Structural, optical, electrical, and photoelectrochemical properties of cuprous oxide thin films grown by modified SILAR method
Source abstract
Abstract
Abstract In this work, cuprous oxide (Cu2O) thin films have been grown on both soda lime glass (SLG) microscopy slides and Fluorine doped Tin Oxide (FTO) substrates by a modified SILAR method. The pH level of the cationic precursor, adjusted by adding acetic acid and sulfuric acid separately, as well as the concentration of anionic precursor (NaOH) were varied to elucidate their effect on the physical properties of the deposited films. The XRD measurement shows that all films were polycrystalline in nature but single phase Cu2O with (111) preferred orientation. The surface morphology examined by scanning electron microscopy (SEM) revealed that the deposited films are micro-crack and pin hole free and coherently carpet the underlying substrate. The estimated optical band gap and resistivity of the deposited products were found to be in the range of 2.05–2.16 eV and 180–380 Ω.cm respectively where the latter is at least one order of magnitude less than the reported results for Cu2O thin films grown by similar methods. Both the optical band gap and electrical resistivity were found to be decreasing with decreasing the pH level of the cationic precursor solutions and attributed to the improve crystallization of the deposit. The LED ON/OFF modulated transient surface photovoltage of modified SILAR grown Cu2O electrode shows p-type conductivity consistent with hot point probe results and these photocathodes were found to be stable over more than 1 h in a Photoelectrochemical cell filled with aqueous electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. All-oxide photovoltaics10.1021/jz3017039 ↗
2. Formation of all-oxide solar cells in atmospheric condition based on Cu2O thin-films grown through SILAR technique10.1016/j.solmat.2015.11.045 ↗
3. Farhad · 2016 · 222
4. Facile synthesis of oriented zinc oxide seed layer for the subsequent hydrothermal growth of zinc oxide nanorods10.3329/bjsir.v53i4.39186 ↗
5. Determination of the optical band gap for amorphous and nanocrystalline copper oxide thin films prepared by SILAR technique10.1088/0022-3727/42/1/015413 ↗
6. Study of the physical properties of CuO thin films grown by modified SILAR method for solar cells applications
7. Electron microscopy and diffraction studies of pulsed laser deposited cuprous oxide thin films grown at low substrate temperatures10.1016/j.mtla.2018.08.032 ↗
8. Deposition of cupric oxide thin films by spin coating10.1179/1433075X14Y.0000000204 ↗
9. Production of cuprous oxide, a solar cell material, by thermal oxidation and a study of its physical and electrical properties10.1016/S0927-0248(97)00233-X ↗
10. Binary copper oxide semiconductors: from materials towards devices10.1002/pssb.201248128 ↗
11. Effect of post-annealing on the properties of copper oxide thin films obtained from the oxidation of evaporated metallic copper10.1016/j.apsusc.2007.12.019 ↗
12. Fabrication of photoconductive copper oxide thin films by the chemical bath deposition technique10.1143/JJAP.49.081102 ↗
13. Potentiostatic electrodeposition of cuprous oxide thin films for photovoltaic applications10.1016/j.electacta.2011.02.075 ↗
14. Chemical deposition of Cu2O thin films10.1016/0040-6090(85)90041-0 ↗
15. Chemically deposited copper oxide thin films: structural, optical and electrical characteristics10.1016/S0169-4332(99)00239-1 ↗
16. Structural, morphological, optical and photoelectrochemical cell properties of copper oxide using modified SILAR method
17. Physical properties of nanocrystalline CuO thin films prepared by the SILAR method10.1016/j.mssp.2012.09.016 ↗
18. Characterization of chemically deposited cadmium sulfide thin films10.1142/S0217979210055147 ↗
19. Annealing effects on the properties of copper oxide thin films prepared by chemical deposition10.1088/0268-1242/20/5/012 ↗
20. Morphology, bandgap, and grain size tailoring in Cu2O thin film by SILAR method10.1109/TNANO.2014.2369438 ↗
21. Transmittance enhancement and optical band gap widening of Cu2O thin films after air annealing10.1063/1.4865957 ↗
22. Structural and electrical characterizations of electrodeposited p-Type semiconductor Cu2O films10.1149/1.1862478 ↗
23. Synthesis and characterization of high-photoactivity electrodeposited Cu2O solar absorber by photoelectrochemistry and ultrafast spectroscopy10.1021/jp301176y ↗
24. Characterizations of cuprous oxide thin films prepared by sol-gel spin coating technique with different additives for the photoelectrochemical solar cell10.1155/2014/352156 ↗
25. Electrodeposited p-type and n-type ZnSe layers for light emitting devices and multi-layer tandem solar cells