Synthesis of ZnO and Fe2O3 nanoparticles by sol–gel method and their application in dye-sensitized solar cells
Source abstract
Abstract
Abstract ZnO and Fe2O3 nanoparticles have been formed in a silica matrix, through the sol–gel method and were used as a photoanode to fabricate dye-sensitized solar cells (DSCs). The obtained oxides were characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscope and UV–visible absorption spectroscopy. The results indicate that ZnO and Fe2O3 prepared by this method may be used as photoanodes in photo-electro-chemical energy conversion systems. DSSCs have been built using eosin Y as photosensitizer and their photocurrent, open-circuit voltage, fill factor and efficiency have been measured under direct sunlight illumination (1000 Wcm−2). A ZnO-film solar cell had the best performance with an open-circuit voltage of Voc=0.7 V and short-circuit current density of Isc=490 μA/cm2. This was attributed to high optical gap energy and transparency of ZnO compared to Fe2O3. The effects of annealing temperature and concentration of Fe2O3 on conversion efficiency of the Fe2O3 based solar cell were also studied.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Dye-sensitized solar cells with natural dyes extracted from achiote seeds10.1016/j.solmat.2009.05.013 ↗
2. Stable dye-sensitized solar cells based on organic chromophores and ionic liquid electrolyte10.1016/j.solener.2011.02.025 ↗
3. Improved performance of dye-sensitized solar cell using a TiO2/ZnO/Eosin Y electrode10.1016/S0927-0248(03)00065-5 ↗
4. Dye-sensitized solar cell10.1016/S1389-5567(03)00026-1 ↗
5. Preparation of c-axis orientation zinic-oxide thin films and the study of their microstructure and optical properties
6. Optical and electrochemical characteristics of sol–gel deposited iron oxide films10.1016/S0927-0248(98)00152-4 ↗
7. Effect of thermal annealing treatment on structural electrical and optical properties of transparent sol–gel ZnO thin films10.1016/j.materresbull.2005.06.010 ↗
8. Synthesis of MgO–SiO2 and CaO–SiO2 amorphous powdered by sol–gel process and iron exchange10.1016/S0022-3093(99)00370-1 ↗
9. Structural and photoelectrochemical characteristics of nanocrystalline ZnO electrode with eosin Y10.1016/j.ceramint.2005.03.030 ↗
10. Sol–gel synthesis and characterization of ZnO-based nanosystemes10.1016/S0040-6090(01)01158-0 ↗
11. Fe2O3–SiO2 composites obtained by sol–gel10.1016/S0167-2738(02)00713-0 ↗
12. Temperature dependent studies of CdS nanoparticles in viscous matrix10.1016/j.optmat.2004.09.015 ↗
13. Nickel ferrite on silica nanocomposites prepared by sol–gel method10.1016/j.jmmm.2004.02.020 ↗
14. A high-light-harvesting- efficiency coumarin dye for stable dye-sensitized solar cells
15. Efficient photon-to-electron conversion with rhodamine 6G-sensitized nanocrystalline n-ZnO thin film electrodes in acetonitrile solution10.1016/S0927-0248(02)00417-8 ↗
16. Eosin Y-sensitzed nanocrystalline SnO2/TiO2 solar cells10.1016/S0167-577X(02)01015-7 ↗
17. The effect of pre-thermal treatment on TiO2 nano-particles on the performance of dye-sensitized solar cells10.1016/j.solmat.2005.06.001 ↗
18. Effect of annealing conditions on the photoelectrochemical properties of dye-sensitized solar cells made with ZnO nanoparticles10.1016/j.solener.2010.02.010 ↗