Potassium tartrate as a complexing agent for chemical mechanical polishing of Cu/Co/TaN barrier liner stack in H2O2 based alkaline slurries
Source abstract
Abstract
Abstract The chemical mechanical polishing (CMP) of Cu/Co/TaN barrier liner stack of the sub-14nm devices was associated with several challenges, one of which was to screen out the desired slurries formulation. In this paper, the preliminary screening of cobalt (Co) slurries, combined with the orthogonal test method, was reported systematically for the first time. Based on this, the effects of SiO2, H2O2, potassium tartrate, and TT-LYK on the Co removal rates (RRs) were investigated. The corrosion and polishing behavior of the Co in the slurries containing the above additives were investigated by in-situ OCP measurements, potentiodynamic measurements, and polishing experiments. X-ray photoelectron spectroscopy (XPS) measurements were performed to characterize the complexation mechanism between Co and potassium tartrate. It was found that the slurries containing 5 wt% SiO2, 1 wt% H2O2, and 1.2 wt% PT with 900 ppm TT-LYK at pH 9 was a better candidate for Co barrier planarization and effective in minimizing the galvanic corrosion of Co and Cu under Polishing conditions. Finally, Cu/Co/TaN wafers polished with the candidate slurries showed a good RR selectivity. And the atomic force microscopy (AFM) measurements showed excellent post-polish surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Semiconductor materials and devices · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Direct copper plating on ultra-thin sputtered cobalt film in an alkaline bath10.1149/2.013312jes ↗
2. Mechanism of co liner as enhancement layer for cu interconnect gap-fill10.1149/2.009312jes ↗
3. Synergetic effect of H2O2 and glycine on cobalt CMP in weakly alkaline slurry10.1016/j.mee.2014.02.002 ↗
4. Optimized copper chemical mechanical polishing with CVD co barrier at 14nm technology node
5. CMP process development for cobalt liner at the 28-nm-node
6. Cobalt polishing slurries for 10 nm and beyond
7. Glyoxylic acid as reducing agent for electroless copper deposition on cobalt liner10.1149/06440.0063ecst ↗
8. Effect of chelating agent on reducing galvanic corrosion between cobalt and copper in alkaline slurry
9. Role of additive in alkaline slurries for co CMP
10. Role of 1,2,4-triazole in co/cu removal rate selectivity and galvanic corrosion during barrier CMP
11. Functions of Trilon® P as a polyamine in copper chemical mechanical polishing10.1016/j.apsusc.2013.10.020 ↗
12. Development of the post-chemical mechanical polishing cleaner suppressing galvanic corrosion between copper and the Co barrier metal
13. Potassium oleate as a dissolution and corrosion inhibitor during chemical mechanical planarization of chemical vapor deposited co films for interconnect applications
14. Chemical mechanical polishing of chemical vapor deposited co films with minimal corrosion in the Cu/Co/Mn/SiCOH patterned structures
15. Citric acid as a complexing agent in chemical mechanical polishing slurries for cobalt films for interconnect applications
16. Tanwar · J. Electrochem. Soc. · 2013 · 160 · D324710.1149/2.042312jes ↗
17. Potassium permanganate-based slurry to reduce the galvanic corrosion of the Cu/Ru/TiN barrier liner stack during CMP in the BEOL interconnects
18. Cobalt polishing with reduced galvanic corrosion at copper/cobalt interface using hydrogen peroxide as an oxidizer in colloidal silica-based slurries10.1149/2.073206jes ↗
19. The effect of glycine and benzotriazole on corrosion and polishing properties of cobalt in acid slurry10.1149/2.036209jes ↗
20. The effect of H2O2 and 2-MT on the chemical mechanical polishing of cobalt adhesion layer in acid slurry
21. Role of 1,2,4-triazole as a passivating agent for cobalt during post-chemical mechanical planarization cleaning10.1149/2.093403jes ↗
22. Synergetic effect of H2O2 and glycine on cobalt CMP in weakly alkaline slurry10.1016/j.mee.2014.02.002 ↗
23. An alkaline slurry design for co-cu CMP systems evaluated in the tribo-electrochemical approach
24. Inhibition effect of TT-LYK on cu corrosion and galvanic corrosion between cu and co during CMP in alkaline slurry
25. Study on optimization of CMP slurry for tantalum in ULSI based on Taguchi method10.4028/www.scientific.net/AMR.129-131.794 ↗
26. Optimizing a blend of a mixture slurry in chemical mechanical planarization for advanced semiconductor manufacturing using a posterior preference articulation approach to dual response surface optimization10.1002/asmb.2185 ↗
27. Chemical mechanical planarization of TaN wafers using oxalic and tartaric acid based slurries10.1149/1.3247070 ↗
28. Tartaric acid as a complexing agent for selective removal of tantalum and copper in CMP10.1149/1.2980345 ↗
29. Electroreduction of Cu (II)-tartrate complexes in acid media
30. Complex formation in the copper (ii)-tartaric acid system10.1016/S0003-2670(01)95804-0 ↗
31. New insight in the behaviour of Co–H2O system at 25–150 C, based on revised Pourbaix diagrams10.1016/j.corsci.2007.07.002 ↗
32. John · J. Electrochem. Soc. · 2016 · 163 · F29110.1149/2.1071603jes ↗
33. Electrochemical characterization of surface complexes formed on Cu and Ta in succinic acid based solutions used for chemical mechanical planarization10.1016/j.apsusc.2009.10.108 ↗
34. Electrochemical investigation of the surface-modifying roles of guanidine carbonate in chemical mechanical planarization of tantalum10.1016/j.matchemphys.2011.05.079 ↗
35. Synthesis, characterization of an unusual crystalline material with tartrate10.1002/crat.200800232 ↗
36. Recommended auger parameters for 42 elemental solids10.1016/j.elspec.2011.12.001 ↗
37. X‐ray photoelectron spectroscopic studies of thin film oxides of cobalt and molybdenum10.1002/sia.740150406 ↗
38. Interpretation of the x-ray photoemission spectra of cobalt oxides and cobalt oxide surfaces10.1016/0039-6028(76)90026-1 ↗
39. XPS studies of solvated metal atom dispersed catalysts. Evidence for layered cobalt-manganese particles on alumina and silica10.1021/ja00003a019 ↗
40. Inhibition effect of glycine on molybdenum corrosion during CMP in alkaline H2O2 based abrasive free slurry10.1016/j.apsusc.2017.08.140 ↗
41. Chemical and mechanical aspects of a co-cu planarization scheme based on an alkaline slurry formulation
42. Relative roles of acetic acid, dodecyl sulfate and benzotriazole in chemical mechanical and electrochemical mechanical planarization of copper10.1016/j.apsusc.2007.10.005 ↗