journal article·2015-03

Deformation and removal characteristics in nanoscratching of 6H-SiC with Berkovich indenter

Binbin Meng, Feihu Zhang, Zhipeng Li

Publisher page

Abstract

Abstract In order to analyze the deformation characteristics and removal mechanism of the single crystal silicon carbide at the nanoscale, the nanoscratching test was conducted on 6H SiC (0001) by using a Berkovich diamond indenter. The deformation and removal characteristics of 6H-SiC during a nanoscratching process by using a sharp indenter are significantly different from those through a single-point diamond turning (SPDT) method. The characteristics in different regimes of the scratching process like plastic flow and the form of fracture behavior were analyzed. The ductile/brittle transition (DBT) of this material was discussed in detail theoretically and experimentally. X-ray diffraction and a laser micro-Raman spectrometer were used for phase analysis after the scratching process. The results indicate that phase transformation has not occurred during the nanoscratching process of this material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Zolper · MRS Bull. · 2005 · 30 · 27310.1557/mrs2005.73 ↗
2. Pirouz · Ultramicroscopy · 1993 · 51 · 18910.1016/0304-3991(93)90146-O ↗
3. Yin · Int. J. Mach. Tool. Manuf. · 2004 · 44 · 60710.1016/j.ijmachtools.2003.12.006 ↗
4. Watanabe · Key Eng. Mater. · 2003 · 238 · 17510.4028/www.scientific.net/KEM.238-239.175 ↗
5. Tanaka · CIRP Ann.-Manuf. Technol. · 2013 · 62 · 5510.1016/j.cirp.2013.03.098 ↗
6. Patten · Trans. ASME · 2005 · 127 · 52210.1115/1.1843151 ↗
7. Gogotsi · Mater. Res. Innov. · 1997 · 1 · 310.1007/s100190050011 ↗
8. Ng · Int. J. Mach. Tool. Manuf. · 2006 · 46 · 92910.1016/j.ijmachtools.2005.08.004 ↗
9. Patten · J. Manuf. Process. · 2008 · 10 · 2810.1016/j.jmapro.2008.08.001 ↗
10. J. Jacob, J.A. Patten, B. Bhattacharya, J.A. Couey, E.R. Marsh, Proceedings of the American Society for Precision Engineering – ASPE, 2005.
11. Goel · Int. J. Mach. Tool. Manuf. · 2013 · 65 · 1510.1016/j.ijmachtools.2012.09.001 ↗
12. Cai · Int. J. Mach. Tool. Manuf. · 2007 · 47 · 7510.1016/j.ijmachtools.2006.02.016 ↗
13. Axen · Tribol. Int. · 1997 · 30 · 46710.1016/S0301-679X(97)00009-1 ↗
14. Le Houérou · J. Non-Cryst. Solids · 2003 · 316 · 5410.1016/S0022-3093(02)01937-3 ↗
15. Wasmer · Adv. Eng. Mater. · 2005 · 7 · 30910.1002/adem.200500044 ↗
16. Naimi-Jamal · Macromol. Symp. · 2008 · 274 · 7210.1002/masy.200851411 ↗
17. Kaupp · 2006
18. Kaupp · Z. Metallkunde · 2004 · 95 · 29710.3139/146.017952 ↗
19. Bifano · J. Eng. Ind. · 1991 · 113 · 18410.1115/1.2899676 ↗
20. Shim · Acta Mater. · 2008 · 56 · 382410.1016/j.actamat.2008.04.013 ↗
21. Lucca · CIRP Ann. Manuf. Technol. · 1991 · 40 · 6910.1016/S0007-8506(07)61936-2 ↗
22. Lucca · Ann. CIRP · 1993 · 42 · 8310.1016/S0007-8506(07)62397-X ↗
23. Ikawa · Nanotechnology · 1992 · 3 · 610.1088/0957-4484/3/1/002 ↗
24. Lee · Int. J. Mach. Tool. Manuf. · 2012 · 61 · 7110.1016/j.ijmachtools.2012.05.011 ↗
25. Baietto · Tribol. Int. · 2011 · 144 · 132010.1016/j.triboint.2010.04.014 ↗