Surface corrosion inhibition mechanism of sarcosine as a green novel inhibitor on a novel barrier layer material of cobalt in copper film CMP for GLSI
Source abstract
Abstract
For integrated circuits (IC), as the technology node goes down to 20-14 nm, cobalt (Co) replaces tantalum as a new barrier layer material. The polishing process of multilayer wiring copper (Cu) film polishing is also changing from rough polishing and fine polishing to one-step polishing, and high removal rate (RR) of Cu and close to zero RR of Co are required, which can ensure a high selectivity of Cu/Co RR and stop the Cu film polishing on the barrier layer of Co. For such a goal, the way of decreasing Co RR is key and the selection of eco-friendly inhibitor of Co is essential. In this paper, the surface corrosion inhibition effect of sarcosine on Co in alkaline slurry and the inhibition mechanism were systematically investigated. The results indicated that the removal of Co was inhibited under both static and dynamic conditions with the addition of appropriate amount of sarcosine, which was also verified by scanning electron microscopy (SEM) measurements of cross sections and planes, and the corrosion area was diminished to 11.6%. Through discussing the corrosion inhibition mechanism, it was found that there were two main inhibition ways. One was by performing electrochemical experiments, and it was found that sarcosine primarily inhibited the anodic and cathodic reactions on the Co surface by forming a protective film and preventing further oxidative corrosion of Co. The others were analyzed by UV–visible test and X-ray photoelectron spectroscopy (XPS) test. It was found that sarcosine reacted with Co 2+ in the glycine-based solution to generate mixed complex products deduced by new peaks emerged in XPS spectrogram, and the total amount of oxides and complexes decreased. These results indicated that sarcosine reduced the soluble complexes by competing and weakening the complex reaction with glycine. Furthermore, the Raman test indicated that Co 2+ and sarcosine reacted in a 1:4 ratio to form a weakly stability water-soluble complex. The present study establishes the corrosion inhibition mechanism model of sarcosine on Co, and it also provides a new green corrosion inhibitor for Co with promising practical application.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced materials and composites · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Potassium sorbate as an inhibitor in copper chemical mechanical planarization slurry, Part I
2. Chemical processes in the chemical mechanical polishing of copper10.1016/0254-0584(95)01516-7 ↗
3. A new corrosion inhibitor for copper protection10.1016/j.corsci.2014.03.004 ↗
4. Seed layer enhancement by electrochemical deposition: the copper seed solution for beyond 45 nm10.1016/j.mee.2007.06.014 ↗
5. Surface characteristics of ruthenium in periodate-based slurry during chemical mechanical polishing10.1016/j.mee.2015.12.003 ↗
6. A wafer-scale material removal rate profile model for copper chemical mechanical planarization10.1016/j.ijmachtools.2011.01.007 ↗
7. Roles and mechanism analysis of chitosan as a green additive in low-tech node copper film chemical mechanical polishing10.1016/j.colsurfa.2019.124293 ↗
8. Synergetic effect of H2O2 and glycine on cobalt CMP in weakly alkaline slurry10.1016/j.mee.2014.02.002 ↗
9. Inhibition mechanism of benzotriazole in copper chemical mechanical planarization10.4028/www.scientific.net/AMM.607.74 ↗
10. Controlling the galvanic corrosion of copper during chemical mechanical planarization of ruthenium barrier films
11. Chemical mechanical planarization for microelectronics applications10.1016/j.mser.2004.06.002 ↗
12. Investigation of percarbonate based slurry chemistry for controlling galvanic corrosion during CMP of ruthenium10.1149/2.009305jss ↗
13. Study on the weakly alkaline slurry of copper chemical mechanical planarization for GLSI10.1149/2.0071708jss ↗
14. An empirical approach to explain the material removal rate for copper chemical mechanical polishing10.1016/j.triboint.2011.10.010 ↗
15. Characteristics of abrasive-free micelle slurry for copper CMP10.1149/1.1594731 ↗
16. Synergetic effect of benzotriazole and non-ionic surfactant on copper chemical mechanical polishing in KIO4-based slurries10.1016/j.tsf.2014.01.086 ↗
17. Investigation on inhibition of ruthenium corrosion by glycine in alkaline sodium hypochlorite based solution10.1016/j.apsusc.2019.144976 ↗
18. Functions of Trilon® P as a polyamine in copper chemical mechanical polishing10.1016/j.apsusc.2013.10.020 ↗
19. On the reaction mechanism of a hydroxyethylidenediphosphonic acid-based electrolyte for electrochemical mechanical polishing of copper10.1016/j.elecom.2019.05.001 ↗
20. A novel approach of chemical mechanical polishing for a titanium alloy using an environment-friendly slurry10.1016/j.apsusc.2017.08.064 ↗
21. Green chemical mechanical polishing of sapphire wafers using a novel slurry10.1039/D0NR04705H ↗
22. Environment friendly chemical mechanical polishing of copper10.1016/j.apsusc.2018.10.133 ↗
23. A novel slurry for chemical mechanical polishing of single crystal diamond10.1016/j.apsusc.2021.150431 ↗
24. Novel rotary chemical mechanical polishing on an integral impeller10.1016/j.jmapro.2021.04.010 ↗
25. Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy10.1016/j.apsusc.2019.144670 ↗
26. Chemical mechanical polishing for sapphire wafers using a developed slurry10.1016/j.jmapro.2021.01.004 ↗
27. Effect of lanthanum doping in ceria abrasives on chemical mechanical polishing selectivity for shallow trench isolation10.1016/j.mssp.2015.01.049 ↗
28. Effect of glycine and hydrogen peroxide on chemical-mechanical planarization of copper10.1016/S0040-6090(02)00989-6 ↗
29. Chemical roles on Cu-slurry interface during copper chemicalmechanical planarization10.1016/j.apsusc.2013.12.150 ↗
30. Study on effect of complexing agents on Co oxidation/dissolution for chemical-mechanical polishing and cleaning process10.1016/j.mee.2020.111308 ↗
31. Elucidating Cu-glycine and BTA complexations in Cu-CMP using SIMS and XPS
32. Chromium-based regulations and greening in metal finishing industries in the USA10.1016/S1462-9011(02)00028-X ↗
33. Chemistry of corrosion inhibitors10.1016/S0958-9465(03)00037-4 ↗
34. Effect of serine, threonine and glutamic acid on the corrosion of copper in aerated hydrochloric acid solution10.1016/j.corsci.2008.09.007 ↗
35. Inhibitory effect of amino acids on Al pitting corrosion in 0.1 M NaCl10.1023/A:1018490727290 ↗
36. Inhibition effect of glycine on molybdenum corrosion during CMP in alkaline H2O2 based abrasive free slurry10.1016/j.apsusc.2017.08.140 ↗
37. Effects of sarcosine, a glycine transporter type 1 inhibitor, in two mouse seizure models10.1016/S1734-1140(10)70279-6 ↗
38. The glycine transport inhibitor sarcosine is an inhibitory glycine receptor against10.1016/j.neuropharm.2009.07.019 ↗
39. Surface action mechanism and planarization effect of sarcosine as an auxiliary complexing agent in copper film chemical mechanical polishing10.1016/j.apsusc.2020.147109 ↗
40. Pourbaix · 1974
41. Study on the film forming mechanism, corrosion inhibition effect and synergistic action of two different inhibitors on copper surface chemical mechanical polishing for GLSI10.1016/j.apsusc.2019.144507 ↗
42. Study on effective methods and mechanism of inhibiting cobalt removal rate in chemical mechanical polishing of GLSI low-tech node copper film10.1149/2.0271910jss ↗
43. Study on effect of complexing agents on Co oxidation/dissolution for chemical-mechanical polishing and cleaning process10.1016/j.mee.2020.111308 ↗
44. Chemical mechanical planarization of copper in alkaline slurry with uric acid as inhibitor10.1016/j.electacta.2007.04.044 ↗
45. Effect of ionic strength on ruthenium CMP in H2O2based slurries10.1016/j.apsusc.2014.08.063 ↗
46. Effects of nitrilotriacetic acid and corrosion inhibitor on cobalt barrier chemical-mechanical polishing: experimental and density functional theory analysis10.1016/j.colsurfa.2020.125392 ↗
47. Paper electrophoretic determination of the stability constants of biologically significant binary complexes of beryllium(II) and cobalt(II) with sarcosine10.1134/S0036023611010220 ↗
48. Compilation of PZC and IEP of sparingly soluble metal oxides and hydroxides from literature10.1016/j.cis.2009.08.003 ↗
49. Ni(II) complex with sarcosine derived from in situ generated ligand: structural, spectroscopic, and DFT studies10.1007/s11224-015-0631-7 ↗
50. Cukrowski · Anal. Chim. Acta · 2007 · 590 · 20310.1016/j.aca.2007.03.031 ↗