journal article·2018-06

Enhanced uniformity in electrical and optical properties of ITO thin films using a wide thermal annealing system

Sejong Seong, Yong Chan Jung, Taehoon Lee, In-Sung Park, Jinho Ahn

Publisher page

Abstract

Abstract We investigated the effects of thermal treatment using a wide thermal annealing (w-TA) system on the structural, electrical, and optical properties of indium tin oxide (ITO) thin films deposited by radio-frequency magnetron sputtering at room temperature. The w-TA system was designed to enhance the uniformities of the electrical and optical properties of thin films in a large-scale 8G display substrate. The ITO films were annealed at 350 °C and 450 °C in a planar w-TA chamber. The X-ray diffraction analysis showed crystallization of ITO films along the 〈111〉 direction after the annealing process and an increase in their crystallite size with process temperature. The uniform characteristics of the electrical resistance and optical transmittance of ITO films are suitable for wide transparent electrodes, being the major advantage of the w-TA system. The sheet resistance (Rs) of the ITO thin films was lower, down to 18 Ω/□, and the variation of the Rs value was also narrowed down, which is measured by Rs at diverse points, after the w-TA process. The carrier concentration and mobility of the ITO films improved with an increase in annealing temperatures. The annealed ITO films exhibited both improved transmittance and better uniformity in the visible light region on a large 8G substrate. The band gap energy and carrier concentration of the ITO films increased after thermal annealing, as suggested by both the blue shift of the refractive index and the extinction coefficient values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Effects of processing parameters on crystalline structure and optoelectronic behavior
2. Effect of growth temperature and coating cycles on structural, electrical, optical properties and stability of ITO films deposited by magnetron sputtering10.1016/j.mssp.2014.01.007 ↗
3. Substitution mechanism of Ga for Zn site depending on deposition temperature for transparent conducting oxides10.1016/j.cap.2012.05.009 ↗
4. Tin-doped indium oxide films for highly flexible transparent conducting electrodes10.1016/j.tsf.2016.06.040 ↗
5. Improvement of electrical properties of printed ITO thin films by heat-treatment conditions10.1016/j.cap.2010.11.081 ↗
6. High-performance ultraviolet-blue light-emitting diodes based on an n-ZnO nanowall networks/p-GaN heterojunction10.1063/1.4813538 ↗
7. Semi-transparent all-oxide ultraviolet light-emitting diodes based on ZnO/NiO-core/shell nanowires10.1039/C5NR07236K ↗
8. Influence of thermal annealing on electrical and optical properties of indium tin oxide thin films10.1016/j.mssp.2014.05.026 ↗
9. Improved output power and low forward voltage for GaN-based light emitting diodes with an annealed ITO transparent conducting layer
10. Improved electrical and optical properties of ITO thin films by using electron beam irradiation and their application to UV-LED as highly transparent p-type electrodes10.1016/j.cap.2011.03.082 ↗
11. Effect of rapid thermal annealing on the properties of spin-coated In–Zn–Sn–O films10.1016/j.cap.2012.12.015 ↗
12. Oxygen–deficient indium tin oxide thin films annealed by atmospheric pressure plasma jets with/without air-quenching10.1016/j.apsusc.2013.11.118 ↗
13. Rapid thermal annealing of ITO films10.1016/j.apsusc.2011.03.009 ↗
14. In situ monitoring of excimer laser annealing of tin-depoed indium oxide films for the development of a low-temperature fabrication process10.1016/j.apsusc.2013.12.101 ↗
15. Quantitative detection of thermal barrier coating thickness based on simulated annealing algorithm using pulsed infrared thermography technology10.1016/j.applthermaleng.2016.01.143 ↗
16. Advanced photo-annealing of indium zinc oxide films for thin-film transistor using pulse UV light10.1080/15980316.2016.1149114 ↗
17. Uniform dehydrogenation of amorphous silicon thin films using a wide thermal annealing system10.1088/1361-6641/32/2/025007 ↗
18. Effect of rapid thermal annealing on the properties of spin-coated In–Zn–Sn–O films10.1016/j.cap.2012.12.015 ↗
19. Role of annealing temperature on microstructural and electro-optical properties of ITO films produced by sputtering
20. Effect of annealing time on the structural, optical and electrical characteristics of DC sputtered ITO thin films
21. Influence of annealing temperature on structural and optical properties of undoped and Al-doped nano-ZnO films prepared by sol–gel method10.1166/sam.2016.2548 ↗
22. Effect of annealing on the structural, optical and electrical properties of ITO films by RF sputtering under low vacuum level10.1016/j.mejo.2008.06.081 ↗
23. Improvement of optical and electrical properties of ITO thin films by electro-annealing10.1016/j.vacuum.2015.06.027 ↗
24. Correlation between crystallinity and oxygen vacancy formation in In–Ga–Zn oxide10.7567/JJAP.55.021203 ↗
25. Optical properties and electronic structure of amorphous Ge and Si10.1016/0025-5408(68)90023-8 ↗
26. Density and refractive index of TiO2 films prepared by reactive evaporation10.1016/S0040-6090(00)01015-4 ↗