Surface passivation of CdZnTe wafers
Source abstract
Abstract
Abstract The chemical polishing process and the subsequent passivation process of CdZnTe wafers were studied. The treatment effects were tested through XPS analysis and I–V measurement. The chemical etching in 2%Br–MeOH solution may effectively remove the damaged layer and improve the ohmic contact between CdZnTe wafer and Au electrodes. CdZnTe wafers after Br–MeOH etching were passivated with five different passivants respectively. It was found that the surface leakage currents of all CdZnTe wafers passivated with different passivants were reduced by 1–2 orders. CdZnTe wafer passivated in NH4F/H2O2 solution showed the best passivation efficiency because the enriched Te on the surface was fully oxidized to TeO2, which results in the thickest oxide layer, the most stoichiometric surface and the least leakage current. The surface of CdZnTe wafer is Te-rich after passivated in NH4F/H2O2 or H2O2 solution and Cd-rich after passivated in KOH or KOH/H2O2 solution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Semiconductor Detectors and Materials · Semiconductor Quantum Structures and Devices · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Interfacial chemistry and the performance of bromine-etched CdZnTe radiation detector devices10.1109/TNS.2002.801705 ↗
2. Study of oxidized cadmium zinc telluride surfaces10.1116/1.580719 ↗
3. Surface passiviation of cadmium zinc telluride radiation detectors by potassium hydroxide solution10.1007/s11664-000-0210-5 ↗
4. James, Ralph, Burger, et al. Method for surface treatment of a cadmium zinc telluride crystal. United States Patent: 5933706, 1997.
5. Influence of detector surface processing on detector performance10.1016/S0168-9002(00)00868-8 ↗
6. Exploratory search for improved oxidizing agents used in the reduction of surface leakage currents of CdZnTe detectors10.1117/12.366617 ↗
7. Evaluation of NH4F/H2O2 effectiveness as a surface passivation agent for Cd1−xZnxTe crystals10.1117/12.407594 ↗
8. Effects of surface roughness on large-volume CdZnTe nuclear radiation detectors and removal of surface damage by chemical etching10.1117/12.510180 ↗
9. Photoluminescence study on the effects of the surface of CdTe by surface passivation10.1063/1.369364 ↗
10. Study of gamma-ray detector performance of Cd1−XZnXTe crystal treated by different etchants10.1117/12.245128 ↗
11. Low-temperature photoluminescence of detector grade Cd1−xZnxTe crystal treated by different chemical etchants10.1063/1.363222 ↗
12. The effects of chemical etching on the charge collection efficiency of {111} Oriented Cd0.9Zn0.1Te Nuclear Radiation Detectors10.1109/TNS.2002.803852 ↗
13. Thermal oxidation of CdTe surfaces and the properties of MOS diodes10.1016/0168-9002(89)91370-3 ↗
14. Performance of CdZnTe detectors passivated with energetic oxygen atoms10.1016/S0168-9002(98)00951-6 ↗
15. Passivaion of CdZnTe surface by oxidation in low energy atomic oxygen10.1116/1.581557 ↗
16. Development of dry processing techniques for CdZnTe surface passivation10.1007/s11664-999-0057-3 ↗
17. Hoffbauer MA, Prettyman, et al. Reduction of surface leakage current by surface passivation of CdZnTe and other materials using hyperthermal oxygen atoms. United State Patent: 6168967, 1997.
18. The surface passivation of CdZnTe as to ZnS thickness and pre-heating10.1016/j.cap.2004.04.004 ↗
19. Dean · 1999
20. Shouchun · 1994
21. Shichang · 2003