journal article·2018-10

Influence of small size pyramid texturing on contact shading loss and performance analysis of Ag-screen printed mono crystalline silicon solar cells

Minkyu Ju, Kumar Mallem, Subhajit Dutta, Nagarajan Balaji, Donghyun Oh, Eun-Chel Cho, Young Hyun Cho, Youngkuk Kim, Junsin Yi

Publisher page

Abstract

Abstract Front side textured random pyramids are widely utilized in major industries for the performance enhancement of crystalline silicon (c-Si) solar cells. Random pyramids not only reduce the surface reflectance but also improve the light trapping effect. Therefore, it is necessary to understand the pyramid height affecting the cell performance, further improving cell efficiency. In this work, we present an experimental study to investigate the influence of pyramids size on the contact shading loss mechanism of silver (Ag) screen-printed p-type c-Si solar cells. Three alkaline texture solutions with sodium silicate additives were optimized to develop the small pyramid (0.5–2.0 µm) size, middle pyramid (5.0–9.0 µm) size and large pyramid (10–15 µm) size on the c-Si surface, respectively. It was noticed that screen-printed finger width strongly depends on pyramid size. Even though, same mesh patterns and screen printing conditions resulted in 20 µm widening of metal finger width on the large pyramids as compared to the small pyramids. This was attributed to the increase in the size of cell surface pyramids that not only varied the gap between the screen mesh and cell surface while screen-printing but also hindered the contraction of metal electrodes during the firing process. The c-Si solar cells with large pyramids suffered from an extra shading loss during fabrication, thus, led to the reduction of the short circuit current density (~0.7 mA/cm2) resulting in lower efficiency (~17.72%) as compared to efficiency (~18.60%) of small pyramid based cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. P-type versus n-type silicon wafers: prospects for high-efficiency commercial silicon solar cells10.1109/TED.2006.878026 ↗
2. Optimum design for bifacial silicon solar cells10.1016/S0960-1481(00)00025-2 ↗
3. Recombination activity of interstitial iron and other transition metal point defects in p-and n-type crystalline silicon10.1063/1.1812833 ↗
4. Influence of random pyramid surface texture on silver screen-printed contact formation for monocrystalline silicon wafer solar cells10.1016/j.solmat.2014.10.018 ↗
5. The effect of front pyramid heights on the efficiency of homogeneously textured inline-diffused screen-printed monocrystalline silicon wafer solar cells10.1016/j.renene.2015.01.058 ↗
6. Theoretical study of pyramid sizes and scattering effects in silicon photovoltaic module stacks10.1364/OE.26.00A320 ↗
7. On black solar cells or the tetrahedral texturing of a silicon surface10.1109/T-ED.1976.18576 ↗
8. The surface texturization of solar cells: a new method using V-grooves with controllable sidewall angles10.1016/0927-0248(92)90126-A ↗
9. Liquid silicate additive for alkaline texturing of mono-Si wafers to improve process bath lifetime and reduce IPA consumption10.1016/j.solmat.2013.01.037 ↗
10. Texturization of monocrystalline silicon with tribasic sodium phosphate10.1016/S0927-0248(02)00347-1 ↗
11. Influence of texture feature size on the optical performance of silicon solar cells10.1002/pip.571 ↗
12. Formation of various pyramidal structures on monocrystalline silicon surface and their influence on the solar cells10.1155/2013/716012 ↗
13. D.L. King, M.E. Buck, Experimental optimization of an anisotropic etching process for random texturization of silicon solar cells, in: Photovoltaic Specialists Conference, 1991, Conference Record of the Twenty Second IEEE, IEEE, 1991, pp. 303–308.10.1109/PVSC.1991.169228 ↗
14. Large-area nanosphere self-assembly by a micro-propulsive injection method for high throughput periodic surface nanotexturing10.1021/acs.nanolett.5b01202 ↗
15. Insights into nucleation engineering in Si pyramidal texturing for high performance heterojunction solar cells applications
16. Pyramidal texturing of silicon surface via inorganic–organic hybrid alkaline liquor for heterojunction solar cells10.1016/j.jpowsour.2015.05.124 ↗
17. Silicon solar cells with bifacial metal oxides carrier selective layers10.1016/j.nanoen.2017.07.014 ↗
18. Improved anisotropic etching process for industrial texturing of silicon solar cells10.1016/S0927-0248(98)00180-9 ↗
19. Influence of surface topography on the glass coverage in the contact formation of silver screen-printed Si solar cells10.1109/JPHOTOV.2012.2209406 ↗
20. J. Ximello Quiebras, A. Dastgheib-Shirazi, S. Scholz, G. Hahn, Influence of pyramid size of chemically textured silicon wafers on the characteristics of industrial solar cells, in: Proceedings of the 25th European Photovoltaic Solar Energy Confere and Exhibition. 5th World Conference on Photovoltaic Energy Conversion, 2010, pp. 1761–1764.
21. Realization of quasi‐Omnidirectional solar cells with superior electrical performance by all‐solution‐processed Si nanopyramids10.1002/advs.201700200 ↗
22. Heterojunction hybrid solar cells by formation of conformal contacts between PEDOT: PSS and periodic silicon nanopyramid arrays10.1002/smll.201704493 ↗
23. Effectiveness of anisotropic etching of silicon in aqueous alkaline solutions10.1016/S0927-0248(00)00414-1 ↗
24. Optimization of fabrication process of high-efficiency and low-cost crystalline silicon solar cell for industrial applications10.1016/j.solmat.2008.10.013 ↗
25. Novel low-temperature-sintering type Cu-alloy pastes for silicon solar cells10.1016/j.egypro.2012.05.009 ↗
26. Advanced passivation technology and loss factor minimization for high efficiency solar cells10.1166/jnn.2015.11206 ↗
27. Advanced screen printing technique for high definition front side metallization of crystalline silicon solar cells10.1016/j.solmat.2009.05.018 ↗
28. Double screen printed metallization of crystalline silicon solar cells as low as 30 μm metal line width for mass production10.1016/j.solmat.2012.01.018 ↗
29. Regulated low cost pre-treatment step for surface texturization of large area industrial single crystalline silicon solar cell10.1016/j.solmat.2010.02.025 ↗
30. The effect of small pyramid texturing on the enhanced passivation and efficiency of single c-Si solar cells10.1039/C6RA05321A ↗
31. Electrical properties of screen printed silicon solar cell dependent upon thermophysical behavior of glass frits in Ag pastes10.1143/JJAP.48.05EC06 ↗