Role of substrate temperature on spray pyrolysed metastable π-SnS thin films
Source abstract
Abstract
Abstract We report the synthesis of π-SnS thin films using a pneumatic chemical spray pyrolysis technique. The substrate temperature was varied in the range 300–400 °C to optimise the suitable growth condition and to investigate its effect on the phase stability of π-SnS. X-ray diffraction (XRD) pattern indicated the formation of π-SnS with a lattice constant of a = 11.59 A. Films deposited at a substrate temperature of 325 °C exhibited higher crystallinity with a larger crystallite size. Besides that, the phase formation of π-SnS was confirmed using Raman spectroscopy vibrational modes. The direct optical band gap varied from 1.61 to 1.82 eV with the variation of substrate temperature. Needle shaped grain morphology was obtained in the scanning electron microscopy (SEM) micrographs. The defects present in the as-deposited films are determined using Photoluminescence (PL) spectra. Hall measurement studies showed that thin films has an n-type conductivity with resistivity in the range 10–103 Ωcm and mobility of the carriers 0.47–1.97 cm2/V with the variation of substrate temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Synthesis and characterisation of co-evaporated tin sulphide thin films10.1007/s00339-005-3475-y ↗
2. Influence of temperature and pressure on the electronic transitions in SnS and SnSe semiconductors10.1103/PhysRevB.41.5227 ↗
3. A review on binary metal sulfide heterojunction solar cells10.1016/j.solmat.2019.109963 ↗
4. Growth and properties of cubic SnS films prepared by chemical bath deposition using EDTA as the complexing agent10.1016/j.jallcom.2016.08.066 ↗
5. Substrate influences on the properties of SnS thin films deposited by chemical spray pyrolysis technique for photovoltaic applications10.1007/s10853-016-0039-9 ↗
6. Structural, optical, and electrical properties of tin sulfide thin film grown by spray pyrolysis10.1016/j.tsf.2008.11.026 ↗
7. Synthesis and characterization of Fe-doped SnS thin films by chemical bath deposition technique for solar cells applications10.1063/1.4830256 ↗
8. Detailed characterization of good-quality SnS thin films obtained by chemical solution deposition at different reaction temperatures10.1016/j.mssp.2018.09.009 ↗
9. Annealing temperature of nanostructured SnS on the role of the absorber layer10.1016/j.mssp.2018.10.018 ↗
10. New nanocrystalline materials: a previously unknown simple cubic phase in the SnS binary system10.1021/acs.nanolett.5b00209 ↗
11. Metastable cubic tin sulfide: a novel phonon-stable chiral semiconductor10.1063/1.4977868 ↗
12. Cubic and orthorhombic SnS thin-film absorbers for tin sulfide solar cells
13. Exploring novel phase of tin sulfide for photon/energy harvesting materials10.1016/j.solener.2018.05.006 ↗
14. Overcoming efficiency limitations of SnS-based solar cells10.1002/aenm.201400496 ↗
15. Theoretical considerations governing the choice of the optimum semiconductor for photovoltaic solar energy conversion10.1063/1.1722483 ↗
16. Thin film solar cell of SnS absorber with cubic crystalline structure
17. A review of tin {(II)} monosulfide and its potential as a photovoltaic absorber10.1016/j.solmat.2015.12.001 ↗
18. High performance near infrared photodetector based on cubic crystal structure SnS thin film on a glass substrate10.1016/j.matlet.2017.04.077 ↗
19. Comprehensive photoresponse study on high performance and flexible π-SnS photodetector with near-infrared response10.1016/j.mssp.2019.05.019 ↗
20. Large cubic tin sulfide–tin selenide thin film stacks for energy conversion10.1016/j.tsf.2016.07.048 ↗
21. Atomic layer deposition of cubic and orthorhombic phase tin monosulfide10.1021/acs.chemmater.6b05323 ↗
22. Formation of metastable cubic phase in SnS thin films fabricated by thermal evaporation10.1016/j.tsf.2017.08.025 ↗
23. Sulfurization growth and HCl etching processes for cubic-phase SnS thin films
24. Post-deposition thermal treatment of sprayed SnS films10.1016/j.tsf.2017.01.014 ↗
25. Chemically deposited cubic SnS thin films for solar cell applications10.1016/j.solener.2016.09.046 ↗
26. Evaluation of AA-CVD deposited phase pure polymorphs of SnS for thin films solar cells10.1039/C9RA01938C ↗
27. Crystal structure of a large cubic tin monosulfide polymorph: an unraveled puzzle10.1039/C6CE00647G ↗
28. Cubic-structured tin selenide thin film as a novel solar cell absorber
29. Improved structure stability, optical and magnetic Properties of Ca and Ti co-substituted BiFeO3 nanoparticles10.1016/j.apsusc.2016.05.163 ↗
30. Structural, optical and electrical properties of SnxSy thin films grown by spray ultrasonic10.1088/1674-4926/37/3/032001 ↗
31. Raman scattering crystalline assessment of polycrystalline Cu2ZnSnS4 thin films for sustainable photovoltaic technologies: phonon confinement model10.1016/j.actamat.2014.02.035 ↗
32. Phonon confinement effects in the Raman spectrum of nanodiamond10.1103/PhysRevB.80.075419 ↗
33. Synthesis and properties of nanocrystalline π-SnS-a new cubic phase of tin sulphide10.1039/C5RA23092F ↗
34. Structural and vibrational properties of α- and π-SnS polymorphs for photovoltaic applications10.1016/j.actamat.2019.11.016 ↗
35. Spray pyrolysed SnS thin films in n and p type: optimization of deposition process and characterization of samples10.1016/j.jaap.2016.04.016 ↗
36. Fabrication of SnS thin films by the successive ionic layer adsorption and reaction (SILAR) method10.1088/0268-1242/23/12/125013 ↗
37. The physical properties of SnS films grown on lattice-matched and amorphous substrates
38. Vapor−Liquid−Solid growth of one-dimensional tin sulfide (SnS) nanostructures with promising field emission behavior10.1021/am405039j ↗
39. Route to n -type doping in SnS10.1063/1.4918294 ↗
40. Variations in structural and optoelectronic features of thermally co-evaporated SnS films with different Sn contents10.1016/j.tsf.2017.09.031 ↗
41. Band-structure, optical properties, and defect physics of the photovoltaic semiconductor SnS10.1063/1.3675880 ↗
42. Optimization of parameters of chemical spray pyrolysis technique to get n and p-type layers of SnS10.1016/j.tsf.2010.01.040 ↗