journal article·2017-06

Surface integrity and removal mechanism of silicon wafers in chemo-mechanical grinding using a newly developed soft abrasive grinding wheel

Shang Gao, Han Huang, Xianglong Zhu, Renke Kang

Publisher page

Abstract

A new soft abrasive grinding wheel (SAGW) used in chemo-mechanical grinding (CMG) was developed for machining silicon wafers. The wheel consisted of magnesia (MgO) soft abrasives, calcium carbonate (CaCO) additives and magnesium oxychloride bond. Surface topography, roughness and subsurface damage of the silicon wafers ground using the new SAGW were comprehensively investigated. The results showed that the grinding with the new SAGW produced a surface roughness of about 0.5 nm in R and a subsurface damage layer of about 10 nm in thickness, which is comparable to that produced by chemo-mechanical polishing. This study also revealed that the chemical reactions between MgO abrasive, CaCO additives and silicon material did occur during grinding, thereby generating a soft reactant layer on the ground surface. The reactant layer was easily removed during the grinding process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Abrasive machining of silicon10.1016/S0007-8506(07)62999-0 ↗
2. Edge chipping of silicon wafers in diamond grinding10.1016/j.ijmachtools.2012.08.002 ↗
3. Ductile-regime grinding – a new technology for machining brittle materials10.1115/1.2899676 ↗
4. Novel method to investigate the critical depth of cut of ground silicon wafer10.1016/j.jmatprotec.2006.07.025 ↗
5. Fundamental investigation of subsurface damage in single crystalline silicon caused by diamond machining10.1016/j.precisioneng.2008.10.008 ↗
6. Grinding of silicon wafers using an ultrafine diamond wheel of a hybrid bond material10.1016/j.ijmachtools.2010.10.006 ↗
7. Diamond machining of silicon: a review of advances in molecular dynamics simulation10.1016/j.ijmachtools.2014.09.013 ↗
8. Effect of ultraprecision grinding on microstructural change in silicon monocrystals10.1016/S0924-0136(98)00090-9 ↗
9. Characteristics of silicon substrates fabricated using nanogrinding and chemo-mechanical-grinding10.1016/j.msea.2007.06.061 ↗
10. Phase transformation of single crystal silicon induced by grinding with ultrafine diamond grits10.1016/j.scriptamat.2010.09.038 ↗
11. Changes in surface layer of silicon wafers from diamond scratching10.1016/j.cirp.2015.04.005 ↗
12. Advanced wafer thinning technology and feasibility test for 3D integration10.1016/j.mee.2012.10.025 ↗
13. Grinding of silicon wafers: a review from historical perspectives10.1016/j.ijmachtools.2008.05.009 ↗
14. Observations on polishing and ultraprecision machining of semiconductor substrate materials10.1016/S0007-8506(07)60508-3 ↗
15. Li · 2008
16. Steigerwald · 2008
17. A novel fixed abrasive process: chemo-mechanical grinding technology10.1504/IJMTM.2005.007696 ↗
18. Defect-free fabrication for single crystal silicon substrate by chemo-mechanical grinding10.1016/S0007-8506(07)60424-7 ↗
19. Study on grinding performance of soft abrasive wheel for silicon wafer10.4028/www.scientific.net/KEM.416.529 ↗
20. Elimination of surface scratch/texture on the surface of single crystal Si substrate in chemo-mechanical grinding (CMG) process10.1016/j.apsusc.2008.11.009 ↗
21. S. Gao, Z. Dong, R. Kang, D. Guo, Design and evaluation of soft abrasive grinding wheels for silicon wafers, Proceedings Inst. Mech. Eng. B: J. Eng. Manuf. 227, 2013, pp. 578–586.10.1177/0954405413476391 ↗
22. Influence of curing temperature on the evolution of magnesium oxychloride cement10.1007/s10853-011-5628-z ↗
23. Influence of molar ratios on properties of magnesium oxychloride cement10.1016/j.cemconres.2007.03.015 ↗
24. Chemical effect on the material removal rate in the CMP of silicon wafers10.1016/j.wear.2010.11.006 ↗
25. Optimization of design of experiment for chemical mechanical polishing of a 12-in. wafer10.1016/j.mee.2013.05.010 ↗
26. Polishing behavior of PS/CeO2 hybrid microspheres with controlled shell thickness on silicon dioxide CMP10.1016/j.apsusc.2011.05.047 ↗
27. Mechano-chemical polishing of silicon wafers10.1016/S0924-0136(03)00827-6 ↗
28. Herrmann · 2011
29. Comparison of friction and wear performances of brake materials containing different amounts of ZrSiO4 dry sliding against SiCp reinforced Al matrix composites10.1016/j.msea.2006.09.054 ↗
30. S. Ramanath, S.T. Buljan, J.R. Wilson, J.A.S. Ikeda, Porous abrasive tool and method for making the same, US Patent 20030232586, 2003.
31. Grinding wheels for manufacturing of silicon wafers: a literature review10.1016/j.ijmachtools.2006.02.003 ↗
32. XPS analysis of the groove wearing marks on flank face of diamond tool in nanometric cutting of silicon wafer10.1016/j.ijmachtools.2008.06.008 ↗
33. The formation of hydrogen passivated silicon single‐crystal surfaces using ultraviolet cleaning and HF etching10.1063/1.341489 ↗
34. XPS studies of structure-induced radiation effects at the Si/SiO2 interface10.1109/TNS.1980.4331082 ↗
35. Ultrathin SiO2 on Si: iii mapping the layer thickness efficiently by XPS10.1002/sia.1478 ↗
36. Chemical state of chromium in CaO-SiO2 base oxides annealed under different conditions10.2355/isijinternational.48.1404 ↗
37. Growth and structural properties of Mg: C thin films prepared by magnetron sputtering10.1016/j.tsf.2009.12.082 ↗
38. Moulder · 1992
39. Magnesium salts and oxide: an XPS overview10.1016/S0169-4332(97)00180-3 ↗
40. The adsorption of oxygen and water on Ca and CaO films studied with MIES, UPS and XPS10.1016/j.susc.2008.02.011 ↗
41. Crystal structures and chemical bonding of magnesium carbide at high pressure10.1021/acs.jpcc.5b07862 ↗
42. Nano CaO grain characteristics and growth model under calcination10.1016/j.cej.2011.09.084 ↗
43. Equilibria in the silicothermic reduction of calcined dolomite10.1007/BF02664228 ↗
44. Laser-induced magnesium production from magnesium oxide using reducing agents10.1063/1.2975969 ↗