journal article·2016-02

Pilot plant scale continuous hydrothermal synthesis of nano-titania; effect of size on photocatalytic activity

Neel M. Makwana, Christopher J. Tighe, Robert I. Gruar, Paul F. McMillan, Jawwad A. Darr

Publisher page

Abstract

Abstract A pilot plant scale continuous hydrothermal flow synthesis (CHFS) process was used to control the crystallite size (and surface area) for nano-TiO2 in the range ca. 5–18 nm. In CHFS, a room temperature solution of titanium oxysulfate (and boric acid) was mixed in flow with a feed of potassium hydroxide solution (at 24.1 MPa), and then this combined stream was mixed with a flow of superheated water (at 400 °C and 24.1 MPa) in a confined jet mixer. Nano-TiO2 particles were formed instantly and then cooled inline before being collected as a slurry from the exit of the process. It was observed that the boric acid concentration in the precursor feed affected reaction pH, which in turn, determined the average crystallite size of the nano-TiO2; as the pH increased, larger crystallites were obtained. The nanomaterials were evaluated in a sacrificial photocatalytic water splitting system (hydrogen evolution), and it was found that TiO2 prepared under mildly acidic conditions, yielded the highest photoactivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced oxidation water treatment

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Water purification by semiconductor photocatalysis10.1039/cs9932200417 ↗
2. Characterisation of the photocatalyst Pilkington Activ™: a reference film photocatalyst?10.1016/S1010-6030(03)00205-3 ↗
3. Visible light induced photocatalytic degradation of organic pollutants10.1016/j.jphotochemrev.2005.09.001 ↗
4. A review and recent developments in photocatalytic water-splitting using TiO2 for hydrogen production10.1016/j.rser.2005.01.009 ↗
5. Visible-light photocatalysis in nitrogen-doped titanium oxides10.1126/science.1061051 ↗
6. Nitrogen-doped TiO2 thin films: photocatalytic applications for healthcare environments10.1039/C0DT00494D ↗
7. The influence of preparation method, nitrogen source, and post-treatment on the photocatalytic activity and stability of N-doped TiO2 nanopowder10.1016/j.jhazmat.2011.09.021 ↗
8. Nitrogen-doped titanium dioxide active in photocatalytic reactions with visible light: a multi-technique characterization of differently prepared materials10.1021/jp803806s ↗
9. White light induced photocatalytic activity of sulfur-doped TiO2 thin films and their potential for antibacterial application10.1039/b913793a ↗
10. Sulfur- and nitrogen-doped titania biomaterials via APCVD10.1002/cvde.200906836 ↗
11. Band gap narrowing of titanium dioxide by sulfur doping10.1063/1.1493647 ↗
12. Characterization and photocatalytic activity of boron-doped TiO2 thin films prepared by liquid phase deposition technique10.1007/s12034-008-0117-y ↗
13. Atmospheric pressure chemical vapour deposition of boron doped titanium dioxide for photocatalytic water reduction and oxidation10.1039/c3cp52665h ↗
14. Boron-doped TiO2: characteristics and photoactivity under visible light10.1016/j.proche.2009.11.003 ↗
15. Characterization of boron-doped TiO2 nanotube arrays prepared by electrochemical method and its visible light activity10.1016/j.seppur.2008.03.021 ↗
16. Preparation of boron-doped TiO2 films by autoclaved-sol method at low temperature and study on their photocatalytic activity10.1016/j.tsf.2010.07.071 ↗
17. Particle size, shape and activity for photocatalysis on titania anatase nanoparticles in aqueous surroundings10.1021/ja206153v ↗
18. High-throughput powder diffraction on beamline I11 at Diamond10.1107/S0021889810044948 ↗
19. High-throughput continuous hydrothermal synthesis of nanomaterials (Part II): unveiling the as-prepared CexZryYzO2−δ phase diagram10.1021/co3001346 ↗
20. High-throughput continuous hydrothermal synthesis of an entire nanoceramic phase diagram10.1021/cc900041a ↗
21. Structure–property–composition relationships in doped zinc oxides: enhanced photocatalytic activity with rare Earth dopants10.1021/co500109f ↗
22. Synthesis and characterization of doped nano-sized ceria–zirconia solid solutions10.1016/j.apcatb.2009.03.031 ↗
23. Scaling-up a confined jet reactor for the continuous hydrothermal manufacture of nanomaterials10.1021/ie302567d ↗
24. Scale up production of nanoparticles: continuous supercritical water synthesis of Ce–Zn oxides10.1021/ie3025642 ↗
25. Screening tests for the evaluation of nanoparticle titania photocatalysts10.1002/jctb.2237 ↗
26. Direct continuous hydrothermal synthesis of high surface area nanosized titania10.1016/j.jallcom.2008.09.036 ↗
27. Photocatalytic activities of N-doped nano-titanias and titanium nitride10.1016/j.jeurceramsoc.2009.02.008 ↗
28. Continuous supercritical hydrothermal synthesis of controlled size and highly crystalline anatase TiO2 nanoparticles10.1016/j.supflu.2009.06.009 ↗
29. Crystallization of anatase nanoparticles from amorphous precipitate by a continuous hydrothermal process10.1016/j.cej.2011.08.065 ↗
30. Highly controlled crystallite size and crystallinity of pure and iron-doped anatase-TiO2 nanocrystals by continuous flow supercritical synthesis10.1557/jmr.2012.234 ↗
31. Photocatalytic evolution of hydrogen and oxygen from ceramic wafers of commercial titanias10.1016/j.jphotochem.2010.07.033 ↗
32. Photocatalytic water disinfection by simple and low-cost monolithic and heterojunction ceramic wafers10.1039/C5PP00002E ↗
33. A simple and low-cost method for the preparation of self-supported TiO2–WO3 ceramic heterojunction wafers10.1039/C4TA03257H ↗
34. A non-end-loaded piston-cylinder device for use up to 40kbar
35. Effect of pH on synthesis of single phase titania (TiO2) nanoparticles and its characterization10.1080/02726351.2014.951458 ↗
36. Effect of pH on TiO2 nanoparticles via sol gel method
37. Synthesis of TiO2 nanoparticles by hydrolysis and peptization of titanium isopropoxide solution10.1016/j.jmatprotec.2007.01.040 ↗
38. Effect of TiOSO4 hydrothermal hydrolysis conditions on TiO2 morphology and gas-phase oxidative activity10.1163/156856707779238702 ↗
39. The titanyl question revisited10.1021/ic00255a024 ↗
40. Boric Acid equilibria in near-critical and supercritical water10.1021/ie9707634 ↗
41. Size and phonon-confinement effects on low-frequency Raman mode of anatase TiO2 nanocrystal10.1016/j.physleta.2005.04.008 ↗
42. Influence of particle size on the phonon confinement of TiO2 nanoparticles10.1080/17458080.2012.689018 ↗
43. Low-temperature preparation of boron-doped titania by hydrothermal method and its photocatalytic activity10.1016/j.jallcom.2009.04.156 ↗
44. Boron oxide production kinetics using boric acid as raw material10.1021/ie300685x ↗
45. Optical and photocatalytic behaviours of nanoparticles in the Ti–Zn–O binary system10.1039/C3RA48030E ↗