Fabrication of Cu 2 (Zn x Mg 1-x )SnS 4 thin films by pulsed laser deposition technique for solar cell applications
Source abstract
Abstract
Abstract In this study, the pulsed laser deposition technique was applied for the preparation and characterization of Cu2(ZnxMg1-x)SnS4 (CZMTS) thin films for solar cell applications. The effects of various zinc/magnesium compositional ratios on the properties of the CZMTS thin films were investigated. The field emission scanning electron microscopy studies revealed that the CZMTS thin films exhibited dense, uniform and smooth surfaces. The X-ray diffraction studies on the as-deposited and annealed CZMTS thin films showed the prominent peak from the (112) plane for kesterite phase Cu2ZnSnS4. The Raman studies on the CZMTS thin films further confirmed formation of kesterite phase and beneficial MoS2 layer. Further, the Hall measurement studies on CZMTS thin films confirmed p-type electrical conductivity behavior. The conductivity increased from 2.31 S/cm to 7.98 S/cm with increased Mg concentration. The X-ray energy dispersive spectroscopy studies revealed formation of stoichiometric thin films. The direct optical band gap for the CZMTS thin films were found to be in the range of 1.3–1.5 eV, suggesting their potential application as a low cost and earth abundant thin film solar cell absorber material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A review on pulsed laser deposited CZTS thin films for solar cell applications10.1016/j.jallcom.2014.09.018 ↗
2. High Efficiency Cu2ZnSn(S,Se)4 solar cells by applying a double In2S3/CdS emitter10.1002/adma.201402373 ↗
3. Next generation promising Cu2(ZnxFe1-x)SnS4 photovoltaic absorber material prepared by pulsed laser deposition technique10.1016/j.matlet.2014.08.118 ↗
4. Kesterites-a challenging material for solar cells10.1002/pip.2156 ↗
5. Monodispersed wurtzite Cu2SnS3nanocrystals by phosphine and oleylamine free facile heat-up technique10.1039/C6CE00296J ↗
6. Induced effects by the substitution of Zn in Cu2ZnSnX4 (X= S and Se)10.1016/j.tsf.2016.02.005 ↗
7. Band tailing and efficiency limitation in kesterite solar cells10.1063/1.4820250 ↗
8. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗
9. Electronic structure and stability of quaternary chalcogenide semiconductors derived from cation cross-substitution of II-VI and I-III-VI2 compounds10.1103/PhysRevB.79.165211 ↗
10. Wurtzite-derived polytypes of kesterite and stannite quaternary chalcogenide semiconductors10.1103/PhysRevB.82.195203 ↗
11. Design of I2–II–IV–VI4 semiconductors through element substitution: the thermodynamic stability limit and chemical trend10.1021/cm500598x ↗
12. The structural, morphological and optical–electrical characteristic of Cu2XSnS4 (X:Cu,Mg) thin films fabricated by novel ultrasonic co-spray pyrolysis10.1016/j.matlet.2016.02.088 ↗
13. Deposition, structure, and optical properties of the quaternary diamond-like compounds I2–II–IV–VI4 (I˭Cu; II=Mg; IV=Si, Ge; VI=S, Se)10.1016/j.jssc.2013.05.039 ↗
14. Deposition of new earth-abundant Kesterite Cu2MgSnS4 nanoparticles by hot-injection method10.1246/cl.140208 ↗
15. Influence of Mg doping on electrical properties of Cu(In,Ga)Se2 bulk materials10.1016/j.jallcom.2013.08.101 ↗
16. Influence of laser repetition rate on the Cu2ZnSn(S,Se)4 thin films synthesized via pulsed laser deposition technique10.1016/j.solmat.2016.05.063 ↗
17. Fabrication of Cu2SnS3 thin film solar cells using pulsed laser deposition technique10.1016/j.solmat.2015.02.031 ↗
18. Effect of post-annealing atmosphere on the grain-size and surface morphological properties of pulsed laser deposited CZTS thin films10.1016/j.ceramint.2014.06.121 ↗
19. Phase segregations and thickness of the Mo(S,Se)2 layer in Cu2ZnSn(S,Se)4 solar cells at different sulfurization temperatures10.1016/j.solmat.2015.07.023 ↗
20. Simplistic toxic to non-toxic hydrothermal route to synthesize Cu2ZnSnS4 nanoparticles for solar cell applications10.1016/j.solener.2015.10.045 ↗
21. Formation mechanism of ZnS impurities and their effect on photoelectrochemical properties on a Cu2ZnSnS4 photocathode10.1039/c3ce42373e ↗
22. Non-vacuum mechanochemical route to the deposition of Cu2SnS3nano-ink for solar cell applications10.1016/j.actamat.2014.11.043 ↗
23. Deposition and characterization of CuxS (x=1-2) nanocrystals formed by the Langmuir-Blodgett technique10.1021/jp507355t ↗
24. Studies on chemical bath deposited SnS2 films for Cd-free thin film solar cells10.1016/j.ceramint.2016.11.219 ↗
25. Investigations on chemo-mechano stabilities of the molybdenum thin films deposited by DC-sputter technique10.1515/zpch-2014-0624 ↗
26. Layer-controlled large area MoS2 layers grown on mica substrate for surface-enhanced Raman scattering10.1016/j.apsusc.2015.10.032 ↗
27. Deposition of simple, low cost and benign sol–gel Cu2ZnSnS4 thin films: influence of different annealing atmospheres
28. Fabrication of 3.01% power conversion efficient high-quality CZTS thin film solar cells by a green and simple sol–gel technique10.1016/j.matlet.2015.05.036 ↗
29. Mg dopant in Cu2ZnSnSe4: an n-type former and a promoter of electrical mobility up to 120 cm2V−1s−110.1016/j.jssc.2014.03.034 ↗