Heterogeneous SnO2/ZnO nanoparticulate film: Facile synthesis and humidity sensing capability
Source abstract
Abstract
Abstract Highly sensitive and extremely thin tin oxide/zinc oxide (SnO2/ZnO) heterojunction films were prepared via a two-step solution-based method for humidity-sensing application. The average diameters of the ZnO and SnO2 nanoparticles were 26 and 6 nm, respectively. The deposition of SnO2 for 3 min reduced film resistance from 6.74 MΩ to 0.40 MΩ. Remarkably, the humidity-sensing performance of the heterojunction sensors was critically dependent on deposition time, and sensors subjected to 3 min deposition exhibited the highest sensitivity (90.56) to humidity, which was significantly higher than that of bare ZnO. This study indicates that the use of SnO2/ZnO heterojunction has a great potential in humidity sensing applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Humidity sensors: a review of materials and mechanisms10.1166/sl.2005.045 ↗
2. Optical fiber humidity sensor using a nano Fabry–Perot cavity formed by the ionic self-assembly method10.1016/S0925-4005(99)00232-4 ↗
3. Humidity sensors for a pulmonary function diagnostic microsystem10.1016/S0925-4005(01)00597-4 ↗
4. Fast-response surface acoustic wave humidity sensor based on hematoporphyrin film10.1016/j.snb.2009.02.009 ↗
5. A humidity sensor based on a hetero-core optical fiber10.1016/j.snb.2010.03.049 ↗
6. Fast response humidity sensors for a medical microsystem10.1016/S0925-4005(03)00090-X ↗
7. Sensitivity optimization of tapered optical fiber humidity sensors by means of tuning the thickness of nanostructured sensitive coatings10.1016/j.snb.2006.06.008 ↗
8. Nanostructured optical fibre sensors for breathing airflow monitoring10.1088/0957-0233/17/5/S44 ↗
9. Critical review of non-invasive respiratory monitoring in medical care10.1007/BF02348078 ↗
10. Compliant and low-cost humidity nanosensors using nanoporous polymer membranes10.1016/j.snb.2005.05.017 ↗
11. Intelligent humidity sensor for wireless sensor network agricultural application10.5121/ijwmn.2011.3111 ↗
12. Fabrication, modeling and simulation of high sensitivity capacitive humidity sensors based on ZnO nanorods10.1016/j.snb.2015.10.012 ↗
13. Humidity sensors based on ZnO/TiO2 core/shell nanorod arrays with enhanced sensitivity10.1016/j.snb.2010.12.024 ↗
14. The role of water vapour in ZnO nanostructures for humidity sensing at room temperature10.1016/j.snb.2014.03.043 ↗
15. Comparative analysis of Ti, Ni, and Au electrodes on characteristics of TiO2 nanofibers for humidity sensor application10.1016/j.jmst.2013.02.017 ↗
16. A facile nanocasting synthesis of mesoporous Ag-doped SnO2 nanostructures with enhanced humidity sensing performance10.1016/j.snb.2015.09.139 ↗
17. Realization of a room-temperature/self-powered humidity sensor, based on ZnO nanosheets10.1016/j.snb.2016.06.097 ↗
18. Electrical characterization of Fe2O3 humidity sensors doped with Li+, Zn2+ and Au3+ ions10.1016/j.snb.2005.06.061 ↗
19. Rapid synthesis of ZnO dandelion-like nanostructures and their applications in humidity sensing and photocatalysis10.1016/j.mssp.2013.09.019 ↗
20. Assembly of bulbous ZnO nanorods to bulbous nanoflowers and their high selectivity towards formaldehyde10.1007/s10854-016-4382-z ↗
21. Effects of reaction time on the morphological, structural, and gas sensing properties of ZnO nanostructures10.1016/j.mssp.2013.10.028 ↗
22. Synthesis and some surface studies of laminated ZnO/TiO2 transparent bilayer by two-step growth10.1016/j.mssp.2015.12.024 ↗
23. Electron transfer properties of organic dye sensitized ZnO and ZnO/TiO2 photoanode for dye sensitized solar cells10.1016/j.rser.2016.03.012 ↗
24. Solution-processed indium-free ZnO/SnO2 bilayer heterostructures as a low-temperature route to high-performance metal oxide thin-film transistors with excellent stabilities10.1039/C6TC03977D ↗
25. Effect of oxygen flow rate on the ultraviolet sensing properties of zinc oxide nanocolumn arrays grown by radio frequency magnetron sputtering10.1016/j.ceramint.2015.11.083 ↗
26. Fabrication of hierarchical Sn-doped ZnO nanorod arrays through sonicated sol–gel immersion for room temperature, resistive-type humidity sensor applications10.1016/j.ceramint.2016.03.071 ↗
27. Structural, optical and gas sensing properties of Ag-SnO2 plasmonic nanocomposite thin films10.1016/j.ceramint.2016.08.017 ↗
28. Fabrication, modeling and simulation of high sensitivity capacitive humidity sensors based on ZnO nanorods10.1016/j.snb.2015.10.012 ↗
29. Fast response relative humidity clad-modified multimode optical fiber sensor with hydrothermally dimension controlled ZnO nanorods10.1016/j.mssp.2017.04.024 ↗
30. Study on the gas-sensitive properties for formaldehyde based on SnO2-ZnO heterostructure in UV excitation10.1016/j.snb.2017.07.197 ↗
31. Influences of film thickness and annealing temperature on properties of sol–gel derived ZnO–SnO2 nanocomposite thin film10.1016/j.apsusc.2014.09.099 ↗
32. ZnO nanostructures decorated hollow glass microspheres as near infrared reflective pigment10.1016/j.ceramint.2017.04.067 ↗
33. Metamorphosis of strain/stress on optical band gap energy of ZAO thin films via manipulation of thermal annealing process10.1016/j.jlumin.2014.12.003 ↗
34. Influence of substrates on the structural and morphological properties of RF sputtered ITO thin films for photovoltaic application10.1016/j.tsf.2008.11.027 ↗
35. Comparison study of transparent RF-sputtered ITO/AZO and ITO/ZnO bilayers for near UV-OLED applications10.1016/j.apsusc.2016.09.080 ↗
36. Influence of Al doping on structural and optical properties of Mg–Al co-doped ZnO thin films prepared by sol–gel method10.1016/j.jallcom.2013.11.061 ↗
37. Thermal annealing-induced formation of ZnO nanoparticles: minimum strain and stress ameliorate preferred c-axis orientation and crystal-growth properties10.1016/j.jallcom.2014.05.036 ↗
38. Effect of thickness on structural, electrical, and optical properties of ZnO: Al films deposited by pulsed laser deposition10.1063/1.2437572 ↗
39. Deposition and characterization of zinc oxide and tin oxide ultrafine particle bilayer thin films10.1016/S0040-6090(98)01088-8 ↗
40. Defect-interface interactions10.1016/j.pmatsci.2015.02.001 ↗
41. Microstructure and Raman scattering of Ag-doping ZnO films deposited on buffer layers10.1016/j.jcrysgro.2014.02.036 ↗
42. Nanoparticles assembled SnO2 nanosheet photocatalysts for wastewater purification10.1016/j.matlet.2017.09.068 ↗
43. Fluorine-doped SnO2 thin films deposited on polymer substrate for flexible transparent electrodes10.1016/j.tsf.2013.08.085 ↗
44. Effect of preheating temperature on structural and optical properties of ZnO thin films by sol–gel process10.1016/j.tsf.2005.06.013 ↗
45. Influence of doping concentrations on the aluminum doped zinc oxide thin films properties for ultraviolet photoconductive sensor applications10.1016/j.optmat.2009.12.005 ↗
46. Influence of the molar concentration and substrate temperature on fluorine-doped zinc oxide thin films chemically sprayed10.1016/j.matlet.2005.11.077 ↗
47. Sensing and structural properties of Ti-doped tin oxide (SnO2) membrane for bio-sensor applications10.1016/j.ceramint.2017.05.073 ↗
48. Anomalous optical absorption limit in InSb10.1103/PhysRev.93.632 ↗
49. Electrical and optical properties of transparent conducting tin doped ZnO thin films10.1007/s10854-011-0462-2 ↗
50. Effect of tin doping on optical properties of nanostructured ZnO thin films grown by spray pyrolysis technique10.1016/j.jallcom.2014.07.086 ↗
51. Optimization of intrinsic hydrogenated amorphous silicon deposited by very high-frequency plasma-enhanced chemical vapor deposition using the relationship between Urbach energy and silane depletion fraction for solar cell application10.1016/j.tsf.2013.01.023 ↗
52. Characterization of sprayed SnO2: Pd thin films for gas sensing applications
53. Effects of thermal annealing of ZnO layers grown by MBE10.1016/S0022-0248(00)00099-3 ↗
54. Influence of film thickness on structural, optical, and electrical properties of spray deposited antimony doped SnO2 thin films10.1016/j.tsf.2015.08.013 ↗
55. Enhanced humidity sensing performance using Sn-Doped ZnO nanorod Array/SnO2 nanowire hetero network fabricated via two-step solution immersion10.1016/j.matlet.2017.09.040 ↗
56. Fabrication and characterization of mesoporous SnO2/ZnO-composite electrodes for efficient dye solar cells10.1039/b311090g ↗
57. Dye-sensitized core−shell nanocrystals: improved efficiency of mesoporous tin oxide electrodes coated with a thin layer of an insulating oxide10.1021/cm0115968 ↗
58. Thickness effect of NiO on the performance of ultraviolet sensors with p-NiO/n-ZnO nanowire heterojunction structure10.1016/j.vacuum.2015.01.018 ↗
59. thickness-dependent characteristics of aluminium-doped zinc oxide nanorod-array-based, ultraviolet photoconductive sensors10.7567/JJAP.51.06FF03 ↗
60. Fabrication of gas sensor based on p-type ZnO nanoparticles and n-type ZnO nanowires10.1016/j.snb.2013.03.002 ↗
61. Analysis on activation energy and humidity sensing application of nanostructured SnO2-doped ZnO material10.1016/j.sna.2016.08.012 ↗
62. Recent development of core-shell SnO2 nanostructures and their potential applications10.1039/C4TC01030B ↗
63. Portable room-temperature self-powered/active H2 sensor driven by human motion through piezoelectric screening effect10.1016/j.nanoen.2014.05.012 ↗
64. An approach to detecting a reducing gas by radial modulation of electron-depleted shells in core-shell nanofibers10.1039/c3ta13087h ↗
65. Bifunctional sensing mechanism of SnO2–ZnO composite nanofibers for drastically Enhancing the sensing behavior in H2 gas10.1021/acsami.5b01817 ↗
66. Enhanced sensitivity and selectivity of brush-like SnO2 nanowire/ZnO nanorod heterostructure based sensors for volatile organic compounds10.1039/C4RA05914J ↗
67. Reduced graphene oxide decorated with Fe doped SnO2 nanoparticles for humidity sensor10.1016/j.apsusc.2017.01.064 ↗
68. Piezo/active humidity sensing of CeO2/ZnO and SnO2/ZnO nanoarray nanogenerators with high response and large detecting range10.1016/j.snb.2014.08.060 ↗
69. Humidity-sensing properties of hierarchical ZnO/MWCNTs/ZnO nanocomposite film sensor based on electrostatic layer-by-layer self-assembly10.1007/s10854-015-4049-1 ↗
70. Synthesis and humidity sensing properties of the VO2(B)@ZnO heterostructured nanorods10.1016/j.ceramint.2016.03.025 ↗
71. A resistive-type humidity sensor based on polypyrrole and ZnO nanoparticles: hybrid polymers vis-a-vis nanocomposites10.1039/C6RA24002J ↗