Uniform, large-scale growth of WS2 nanodomains via CVD technique for stable non-volatile RRAM application
Source abstract
Abstract
Abstract By controlling the voltage-polarity, a bipolar resistive switching (RS) behavior was observed in CVD grown tungsten disulfide (WS2) thin film memory device fabricated on Pt/Ti/SiO2/Si substrate with top Al contacts. The RS performance of the device did not degrade even after repetitive voltage cycles, which indicate uniformity and reproducibility. A decent on/off ratio, high retention time, and a large endurance were respectively recorded to establish the non-volatile memory characteristics in a device with thin layer of WS2. The XRD, Raman, FESEM and EDAX measurement were included as the structural and compositional details of CVD grown WS2 thin film. The current conduction mechanisms were discussed on the basis of experimental data using various existing fitting models. This work also explained the mechanism of resistance switching in CVD grown Tungsten Disulfide. The findings offered a feasible approach towards fabrication and application of the Al/WS2/Pt/Ti/SiO2/Si device.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Memory and Neural Computing · 2D Materials and Applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Low-power switching of nonvolatile resistive memory using hafnium oxide10.1143/JJAP.46.2175 ↗
2. The band-gap energy dependence of metal oxides on non-linear characteristics in the HfO2-based resistive random access memory10.1016/j.mee.2015.04.120 ↗
3. Single-layer MoS2 transistors10.1038/nnano.2010.279 ↗
4. Understanding of MoS2/GaN heterojunction diode and its photodetection properties10.1038/s41598-018-30237-8 ↗
5. Vertical-tunnel field-effect transistor based on a silicon–MoS2 three-dimensional–two-dimensional heterostructure10.1021/acsami.8b11396 ↗
6. Atomristor: nonvolatile resistance switching in atomic sheets of transition metal dichalcogenides10.1021/acs.nanolett.7b04342 ↗
7. A multi-level bipolar memristive device based on visible light sensing MoS2 thin film10.1088/2053-1591/ab154d ↗
8. Controlling resistive switching by using an optimized MoS2 interfacial layer and the role of top electrodes on ascorbic acid sensing in TaOx-based RRAM10.1021/acs.langmuir.8b04090 ↗
9. W. Lu, W. Chen, Y. Li, P. Thapaliya, R. Jha, ReRAM Device Performance Study with Transition Metal Disulfide Interfacial Layer, 72nd Device Research Conference2014, pp. 151-152.10.1109/DRC.2014.6872342 ↗
10. Electronics and optoelectronics of two-dimensional transition metal dichalcogenides10.1038/nnano.2012.193 ↗
11. High performance field-effect transistor based on multilayer tungsten disulfide10.1021/nn505253p ↗
12. Highly flexible and electroforming free resistive switching behavior of tungsten disulfide flakes fabricated through advanced printing technology10.1088/1361-6641/aa77db ↗
13. Large-area WS2 film with big single domains grown by chemical vapor deposition10.1186/s11671-017-2329-9 ↗
14. Comparative study on MoS2 and WS2 for electrocatalytic water splitting10.1016/j.ijhydene.2013.07.021 ↗
15. Identification of individual and few layers of WS2 using Raman Spectroscopy10.1038/srep01755 ↗
16. Strain-induced phonon shifts in tungsten disulfide nanoplatelets and nanotubes10.1088/2053-1583/4/1/015007 ↗
17. Resistive switching effect of Ag/MoS2/FTO device10.1142/S1793604715500101 ↗
18. Anomalous electrical bistability in lateral grain rich polycrystalline molybdenum disulfide thin films10.1016/j.vacuum.2018.05.014 ↗
19. Switching characteristics of$\hbox{Ru/HfO}2 \hbox{/TiO}2-x\hbox{/Ru}$RRAM devices for digital and analog nonvolatile memory applications10.1109/LED.2012.2188775 ↗
20. Switching characteristics of W/Zr/HfO2/TiN ReRAM devices for multi-level cell non-volatile memory applications10.1088/0268-1242/30/7/075002 ↗
21. Multilevel programming in Cu/NiOy/NiOx/Pt unipolar resistive switching devices10.1088/0957-4484/27/43/435701 ↗
22. Electrical reliability, multilevel data storage and mechanical stability of MoS2-PMMA nanocomposite-based non-volatile memory device10.1088/1361-6463/aa71e9 ↗
23. Stable charge retention in graphene-MoS2 assemblies for resistive switching effect in ultra-thin super-flexible organic memory devices10.1016/j.orgel.2018.03.039 ↗
24. Conduction mechanism of valence change resistive switching memory: a survey10.3390/electronics4030586 ↗
25. Incorporation of SnO2 nanoparticles in PMMA for performance enhancement of a transparent organic resistive memory device10.1039/C5RA15581A ↗
26. Recent progress in resistive random access memories: materials, switching mechanisms, and performance10.1016/j.mser.2014.06.002 ↗
27. Improvement of reliability of polymer nanocomposite based transparent memory device by oxygen vacancy rich ZnO nanorods10.1016/j.mee.2016.04.027 ↗
28. Multilevel resistance state of Cu/La2O3/Pt forming-free switching devices10.1007/s10853-016-9753-6 ↗
29. Electrical transport properties of single-crystal Al nanowires10.1088/0957-4484/27/38/385704 ↗
30. Photosensor device based on few-layered WS2 films10.1002/adfm.201300760 ↗
31. Growth of wafer-scale standing layers of WS2 for self-biased high-speed UV–Visible–NIR optoelectronic devices10.1021/acsami.7b16397 ↗
32. Photo-stimulated resistive switching of ZnO nanorods10.1088/0957-4484/23/38/385707 ↗
33. Light induced resistive switching property of solution synthesized ZnO nanorod10.1016/j.optmat.2015.08.001 ↗