Subsurface crack damage in silicon wafers induced by resin bonded diamond wire sawing
Source abstract
Abstract
Abstract In order to optimize the process of wire sawing, this work studied the subsurface crack damage in silicon wafers induced by resin bonded diamond wire sawing using theoretical and experimental methods. A novel mathematical relationship between subsurface crack damage depth and processing parameters was established according to the indentation fracture mechanics. Sawing experiment using resin bonded diamond wire saw was performed on a wire saw machine. The validity of the proposed model was conducted by comparing with the experimental results. At last, the influences of processing parameters on subsurface damage depth were discussed. Results indicate that the median cracks are mainly oblique cracks which generate the subsurface crack damage. On the diamond wire saw cross section, the abrasives with the position angle 78° between abrasive position and vertical direction generate the largest subsurface damage depth. Furthermore, abrasives, generating the subsurface damage, tend away from the bottom of diamond wire with the increase of wire speed or decreases with the increase of feed rate. However, the wire speed and feed rate have opposite effects on the subsurface crack damage depth. In addition, the subsurface crack damage depth is unchanged when the ratio of feed rate and wire speed does not change.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. P.P. Hed, D.F. Edwards, J.B. Davis, Subsurface Damage in Optical Materials: Origin, Measurement and Removal, Lawrence Livermore National Laboratory (LLNL) Report, 1989, pp. 1–1710.1364/OFT.1988.WC1 ↗
2. D.W. Camp, M.R. Kozlowski, et al., Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces, Laser-Induced Damage in Optical Materials International Society for Optics and Photonics, 1998, pp. 356–36410.1117/12.307044 ↗
3. C. Funke, O. Sciurova, O. Kiriyenko, H.J. Möller, Surface damage from multi-wire sawing and mechanical properties of silicon wafers, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference, 2005, pp. 6–10.
4. Determination of the impact of the wire velocity on the surface damage of diamond wire sawn silicon wafers10.1016/j.egypro.2015.07.124 ↗
5. Wafering of silicon10.1016/bs.semsem.2015.02.003 ↗
6. Surface layer damage of silicon wafers sliced by wire saw process10.4028/www.scientific.net/AMR.797.685 ↗
7. Characterization of polycrystalline silicon wafers for solar cells sliced with novel fixed-abrasive wire10.1002/pip.923 ↗
8. B. Sopori, P. Basnyat, S. Devayajanam, et al., Analyses of diamond wire sawn wafers: effect of various cutting parameters, in: Proceedings of the 42th IEEE Photovoltaic Specialists Conference (PVSC), 2015, pp. 1–6.10.1109/PVSC.2015.7356033 ↗
9. Wire saw process-induced surface damage characterization10.1007/s13369-012-0532-7 ↗
10. The structure of abraded glass surfaces10.1088/1475-4878/23/3/301 ↗
11. Subsurface damage in microgrinding optical glasses
12. Investigation of subsurface damage depth of single crystal silicon in electroplated wire saw slicing10.4028/www.scientific.net/KEM.416.306 ↗
13. Material removal mechanisms from grinding to polishing
14. Elastic/plastic indentation damage in ceramics: the median/radial crack system10.1111/j.1151-2916.1980.tb10768.x ↗
15. Generation of diamond wire sliced wafer surface based on the distribution of diamond grits10.1007/s12541-014-0401-2 ↗
16. Analysis of grit cut depth in fixed-abrasive diamond wire saw slicing single crystal silicon10.4028/www.scientific.net/SSP.175.72 ↗
17. Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grinding10.1016/j.ijmachtools.2007.10.013 ↗
18. Depth of cut per abrasive in fixed diamond wire sawing10.1007/s00170-015-7089-z ↗