Experiment study on electroplated diamond wire saw slicing single-crystal silicon
Source abstract
Abstract
Abstract This paper conducted the slicing experiments of single-crystal silicon using a reciprocating electroplated diamond wire saw. The machined wafer topography and wire wear were observed by using scanning electron microscope (SEM). The influences of process parameters and cutting fluids on single-crystal silicon wafer surface roughness (SR), subsurface micro-crack damage (SSD) depth, total thickness variation (TTV) and warp were investigated. The bonded interface sectioning technique was used to examine the cut wafers SSD depth. Study results show that a higher wire speed and lower ingot feed speed can produce lower wafer SR and SSD; the lower warp of wafer needs lower wire speed and ingot feed speed; and low wafer TTV can be obtained by an appropriate matching relationship between wire speed and ingot feed speed. The synthetic cutting fluid has a better total effect to improve the wafer quality. The pulled-out of diamond abrasives is the main wear form of wire, which indicates that more research on improving the abrasives retaining strength on wire surface should be investigated in fixed-abrasive wire manufacturing process, in order to improve the wire life and wire saw machining process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. A grinding-based manufacturing method for silicon wafers: an experimental investigation10.1016/j.ijmachtools.2004.12.006 ↗
2. Multi-objective optimization for silicon wafer slicing using wire-EDM process10.1016/j.mssp.2015.06.050 ↗
3. A study on surface grinding of 300mm silicon wafers10.1016/S0890-6955(01)00122-5 ↗
4. Free abrasive machining in slicing brittle materials with wiresaw10.1115/1.1348019 ↗
5. Elasto-hydrodynamic interaction in the free abrasive wafer slicing using a wiresaw: modeling and finite element analysis10.1115/1.555375 ↗
6. 〈http://www.dmt-inc.com〉
7. M.B. Smith, F. Schmid, P. Khattak, L. Teale, J.G. Summers, Multi-wire fast slicing for photovoltaic applications, in: Proceedings of the 22nd IEEE Photovoltaic Specialists Conference, Las Vegas, USA, 1991, pp. 979–981.10.1109/PVSC.1991.169355 ↗
8. Cutting performance of diamond plated wire tools10.2493/jjspe.58.2013 ↗
9. Study on machining characteristics of wire tool with electrodeposited diamond grains10.1299/kikaic.60.1815 ↗
10. Fixed abrasive diamond wire machining – Part I: process monitoring and wire tension force10.1016/S0890-6955(02)00215-8 ↗
11. Fixed abrasive diamond wire machining – Part II: experiment design and results10.1016/S0890-6955(02)00216-X ↗
12. Fixed abrasive diamond wire saw slicing of single-crystal SiC wafers10.1081/AMP-120029960 ↗
13. Characterization of polycrystalline silicon wafers for solar cells sliced with novel fixed-abrasive wire10.1002/pip.923 ↗
14. Mechanical strength of silicon wafers cut by loose abrasive slurry and fixed abrasive diamond wire sawing10.1002/adem.201100263 ↗
15. Thin Czochralski silicon solar cells based on diamond wire sawing technology10.1016/j.solmat.2011.11.028 ↗
16. Development of a high-speed manufacturing method for electroplated diamond wire tools10.1016/S0007-8506(07)60584-8 ↗
17. Development of fixed-abrasive-grain wire saw with less cutting loss
18. Multi-wire sawing of sapphire crystals with reciprocating motion of electroplated diamond wires10.1016/j.cirp.2013.03.122 ↗
19. Distribution of diamond grains in fixed abrasive wire sawing process10.1007/s00170-014-5782-y ↗
20. Force modeling and control of SiC monocrystal wafer processing10.1115/1.4029432 ↗
21. Determination of the impact of the wire velocity on the surface damage of diamond wire sawn silicon wafers10.1016/j.egypro.2015.07.124 ↗
22. Improvement of wire electrical discharge machining efficiency in machining polycrystalline silicon with auxiliary-pulse voltage supply10.1007/s00170-011-3350-2 ↗
23. Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grinding10.1016/j.ijmachtools.2007.10.013 ↗
24. Warp of silicon wafers produced from wiresaw slicing: modeling, simulation, and experiments10.1149/1.2195654 ↗
25. A finite element analysis of temperature variation in silicon wafers during wiresaw slicing10.1016/j.ijmachtools.2007.07.009 ↗
26. S. Hsu, J. Gu, Y. Wang, Methods for Machining Hard Materials Using Alcohols: USA, 6206764 [P], 27.03.2001