Effect of relative tool sharpness on subsurface damage and material recovery in nanometric cutting of mono-crystalline silicon: A molecular dynamics approach
Source abstract
Abstract
Depth of cut (h 0 ) and tool edge radius (r e) are two key parameters in nanometric cutting, investigating both of the two parameters simultaneously can provide comprehensive understanding of the cutting mechanism. In this paper, relative tool sharpness (RTS), which is quantified as h 0/r e , is employed as a factor to examine the subsurface damage and material recovery in nanometric cutting of mono-crystalline silicon using molecular dynamics (MD) simulation. Various RTS values were generated by changes of cutting depth at different tool edge radius of 1, 3 and 5 nm respectively. Results indicate that there is always a layer of particles which sticks on the tool surface and influences the machined surface, even at RTS = 0. Besides that, the increase of RTS results in subsurface damage layer serration, which is caused by stick-slip phenomenon between the tool and workpiece. A bigger RTS causes a bigger depth of serrations, although the number of serrations remains constant. Increase in RTS also causes the formation of the hexagonal diamond structure. The material recovery drops dramatically by RTS increase. Using a sharper tool edge (RTS<0.25) at a cutting depths below 1 nm does not necessarily decrease subsurface damage due to the drastic stress concentration. It is also demonstrated that silicon amorphisation can occur in the unmachined region in front of the tool due to the hydrostatic pressure wave caused by tool advancement.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. On the ductile machining of silicon for micro electro-mechanical systems (MEMS), opto-electronic and optical applications10.1016/S0921-5093(00)01031-5 ↗
2. Microstructure and nanomechanical properties of Fe+ implanted silicon10.1016/j.apsusc.2013.07.129 ↗
3. Ultraprecision surface flattening of porous silicon by diamond turning10.1016/j.precisioneng.2017.02.015 ↗
4. Ductile regime turning at large tool feed10.1016/S0924-0136(01)01218-3 ↗
5. Effects of tool edge radius on ductile machining of silicon: an investigation by FEM10.1088/0268-1242/24/7/075018 ↗
6. Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining10.1016/j.precisioneng.2008.10.008 ↗
7. Influence of material swelling on surface roughness in diamond turning of single crystals10.1179/026708301101509025 ↗
8. Some observations on the wear of diamond tools in ultra-precision cutting of single-crystal silicon10.1016/S0043-1648(03)00076-0 ↗
9. Study on cutting mechanism of monocrystalline silicon using molecular dynamics on nanometric scale
10. Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process10.1016/j.triboint.2012.06.027 ↗
11. Transmission electron microscopic observation of nanoindentations made on ductile-machined silicon wafers10.1063/1.2133908 ↗
12. Effects of recovery and side flow on surface generation in nano-cutting of single crystal silicon10.1016/j.commatsci.2017.11.002 ↗
13. To · 2018
14. A study of materials swelling and recovery in single-point diamond turning of ductile materials10.1016/j.jmatprotec.2006.06.006 ↗
15. Molecular dynamics simulation investigation on the plastic flow behaviour of silicon during nanometric cutting10.1088/0965-0393/24/1/015002 ↗
16. Reduction of material swelling and recovery of titanium alloys in diamond cutting by magnetic field assistance10.1016/j.jallcom.2017.06.167 ↗
17. Conservation law of surface roughness in single point diamond turning10.1016/j.ijmachtools.2014.04.006 ↗
18. Effect of material microstructure and tool geometry on surface generation in single point diamond turning10.1016/j.precisioneng.2014.01.002 ↗
19. The effect of the cutting edge radius on a machined surface in the nanoscale ductile mode cutting of silicon wafer10.1243/09544054JEM568 ↗
20. Molecular dynamics simulation of subsurface deformed layers in AFM-based nanometric cutting process10.1016/j.apsusc.2008.01.096 ↗
21. Nanometric cutting of silicon with an amorphous-crystalline layered structure: a molecular dynamics study10.1186/s11671-017-1829-y ↗
22. Research on the effects of machining-induced subsurface damages on mono-crystalline silicon via molecular dynamics simulation10.1016/j.apsusc.2012.06.087 ↗
23. Molecular dynamics simulation on subsurface damage layer during nano grinding process of silicon wafer
24. The effect of tool geometry on subsurface damage and material removal in nanometric cutting single-crystal silicon by a molecular dynamics simulation10.1007/s00339-016-0319-x ↗
25. A numerical study of ultraprecision machining of monocrystalline silicon with laser nano-structured diamond tools by atomistic simulation10.1016/j.apsusc.2016.10.014 ↗
26. Molecular dynamics simulation of subsurface damage mechanism during nanoscratching of single crystal silicon10.1177/1350650118765351 ↗
27. Molecular dynamics simulation of silicon carbide nanoscale material removal behavior10.1016/j.ceramint.2018.03.195 ↗
28. Variation of surface generation mechanisms in ultra-precision machining due to relative tool sharpness (RTS) and material properties10.1016/j.ijmachtools.2016.11.003 ↗
29. Influence of relative tool sharpness (RTS) on different ultra-precision machining regimes of Mg alloy10.1007/s00170-018-1599-4 ↗
30. Molecular dynamics investigation of nanometric cutting of single-crystal silicon using a blunt tool10.1007/s11837-019-03671-w ↗
31. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
32. Investigation on the effect of workpiece dimension in nanometric machining of monocrystalline silicon by molecular dynamics simulation
33. Influence of temperature on the anisotropic cutting behaviour of single crystal silicon: a molecular dynamics simulation investigation10.1016/j.jmapro.2016.06.009 ↗
34. Study of AFM-based nanometric cutting process using molecular dynamics10.1016/j.apsusc.2010.05.044 ↗
35. Subsurface damage mechanism of high speed grinding process in single crystal silicon revealed by atomistic simulations10.1016/j.apsusc.2014.10.149 ↗
36. A molecular dynamics investigation into nanoscale scratching mechanism of polycrystalline silicon carbide10.1016/j.commatsci.2018.02.038 ↗
37. The effect of rough surface on nanoscale high speed grinding by a molecular dynamics simulation10.1016/j.commatsci.2014.10.069 ↗
38. A numerical study on the material removal and phase transformation in the nanometric cutting of silicon10.1016/j.apsusc.2018.05.091 ↗
39. Empirical interatomic potential for silicon with improved elastic properties10.1103/PhysRevB.38.9902 ↗
40. New empirical approach for the structure and energy of covalent systems10.1103/PhysRevB.37.6991 ↗
41. Modeling solid-state chemistry: interatomic potentials for multicomponent systems10.1103/PhysRevB.39.5566 ↗
42. Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
43. Chip formation dependence of machining velocities in nano-scale by molecular dynamics simulations10.1007/s11431-014-5708-9 ↗
44. Influence of laser nanostructured diamond tools on the cutting behavior of silicon by molecular dynamics simulation10.1039/C6RA27070K ↗
45. Replacing diamond cutting tools with CBN for efficient nanometric cutting of silicon10.1016/j.matlet.2011.11.028 ↗
46. Molecular dynamics study of melting and freezing of small Lennard-Jones clusters10.1021/j100303a014 ↗
47. Investigation of ultra-precision machining using molecular dynamics simulation and experiments on single crystal silicon
48. Phase transformations of silicon caused by contact loading10.1063/1.364340 ↗
49. Friction at the tool–chip interface during orthogonal nanometric machining10.1088/0965-0393/20/5/055007 ↗
50. A numeric investigation of friction behaviors along tool/chip interface in nanometric machining of a single crystal copper structure10.1007/s00170-013-4734-2 ↗
51. Controllable anisotropic dry adhesion in vacuum: gecko inspired wedged surface fabricated with ultraprecision diamond cutting10.1002/adfm.201606576 ↗
52. Influence of cutting speed on subsurface damage morphology and distribution in ground fused silica10.3390/inventions2030015 ↗
53. Sliding friction10.1016/S0167-5729(98)00009-0 ↗
54. Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo10.1016/j.ijmachtools.2016.11.004 ↗
55. On the cracks self-healing mechanism at ductile mode cutting of silicon10.1016/j.triboint.2014.07.003 ↗
56. An experimental study of edge radius effect on cutting single crystal silicon10.1007/s00170-003-1593-2 ↗
57. Influence of crystal anisotropy on subsurface damage in ultra-precision cylindrical turning of CaF210.1016/j.precisioneng.2017.01.017 ↗
58. Diamond machining of silicon: a review of advances in molecular dynamics simulation10.1016/j.ijmachtools.2014.09.013 ↗
59. A review of surface roughness generation in ultra-precision machining10.1016/j.ijmachtools.2015.02.001 ↗
60. The effect of interatomic potential function on nanometric machining of single crystal silicon