journal article·2020-06

Analytical prediction of subsurface microcrack damage depth in diamond wire sawing silicon crystal

Liyuan Wang, Yufei Gao, Xinying Li, Tianzhao Pu, Youkang Yin

Publisher page

Abstract

Abstract Subsurface microcrack damage depth (SSD) in silicon wafer processed by diamond wire sawing has a great influence on the subsequent processing process and fracture strength of silicon wafer. Based on the indentation fracture mechanics, a new numerical model for predicting the SSD of silicon wafer on the basis of half-penny crack system is proposed in this paper. In this model, effect of the random distribution characteristics of size, position and tip half angle of abrasives and different material removal modes to the contour of workpiece cutting groove are all considered. Median cracks and radial cracks are regarded that propagating into one body, that is half-penny crack system. Validity of this model is verified by comparing with experimental results in the literature. From this model, the relationship between SSD and feed rate, wire speed, size of abrasives and density of abrasives on the surface of saw wire is analyzed, the critical speed ratio of feed rate to wire speed that can achieve pure ductile processing is discussed as well. The results show that using the maximum extended length of half-penny crack system as the SSD of silicon wafer is more reasonable than using the maximum extended length of median cracks as the SSD of silicon wafer. As wire speed increases, feed rate decreases, or density of abrasives on the surface of saw wire increases, the SSD will decrease. Keeping other parameters of saw wire unchanged, the size of abrasives has no significant effect on the change of SSD. Keeping the ratio of feed rate to wire speed unchanged, the SSD varies within a small range. When the speed ratio is in the range of 10.43–16, the slice surface tends to be formed by pure ductile removal of material. The results can be used to guide the optimization of diamond wire sawing process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Effect of growth rate and wafering on residual stress of diamond wire sawn silicon wafers
2. Fracture strength of silicon wafers sawn by fixed diamond wire saw10.1016/j.solener.2017.08.063 ↗
3. Effect of crystal defects on mechanical properties relevant to cutting of multicrystalline solar silicon10.1016/j.mssp.2013.05.016 ↗
4. Research of the cutting marks on diamond wire cut multicrystalline silicon wafers and the method to remove them
5. Diamond wire sawing of solar silicon wafers: a sustainable manufacturing alternative to loose abrasive slurry sawing
6. Fixed abrasive diamond wire saw slicing of single-crystal silicon carbide wafers10.1081/AMP-120029960 ↗
7. Basic mechanisms and models of multi-wire sawing10.1002/adem.200400578 ↗
8. Experiment study on electroplated diamond wire saw slicing single-crystal silicon10.1016/j.mssp.2016.08.003 ↗
9. Roughness damage evolution due to wire saw process10.1007/s12541-011-0126-4 ↗
10. Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon10.1016/j.precisioneng.2017.04.011 ↗
11. Textural development of SiC and diamond wire sawed sc-silicon wafer10.1016/j.egypro.2012.07.072 ↗
12. Microstructure studies of the grinding damage in monocrystalline silicon wafers10.1016/S1001-0521(07)60020-5 ↗
13. The impact of subsurface damage on the fracture strength of diamond-wire-sawn monocrystalline silicon wafers
14. Study on mechanism of crack propagation of sapphire single crystals of four different orientations under impact load and static load10.1016/j.ceramint.2019.01.021 ↗
15. Study on nucleation and propagation of median cracks generated by scratching single crystal silicon10.1016/j.mssp.2019.104691 ↗
16. Fracture of brittle solids (Cambridge solid state science series)10.1115/1.3424125 ↗
17. Nucleation location and propagation direction of radial and median cracks for brittle material in scratching10.1016/j.ceramint.2019.01.046 ↗
18. Surface layer damage of silicon wafers sliced by wire saw process10.4028/www.scientific.net/AMR.797.685 ↗
19. Wire saw process-induced surface damage characterization10.1007/s13369-012-0532-7 ↗
20. Evaluation of fixed abrasive diamond wire sawing induced subsurface damage of solar silicon wafers10.1016/j.jmatprotec.2019.116267 ↗
21. Effect of grit shape and crystal structure on damage in diamond wire scribing of silicon10.1111/jace.14732 ↗
22. Subsurface crack damage in silicon wafers induced by resin bonded diamond wire sawing10.1016/j.mssp.2016.10.021 ↗
23. Wafering of silicon (Chapter two)10.1016/bs.semsem.2015.02.003 ↗
24. Study of ductile-to-brittle transition in single grit diamond scribing of silicon: application to wire sawing of silicon wafers10.1115/1.4006177 ↗
25. Generation of diamond wire sliced wafer surface based on the distribution of diamond grits10.1007/s12541-014-0401-2 ↗
26. Depth of cut per abrasive in fixed diamond wire sawing10.1007/s00170-015-7089-z ↗
27. Relationship between the grit cut depth and process parameters in electroplated diamond wire sawing KDP crystal
28. Depth of cut for single abrasive and cutting force in resin bonded diamond wire sawing10.1007/s00170-016-8896-6 ↗
29. The effect of cut depth and distribution for abrasives on wafer surface morphology in diamond wire sawing of PV polycrystalline silicon10.1016/j.mssp.2018.12.004 ↗
30. Ductile behaviour in single-point diamond-turning of single-crystal silicon10.1016/S0924-0136(02)00124-3 ↗
31. Investigation on critical crack-free cutting depth for single crystal silicon slicing with fixed abrasive wire saw based on the scratching machining experiments10.1016/j.mssp.2017.10.027 ↗
32. Elastic/plastic indentation damage in ceramics: the lateral crack system10.1111/j.1151-2916.1982.tb10782.x ↗
33. Study on cutting force model in ultrasonic vibration assisted side grinding of zirconia ceramics10.1016/j.ijmachtools.2016.01.004 ↗
34. Elastic/plastic indentation damage in ceramics: the median/radial crack system10.1111/j.1151-2916.1980.tb10768.x ↗
35. Characterization of polycrystalline silicon wafers for solar cells sliced with novel fixed-abrasive wire10.1002/pip.923 ↗
36. Three-dimensional shape modeling of diamond abrasive grains measured by a scanning laser microscope10.4028/www.scientific.net/KEM.238-239.131 ↗
37. Analytical prediction for depth of subsurface damage in silicon wafer due to self-rotating grinding process10.1016/j.cap.2019.02.015 ↗
38. Material removal and surface generation mechanisms in diamond wire sawing of silicon crystal10.1016/j.mssp.2019.104642 ↗
39. Study on random vibration of electroplate diamond wire saw subjected to sawing force