journal article·2019-09

Promotional effect of metal doping on nanostructured TiO2 during the photocatalytic degradation of 4-chlorophenol and naproxen sodium as pollutants

Mariana Hinojosa – Reyes, Roberto Camposeco – Solis, Facundo Ruiz, Vicente Rodríguez – González, Edgar Moctezuma

Publisher page

Abstract

Abstract Titania doped nanomaterials were prepared by the sol – gel method. Nickel, copper and iron were employed as doping cations. The as-prepared materials were characterized by X-ray diffraction, N2 physisorption and UV–vis DRS, EDS and XPS techniques. The TiO2-doped materials were evaluated during the photocatalytic degradation of 4-chlorophenol (4-CP) and naproxen (NPX) sodium as water pollutants under UV radiation. According to the photocatalytic activity and kinetic results, T-Cu 1.0 was the material with the best performance during the degradation of 4-CP, showing a degradation performance of 90% (0.1827 L g−1 min−1) after six reaction hours. T-Fe 1.0 was the photocatalyst with the best NPX degradation behavior, showing a degradation efficiency of 97% (0.1111 L g−1 min−1) also after 6 reaction hours. The photocatalytic degradations followed a pseudo-first-order behavior. The remarkable performance of the photocatalysts was due to a higher concentration of Ti3+ species and the presence of Ni2+, Cu2+ and Fe3+, which worked as TiO2 heterojunctions that allowed the degradation improvement of the organic compounds. The T-Cu 1.0 and T-Fe 1.0 materials were used in a reusability test for 4-CP and NPX compounds, showing around 20 and 30% of final deactivation, respectively. This deactivation was due to structural changes in the TiO2 framework and the oxidation state of the doping cation as a consequence of the constant exposure to UV radiation (18 h) and to the accumulation of carbonaceous species on the TiO2 surface. The systematic XPS analysis before and after the photocatalytic evaluation reveals its internal structure and gives insights about it photocatalytic behavior.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced Nanomaterials in Catalysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. TiO2 photocatalysis and related surface phenomena10.1016/j.surfrep.2008.10.001 ↗
2. Photocatalysis on TiO2 surfaces: principles, mechanisms, and selected results10.1021/cr00035a013 ↗
3. Braslavsky · 2011 · 83 · 931
4. Cu-doped TiO2 systems with improved photocatalytic activity10.1016/j.apcatb.2006.03.019 ↗
5. Wavelength-sensitive photocatalytic degradation of methyl orange in aqueous suspensions over Iron(III)-doped TiO2 nanopowders under UV and visible light irradiation10.1021/jp060082z ↗
6. Significant improvement of photocatalytic hydrogen generation rate over TiO2 with deposited CuO10.1016/j.ijhydene.2009.05.119 ↗
7. Study on the synthesis of Ni doped mesoporous TiO2 and its photocatalytic activity for hydrogen evolution in aqueous methanol solution10.1016/j.cplett.2005.08.080 ↗
8. Hydrogen production by tailoring the brookite and Cu2O ratio of sol-gel Cu-TiO2 photocatalysts10.1016/j.chemosphere.2017.06.066 ↗
9. Effects of Fe-doping on the photocatalytic activity of mesoporous TiO2 powders prepared by an ultrasonic method10.1016/j.jhazmat.2006.05.028 ↗
10. Enhancing ethylbenzene vapors degradation in a hybrid system based on photocatalytic oxidation UV/TiO2-In and a biofiltration process10.1016/j.jhazmat.2012.01.035 ↗
11. Effect of brookite phase on the anatase-rutile transition in titania nanoparticles10.1016/S0955-2219(02)00194-2 ↗
12. Inhibition of the anatase-rutile phase transformation with addition of CeO2 to CuO-TiO2 system: Raman spectroscopy, X-ray diffraction, and textural studies10.1021/cm011520b ↗
13. Enhancing effect of iron chlorides on the anatase-rutile transition in titanium dioxide10.1111/j.1151-2916.1999.tb02016.x ↗
14. New understanding of the difference of photocatalytic activity among anatase, rutile and brookite TiO10.1039/C4CP02201G ↗
15. Crystalline structure, surface morphology and optical properties of In2O3-TiO2 composite thin films by sol-gel method10.1016/j.mseb.2008.05.019 ↗
16. Wagner · 1979
17. Evidence of oxygen vacancy induced room temperature ferromagnetism in solvothermally synthesized undoped TiO2 nanoribbons10.1039/c3nr00799e ↗
18. XPS characterization of Au/TiO2catalysts: binding energy assessment and irradiation effects10.1016/j.apcata.2010.05.039 ↗
19. Determination of the concentration of surface hydroxyl groups, on metal oxide films by a quantitative XPS method10.1002/(SICI)1096-9918(199807)26:8<549::AID-SIA396>3.0.CO;2-Q ↗
20. XPS depth profile analysis of non-stoichiometric NiO films10.1002/sia.1640 ↗
21. Photocatalytic degradation of methylene blue dye using Fe2O3/TiO2 nanoparticles prepared by sol – gel method10.1016/j.jallcom.2012.10.038 ↗
22. A comparative study for removal of different dyes over M/TiO2 (M = Cu, Ni, Co, Fe, Mn and Cr) photocatalysts under visible light irradiation10.1016/j.jphotochem.2015.05.037 ↗
23. Improvement of the photocatalytic properties of TiO2 by (Fe+Mo) co-doping – a possible way to retard the recombination process10.1063/1.4819449 ↗
24. Fe3+-doped anatase TiO2 with d-d transition, oxygen vacancies and Ti3+ centers: synthesis, characterization, UV-vis photocatalytic and mechanistic studies10.1021/acs.iecr.6b01104 ↗
25. Visible light photocatalytic activity of sol-gel Ni-doped TiO2 on p-arsanilic acid degradation10.1007/s10971-018-4579-0 ↗
26. Synthesis of protonated titanate nanotubes tailored by the washing step: effect upon acid properties and photocatalytic activity10.1016/j.jphotochem.2017.03.012 ↗
27. Effect of incorporating vanadium oxide to TiO2, Zeolite-ZM5, SBA and P25 supports on the photocatalytic activity under visible light10.1016/j.jphotochem.2018.08.011 ↗