journal article·2020-07

Investigation of room temperature humidity sensing performance of mesoporous CuO particles

Khan Malook, Hamayun Khan, Muhammad Ali, Ihsan-Ul-Haque

Publisher page

Abstract

Abstract Uniform mesoporous particles of CuO were synthesized by thermal decomposition of precursor basic copper carbonate (BCC). The precursor was obtained by co-precipitation method using Cu(NO3)·3H2O and urea as reactant without any additives. Characterization studies including Fourier transform infrared spectrometry (FTIR), X-ray diffraction analysis (XRD), surface area and pore size analyzer and scanning electron microscopy (SEM) was used to investigate the structural, crystallographic, surface area, pore size distribution and morphological properties of basic copper carbonate and CuO. The particles were spherical in shape with uniform sizes. However, the surfaces of basic copper carbonate particles were smooth while CuO particles were of porous appearance. Additional physical characterization revealed that CuO was of mesoporous nature with surface area and average pore diameter 56.25 m2/g and 32–37 nm, respectively. The calcined CuO was fabricated for room temperature humidity detection. The material exhibited reproducible, stable, highly sensitivity and selective response towards humidity with response and recovery time less than 1 s each. The sensing mechanism was proposed to be based on protonic model wherein the generation of protons (charge carriers) reduced the sensor resistance due to their hopping from one active site to another while the capacitance enhanced due to increase in the dielectric constant of the humid sensing layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Fabrication of a semi-transparent flexible humidity sensor using kinetically sprayed cupric oxide film10.1016/j.snb.2018.07.127 ↗
2. Multi-walled carbon nanotubes doped poly(methyl methacrylate) microfiber for relative humidity sensing10.1016/j.sna.2018.01.049 ↗
3. Ultrahigh-performance impedance humidity sensor based on layer-by-layer self-assembled tin disulfide/titanium dioxide nanohybrid film10.1016/j.snb.2018.03.007 ↗
4. Reduced graphene oxide-polyethylene oxide composite flims for humidity sensing via quartz crystal microbalance10.1016/j.snb.2017.09.028 ↗
5. Fabrication, modeling and simulation of high sensitivity capacitive humidity sensors based on ZnO nanorods10.1016/j.snb.2015.10.012 ↗
6. Investigation of humidity sensor based on Au modified ZnO nanosheets via hydrothermal method and first principle10.1016/j.snb.2019.02.089 ↗
7. A novel humidity sensor based on NaTaO3 nanocrystalline10.1016/j.snb.2012.08.050 ↗
8. Humidity sensor using cross-linked poly(chloromethylstyrene)10.1016/S0925-4005(00)00313-0 ↗
9. Capacitive humidity sensing properties of ZnO cauliflowers grown on silicon nanoporous pillar array10.1016/j.snb.2012.11.070 ↗
10. Polymeric humidity sensor using organic/inorganic hybrid polyelectrolytes10.1016/j.snb.2004.12.063 ↗
11. Liquid exfoliation of black phosphorus nanosheets and its application as humidity sensor10.1016/j.micromeso.2016.01.031 ↗
12. Recent developments in 2D layered inorganic nanomaterials for sensing10.1039/C5NR03633J ↗
13. Highly sensitive gold-decorated zinc oxide nanorods sensor for triethylamine working at near room temperature10.1016/j.jcis.2017.03.092 ↗
14. M.A. Kanjwal, W. W.F. Leung, Electrospun Nanofibers of p-Type CuO/n-Type TZB-Gr heterojunctions with enhanced photocatalytic activity, Mater. Chem. Phys. https://doi.org/10.1016/j.matchemphys.2019.01.027https://search.crossref.org/?q=Electrospun+Nanofibers+of+p-Type+CuO%2Fn-Type+TZB-Gr+heterojunctions+with+enhanced+photocatalytic+activity.
15. Preparation and characterization of single-phased n-type CuO film by DC magnetron sputtering10.1016/j.physb.2019.02.037 ↗
16. Synthesis and electrochemical properties of ZnO 3D nanostructures10.1246/cl.2005.1114 ↗
17. Electrolytic molybdenum oxides in lithium batteries10.1007/s10008-004-0565-2 ↗
18. Particle size effects on the electrochemical performance of copper oxides toward lithium10.1149/1.1353566 ↗
19. Gas sensors based on semiconducting metal oxide one-dimensional nanostructures10.3390/s91209903 ↗
20. The synthesis and gas sensitivity of CuO micro-dimensional structures featuring a stepped morphology10.1016/j.matlet.2012.05.024 ↗
21. Large-area aligned CuO nanowires arrays: synthesis, anomalous ferromagnetic and CO gas sensing properties10.1016/j.cap.2012.03.025 ↗
22. Preparation of copper oxide nanowire-based conductometric chemical sensors10.1016/j.snb.2013.02.076 ↗
23. TiO2:WO3 composite humidity sensors doped with ZnO and CuO investigated by impedance spectroscopy10.1016/j.snb.2014.06.117 ↗
24. Ethanol gas and humidity sensors of CuO/Cu2O composite nanowires based on a Cu through-silicon via approach10.1016/j.snb.2015.10.018 ↗
25. Effect of catalysts on the synthesis of CuO nanoparticles: structural and optical properties by sol-gel method, Superlattice
26. Effect of concentration of hexamethylenetetramine in structure, microstructure and optical properties of CuO nanoparticles synthesized by hydrothermal route10.1016/j.mssp.2015.11.023 ↗
27. Green synthesis, morphological and optical studies of CuO nanoparticles10.1016/j.molstruc.2017.09.005 ↗
28. Fabrication of CuO nanoparticles for structural, optical and dielectric analysis using chemical precipitation method10.1007/s10854-017-7083-3 ↗
29. Gas sensing properties of semiconducting copper oxide nanospheroides10.1016/j.powtec.2015.06.023 ↗
30. Highly selective and sensitive response of polypyrrole–MnO2 based composites towards ammonia gas10.1002/pc.24917 ↗
31. Highly selective and sensitive ammonia sensor using polypyrrole/V2O5 composites10.1007/s10854-017-7235-5 ↗
32. Surface modification of basic copper carbonate by mechanochemical processing with sulfur and ammonium sulfate10.1016/j.apt.2017.04.017 ↗
33. Fluoride adsorption on manganese carbonate: ion-exchange based on the surface carbonate-like groups and hydroxyl groups10.1016/j.jcis.2017.09.090 ↗
34. Facile synthesis and improved photocatalytic performance of Ag-AgCl photocatalyst by loading basic zinc carbonate10.1016/j.jallcom.2018.04.163 ↗
35. Flower-shaped CuO nanostructures: structural, photocatalytic and XANES studies10.1016/j.catcom.2008.07.022 ↗
36. Polypyrrole-CuO based composites, promotional effects of CuO contents on polypyrrole characteristics10.1007/s10854-019-00673-x ↗
37. Structural and optical properties of pure and copper doped zinc oxide nanoparticles10.1016/j.rinp.2018.04.010 ↗
38. Surface morphology and gas sensing characteristics of nickel phthalocyanine thin films10.1016/j.snb.2003.11.034 ↗
39. The relationship of particle morphology and structure of basic copper (II) compounds obtained by homogenous precipitation10.1016/0022-0248(94)90068-X ↗
40. Sensitive gas-sensing by creating adsorption active sites: coating an SnO2 layer on triangle arrays10.1021/acsami.8b08078 ↗
41. Nitrogen-doped carbon aerogels with high surface area for supercapacitors and gas adsorption10.1016/j.mtcomm.2018.03.015 ↗
42. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984)
43. Theoretical framework to evaluate minimum desorption temperature for IUPAC classified adsorption isotherms10.1016/j.ijheatmasstransfer.2018.01.107 ↗
44. Recommendations for the characterization of porous solids (technical report)10.1351/pac199466081739 ↗
45. Facile fabrication of high performance QCM humidity sensor based on layer-by-layer self-assembled polyaniline/graphene oxide nanocomposite film10.1016/j.snb.2017.08.212 ↗
46. Enhancing humidity sensing performance of polyaniline/water soluble graphene oxide composite10.1016/j.talanta.2018.12.072 ↗
47. Applied novel sensing material graphene/polypyrrole for humidity sensor10.1016/j.snb.2013.02.017 ↗
48. Humidity sensing characteristics of hydrotungstite thin films10.1007/s12034-008-0133-y ↗
49. Improved gas sensing performance of Al doped ZnO/CuO nanocomposite based ammonia gas sensor10.1016/j.mseb.2017.10.012 ↗
50. CuO nanowire-based humidity sensors prepared on glass substrate10.1016/j.snb.2011.03.004 ↗
51. Capacitive and resistive response of humidity sensors based on graphene decorated by PMMA and silver nanoparticles10.1016/j.snb.2018.03.069 ↗
52. Ultrahigh humidity sensitivity of graphene oxide10.1038/srep02714 ↗
53. Resistive and capacitive response of nitrogen-doped TiO2 nanotubes film humidity sensor
54. Dark conductivity and transient photoconductivity of nanocrystalline undoped and N-doped TiO2 sol–gel thin films10.1016/j.tsf.2007.05.040 ↗
55. Resistive and capacitive response of nitrogen-doped TiO2 nanotubes film humidity sensor
56. Design and development for capacitive humidity sensor applications of lead-free Ca, Mg, Fe, Ti-Oxides-Based electro-ceramics with improved sensing properties via physisorption10.3390/s16071135 ↗
57. Study on dielectric properties of humidity sensing nanometer materials10.1016/j.snb.2004.11.089 ↗
58. Characterization of a hybrid composite of SnO2 nanocrystal-decorated reduced graphene oxide for ppm-level ethanol gas sensing application10.1039/C4RA14611E ↗
59. Chemiresistive humidity sensor based on chitosan/zinc oxide/single-walled carbon nanotube composite film10.1016/j.snb.2018.12.056 ↗
60. TiO2/ZnO heterostructure nanowire based NO2 sensor10.1016/j.mssp.2019.104770 ↗
61. Fabrication of porous silicon filled Pd/SiC nanocauliflower thin films for high performance H2 gas sensor10.1016/j.snb.2018.02.164 ↗