Effects of electromagnetic directional solidification conditions on the separation of primary silicon from Al-Si alloy with high Si content
Source abstract
Abstract
Abstract In the present work, a continuous growth model of primary silicon from Al-Si melts was established based on the experimental and numerical data to analyze the separation mechanism of primary silicon from Al-Si alloy with high silicon content during electromagnetic directional solidification process. Results show that the separation of primary Si from Al-Si melts depends on the growth rate of primary Si phase and the solidification rate of the melts. Moreover, the separation and enrichment effects of primary Si during the electromagnetic directional solidification process could be improved by enhancing the bottom cooling conditions of crucible and the stirring strength of Al-Si alloy melts. Finally, the distribution and composition of phases and microstructures of the Al-Si alloy after the electromagnetic directional solidification technique were also analyzed and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Silicon and Solar Cell Technologies · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Effects of hydrogen level and cooling rate on ultimate tensile strength of Al A319 alloy10.3103/S106782121404004X ↗
2. Modification mechanism and microstructural characteristics of eutectic Si in casting Al-Si alloys: a review on experimental and numerical studies10.1007/s11837-014-0968-1 ↗
3. Preparation of primary Al-Si alloy from bauxite tailings by carbothermal reduction process10.1016/S1003-6326(09)60112-6 ↗
4. Preparation of casting alloy ZL101 with primary Al-Si alloy10.1016/S1003-6326(08)60021-7 ↗
5. Effect of Si content on separation and purification of the primary Si phase10.1016/j.seppur.2015.01.005 ↗
6. Si purification by solidification of Al–Si melt with super gravity10.1016/S1003-6326(11)61270-3 ↗
7. Super gravity separation of purified Si from solvent refining with the Al-Si alloy system for solar grade silicon
8. Low-cost solar grade silicon purification process with Al–Si system using a powder metallurgy technique10.1016/j.seppur.2010.11.016 ↗
9. Effect of a high gradient magnetic field on the distribution of the solute Si and the morphology of the primary Si phase10.1016/j.matlet.2009.02.030 ↗
10. Thermodynamics of solar-grade-silicon refining10.1016/S0966-9795(03)00148-1 ↗
11. Refining of Si by the solidification of Si-Al melt with electromagnetic force10.2355/isijinternational.45.967 ↗
12. Removal of B from Si by solidification refining with Si-Al melts10.1007/s11663-005-0076-2 ↗
13. Separation and purification of Si from solidification of hypereutectic Al–Si melt under rotating magnetic field10.1016/j.jcrysgro.2014.04.003 ↗
14. Influence of direct electric current on solidification process of Al-Si alloy10.1016/j.mssp.2016.12.034 ↗
15. Refining of metallurgical grade Si by solidification of Al–Si melt under electromagnetic stirring10.1016/j.jmatprotec.2015.03.012 ↗
16. Enhancing B removal from Si with small amounts of Ti in electromagnetic solidification refining with Al-Si alloy10.1016/j.jallcom.2016.01.127 ↗
17. Si growth by directional solidification of Si-Sn alloys to produce solar-grade Si10.1016/j.jcrysgro.2013.05.024 ↗
18. Effect of solidification conditions on the silicon growth and refining using Si-Sn melt10.1016/j.jcrysgro.2015.08.001 ↗
19. Separation mechanism of primary silicon from hypereutectic Al–Si melts under alternating electromagnetic fields10.1007/s11661-015-2889-1 ↗
20. Effect of electromagnetic stirring on the enrichment of primary silicon from Al-Si melt10.1016/j.jcrysgro.2014.07.035 ↗
21. YOU · 2008
22. A mathematical model for prediction of microporosity in aluminum alloy A35610.1007/s00170-012-4102-7 ↗
23. Refined microstructure of compo cast nanocomposites: the performance of combined neuro-computing, fuzzy logic and particle swarm techniques10.1007/s00521-014-1724-8 ↗
24. The effect of radiative heat transfer characteristics on vacuum directional solidification process of multicrystalline silicon in the vertical Bridgman system10.1016/j.applthermaleng.2015.10.073 ↗
25. Single-step directional solidification technology for solar grade polysilicon preparation10.1016/j.applthermaleng.2016.06.069 ↗
26. Refining of Si by the solidification of Si-Al melt with electromagnetic force10.2355/isijinternational.45.967 ↗
27. Mei · 2010
28. Levenspiel · 1972