journal article·2018-06

Preparation of porous silicon/Pd-loaded WO 3 nanowires for enhancement of ammonia sensing properties at room temperature

Xiaoyong Qiang, Ming Hu, Boshuo Zhao, Yue Qin, Tianyi Zhang, Liwei Zhou, Jiran Liang

Publisher page

Abstract

Abstract A sensitive resistive-type gas sensor based on porous silicon (PS)/Pd-loaded WO3 nanowires (NWs) was successfully synthesized via facile methods for detection of ammonia at room temperature. PS/WO3 NWs was synthesized by thermal evaporating W powder on the PS substrate, and Pd nanoparticles were decorated on the surface of WO3 NWs by in-situ reduction method. Compared with PS/WO3 NWs and Pd-loaded WO3 NWs, the PS/Pd-loaded WO3 NWs showed an enhanced response to ammonia at a low concentration down to 1 ppm and exhibited good selectivity, short response-recovery time at room temperature. The improved sensing characteristics indicated that the decoration of Pd NPs is effective for enhancing gas sensing performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Nanoscale metal oxide-based heterojunctions for gas sensing: a review10.1016/j.snb.2014.07.074 ↗
2. Growth of tungsten oxide nanorods onto porous silicon and their sensing properties for NO210.1016/j.matlet.2013.01.095 ↗
3. Chemical synthesis of zinc oxide nanorods for enhanced hydrogen gas sensing10.1088/1674-1056/23/1/018504 ↗
4. Selective detection of NO2 and C2H5OH using a Co3O4-decorated ZnO nanowire network sensor10.1039/c0cc05256f ↗
5. SnO2-CuO nanocomposite thin film sensor for fast detection of H2S gas10.1080/17458080.2012.680930 ↗
6. Novel ruptured Sm2O3–In2O3 porous nanotubes with excellent formaldehyde sensing properties10.1142/S1793604716500727 ↗
7. Preparation and room temperature NO2-sensing performances of porous silicon/V2O5 nanorods10.1088/1674-1056/25/4/040702 ↗
8. Enhanced formaldehyde gas sensing properties of ZnO nanosheets modified with graphene10.1007/s13391-017-6245-z ↗
9. Enhancement of gas-sensing characteristics of hydrothermally synthesized WO3 nanorods by surface decoration with Pd nanoparticles10.1016/j.snb.2015.09.108 ↗
10. NH3 sensing characteristics of nano-WO3 thin films deposited on porous silicon10.1166/jnn.2010.2815 ↗
11. Sensors for the nitrogen oxides, NO2, NO and N2O, based on In2O3 and WO3 nanowires10.1007/s00339-006-3707-9 ↗
12. Diameter controlled synthesis of tungsten oxide nanorod bundles for highly sensitive NO2 gas sensors10.1016/j.snb.2013.03.086 ↗
13. Template-free synthesis and assembly of single-crystalline tungsten oxide nanowires and their gas-sensing properties10.1002/anie.200502823 ↗
14. Acetylene gas sensing properties of an Ag-loaded hierarchical ZnO nanostructure-decorated reduced graphene oxide hybrid10.1016/j.snb.2015.04.028 ↗
15. Room temperature NO2gas sensing of Au-loaded tungsten oxide nanowires/porous silicon hybrid structure10.1088/1674-1056/25/2/028102 ↗
16. Highly selective hydrogen sensing of Pt-loaded WO3 synthesized by hydrothermal/impregnation methods10.1016/j.ijhydene.2014.01.184 ↗
17. Pd-loaded In2O3 nanowire-like network synthesized using carbon nanotube templates for enhancing NO2 sensing performance10.1039/C4RA14580A ↗
18. Electrolytic shaping of germanium and silicon10.1002/j.1538-7305.1956.tb02385.x ↗
19. Fast and reversible hydrogen sensing properties of Pd/Mg thin film modified by hydrophobic porous silicon substrate10.1016/j.snb.2015.02.098 ↗
20. Effect of TiO2 functionalization on nano-porous silicon for selective alcohol sensing at room temperature10.1016/j.jmst.2016.10.010 ↗
21. Sputtering temperature dependent growth kinetics and CO2 sensing properties of ZnO deposited over porous silicon10.1016/j.spmi.2016.07.028 ↗
22. Effect of gas sensing properties by Sn-Rh codoped ZnO nanosheets10.1007/s13391-016-6053-x ↗
23. Importance of the nanograin size on the H2S-sensing properties of ZnO–CuO composite nanofibers10.1016/j.snb.2015.03.012 ↗
24. Effect of etching current density on microstructure and NH3-sensing properties of porous silicon with intermediate-sized pores10.1016/j.electacta.2013.06.106 ↗
25. Pd sensitized porous silicon hydrogen sensor-Influence of ZnO thin film10.1016/j.snb.2010.03.044 ↗
26. Ammonia gas sensing behavior of graphene surface decorated with gold nanoparticles10.1016/j.sse.2012.05.059 ↗
27. Gas sensors based on carbon nanoflake/tin oxide composites for ammonia detection10.1016/j.jhazmat.2013.12.049 ↗
28. Enhancement of sensitivity in gas chemiresistors based on carbon nanotubes surface functionalized with noble metal (Au, Pt) nanoclusters10.1063/1.2722207 ↗
29. Phase stability of noble metal loaded WO3 for SO2 sensor applications10.1016/j.snb.2012.08.084 ↗
30. Ethanol and ozone sensing characteristics of WO3 based sensors activated by Au and Pd10.1016/j.snb.2006.02.015 ↗
31. Highly sensitive and selective hydrogen sulfide and toluene sensors using Pd functionalized WO3 nanofibers for potential diagnosis of halitosis and lung cancer10.1016/j.snb.2013.12.011 ↗
32. Au-doped WO3-based sensor for NO2 detection at low operating temperature10.1016/j.snb.2008.04.018 ↗
33. Highly sensitive and selective hydrogen gas sensor using sputtered grown Pd decorated MnO2 nanowalls10.1016/j.snb.2016.04.152 ↗
34. Metal oxides for solid-state gas sensors: what determines our choice?10.1016/j.mseb.2007.01.044 ↗