheets supported by TiO2 nanoparticles at room temperature10.1016/j.snb.2019.126874 ↗
27. Recent advances in MXene–based electrochemical sensors and biosensors10.1016/j.trac.2019.115643 ↗
28. Metallic Ti3C2Tx MXene gas sensors with ultrahigh signal-to-noise ratio10.1021/acsnano.7b07460 ↗
29. Titanium-carbide MXenes for work function and interface engineering in perovskite solar cells10.1038/s41563-019-0478-1 ↗
30. CuO nanoparticles/Ti3C2Tx MXene hybrid nanocomposites for detection of toluene gas10.1021/acsanm.0c00749 ↗
31. In situ formation of multiple Schottky barriers in a Ti3C2 MXene film and its application in highly sensitive gas sensors10.1002/adfm.202003998 ↗
32. 2D/2D SnO2 nanosheets/Ti3C2Tx MXene nanocomposites for detection of triethylamine at low temperature10.1016/j.ceramint.2021.12.089 ↗
33. In2O3 nanocubes/Ti3C2Tx MXene composites for enhanced methanol gas sensing properties at room temperature10.1016/j.ceramint.2021.05.016 ↗
34. Enhanced ammonia sensing performance based on MXene-Ti3C2Tx multilayer nanoflakes functionalized by tungsten trioxide nanoparticles10.1016/j.jcis.2021.03.115 ↗
35. Mesoporous MXene/ZnO nanorod hybrids of high surface area for UV-activated NO2 gas sensing in ppb-level10.1016/j.snb.2021.131087 ↗
36. Edge-enriched Mo2TiC2Tx/MoS2 heterostructure with coupling interface for selectively NO2 monitoring
37. Facile solvothermal synthesis of ZnO/Ti3C2Tx MXene nanocomposites for NO2 detection at low working temperature10.1016/j.snb.2022.132025 ↗
38. Highly sensitive and selective NO2 sensor of alkalized V2CTx MXene driven by interlayer swelling10.1016/j.snb.2021.130150 ↗
39. Enhanced blocking effect: a New strategy to improve the NO2 sensing performance of Ti3C2Tx by γ-Poly(l-glutamic acid) modification10.1021/acssensors.1c00132 ↗
40. MXene modulated SnO2 gas sensor for ultra-responsive room-temperature detection of NO210.1016/j.snb.2022.131427 ↗
41. Enhanced NO2 gas-sensing performance of 2D Ti3C2/TiO2 nanocomposites by in-situ formation of Schottky barrier10.1016/j.apsusc.2021.150747 ↗
42. MXene/WS2 hybrids for visible-light-activated NO2 sensing at room temperature10.1039/D1CC03474J ↗
43. 2H-MoS2/Ti3C2Tx MXene composites for enhanced NO2 gas sensing properties at room temperature
44. NO2 and H2 sensing properties for urchin-like hexagonal WO3 based on experimental and first-principle investigations10.1016/j.ceramint.2018.12.075 ↗
45. Monolayer Ti2CO2: a promising candidate for NH3 sensor or capturer with high sensitivity and selectivity10.1021/acsami.5b03737 ↗
46. NaDos: a real-time, wearable, personal exposure monitor for hazardous organic vapors10.1016/j.snb.2017.09.122 ↗
47. 2D Ti3C2 MXene/WO3 hybrid architectures for high-rate supercapacitors10.1002/admi.201801361 ↗
48. Electrospinning of flexible poly(vinyl alcohol)/MXene nanofiber-based humidity sensor self-powered by monolayer molybdenum diselenide piezoelectric nanogenerator
49. SnO-SnO2 modified two-dimensional MXene Ti3C2Tx for acetone gas sensor working at room temperature10.1016/j.jmst.2020.07.040 ↗
50. Halloysite nanotubes: natural, environmental-friendly and low-cost nanomaterials for high-performance humidity sensor10.1016/j.snb.2020.128204 ↗
51. Enhancing the visible light induced photocatalytic properties of WO3 nanoparticles by doping with vanadium10.1016/j.jpcs.2021.110169 ↗
52. Facile preparation of amorphous carbon-coated tungsten trioxide containing oxygen vacancies as photocatalysts for dye degradation10.1007/s10853-019-03645-y ↗
53. Oxygen vacancies enhanced WO3/BiVO4 photoanodes modified by cobalt phosphate for efficient photoelectrochemical water splitting10.1021/acsaem.1c00145 ↗
54. Synthesis and characterization of oxygen vacancy induced narrow bandgap tungsten oxide (WO3−x) nanoparticles by plasma discharge in liquid and its photocatalytic activity10.1007/s11090-020-10073-3 ↗
55. Facile strategy for synthesizing non-Stoichiometric monoclinic structured tungsten trioxide (WO3−x) with plasma resonance absorption and enhanced photocatalytic activity10.3390/nano8070553 ↗
56. Modification of SnO2 surface oxygen vacancies through Er doping for ultralow NO2 detection10.1016/j.materresbull.2020.111051 ↗
57. Ultrasensitive yttrium modified tin oxide thin film based sub-ppb level NO2 detector10.1016/j.snb.2020.129169 ↗
58. Water sorption in MXene/polyelectrolyte multilayers for ultrafast humidity sensing10.1021/acsanm.8b02265 ↗
59. High performance humidity sensing property of Ti3C2Tx MXene-derived Ti3C2Tx/K2Ti4O9 composites10.1016/j.snb.2020.128969 ↗
60. Rare earth-tuned oxygen vacancies in gadolinium-doped tin oxide for selective detection of volatile organic compounds
61. Surface termination dependent work function and electronic properties of Ti3C2Tx MXene10.1021/acs.chemmater.9b00414 ↗
62. Multifunctional poly(vinyl alcohol)/Ag nanofibers-based triboelectric nanogenerator for self-powered MXene/tungsten oxide nanohybrid NO2 gas sensor10.1016/j.nanoen.2021.106410 ↗