Dielectric constant, dielectric loss and thermal conductivity of Si3N4 ceramics by hot pressing with CeO2–MgO as sintering aid
Source abstract
Abstract
Abstract Dense silicon nitride ceramic was sintered by hot pressing at 1800 °C for 3 h under the uniaxial pressure of 40 MPa in N2 atmosphere using CeO2–MgO as sintering aid. In this study, the effect of the addition of CeO2–MgO on the sintering of silicon nitride ceramics was investigated. The equiaxed α-Si3N4 was transformed into a rod-shaped β-Si3N4 completely by using XRD and SEM analysis. The sample reached a maximum density of 98.2% and a high flexural strength (872 ± 65 MPa). The range of dielectric constant is 10.79–11.06 (12.4 GHz), and the dielectric loss is in the order of 10 E−3. The highest thermal conductivity achieved in all samples is 45.5 W/mK.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Comparative study of oxide and non-oxide additives in high thermal conductive and high strength Si3N4 ceramics10.1016/j.ceramint.2016.08.051 ↗
2. The effect of BaTiO3 addition on the dielectric constant of Si3N4 ceramics10.1111/ijac.12862 ↗
3. Mechanical properties and thermal conductivity of Si3N4 ceramics with YF3 and MgO as sintering additives10.1016/j.ceramint.2016.07.024 ↗
4. Tanaka · 1991
5. Effect of the Y2O3 additive concentration on the properties of a silicon nitride ceramic substrate10.1016/j.ceramint.2016.09.001 ↗
6. Effect of ZrB2 content on phase assemblage and mechanical properties of Si3N4–ZrB2 ceramics prepared at low temperature10.1111/jace.15860 ↗
7. Low temperature densification of silicon nitride materials10.1016/j.jeurceramsoc.2006.04.010 ↗
8. Pressureless sintering of silicon nitride with lithia and yttria10.1016/j.jeurceramsoc.2003.10.015 ↗
9. Pressureless sintering of silicon nitride with additives of the Y2O3-Al2O3-SiO2 system10.1016/0921-5093(89)90620-5 ↗
10. Microstructure and mechanical properties of silicon nitride ceramics prepared by pressureless sintering with MgO-Al2O3 -SiO2 as sintering additive10.1016/j.jeurceramsoc.2004.08.025 ↗
11. Low temperature pressureless sintering of dense silicon nitride using BaO-Al2O3-SiO2 glass as sintering aid
12. Sintering behavior, microstructures and mechanical properties of porous CaO-Al2O3-SiO2-Si3N4 glass-ceramics10.1016/j.jallcom.2018.09.231 ↗
13. Gas pressure sintering of BN/Si3N4 wave-transparent material with Y2O3-MgO nanopowders addition
14. Effects of different types of rare earth oxide additives on the properties of silicon nitride ceramic substrates10.1016/j.ceramint.2019.03.176 ↗
15. Effects of yttria and magnesia on densification and thermal conductivity of sintered reaction-bonded silicon nitrides10.1111/jace.16015 ↗
16. Radio-frequency negative permittivity in the graphene/silicon nitride composites prepared by spark plasma sintering10.1111/jace.15283 ↗
17. Isotropic Si3N4 ceramics fabricated by low-pressure spark plasma sintering in combination with direct coagulation casting10.1016/j.ceramint.2019.01.155 ↗
18. Fabrication of β-Si3N4 with high thermal conductivity under ultra-high pressure10.1016/j.ceramint.2018.09.030 ↗
19. Ye · 2018 · vol. 44 · 3664
20. High-temperature vaporization behavior of oxides II. Oxides of Be, Mg, Ca, Sr, Ba, B, Al, Ga, in, Tl, Si, Ge, Sn, Pb, Zn, Cd, and Hg10.1063/1.555799 ↗
21. A review of: “ sintering of ceramics10.1080/10426910701623956 ↗
22. Dielectric and thermal properties of AlN ceramics10.1016/j.jeurceramsoc.2006.11.023 ↗