journal article·2019-10

Acetone sensor based on WO3 nanocrystallines with oxygen defects for low concentration detection

Jing Lu, Can Xu, Long Cheng, Na Jia, Jianfeng Huang, Cuiyan Li

Publisher page

Abstract

Abstract In this work, the monoclinic and hexagonal phase of WO3 nanocrystallines are prepared by a facile one-pot microwave assisted hydrothermal method. The obtained WO3 are fabricated as gas sensors to detect acetone vapor. The microstructure and sensing performances of different WO3 phases are studied comparatively. The results show that the precursor pH value affects precipitation of H2WO4 and subsequently decomposition of H2WO4 to WO3. Hydrochloric acid plays very important role both in adjusting pH and modulating WO3 morphology. The monoclinic WO3 with oxygen vacancy exhibits outstanding high sensitivity and fast response to a wide concentration range of acetone (0.25 ppm–100 ppm). The response value reaches 3.8–250 ppb, and 31–100 ppm respectively, at optimal working temperature of 320 °C. The detection limit is estimated as low as 7.5 ppb. The excellent sensing performance of the monoclinic WO3 is attributed to the lattice oxygen defects which facilitate acetone adsorption on the material surface. Furthermore, the strong dipole moment interactions between monoclinic WO3 and acetone molecules help enhancing the selectivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Breath analysis: Potential for clinical diagnosis and exposure assessment10.1373/clinchem.2005.063545 ↗
2. Technologies for clinical diagnosis using expired human breath analysis10.3390/diagnostics5010027 ↗
3. Superior acetone gas sensor based on electrospun SnO2 nanofibers by Rh doping10.1016/j.snb.2017.10.011 ↗
4. Acetone sensing of ZnO nanosheets synthesized using room-temperature precipitation10.1016/j.snb.2017.04.007 ↗
5. Facile preparation of hierarchical Sb-doped In2O3 microstructures for acetone detection10.1016/j.snb.2018.05.046 ↗
6. Polyhedral a-Fe2O3 crystals@RGO nanocomposites: Synthesis, characterization, and application in gas sensing10.1016/j.jallcom.2017.10.205 ↗
7. Combustion synthesized hierarchically porous WO3 for selective acetone sensing10.1016/j.matchemphys.2016.09.036 ↗
8. Synthesis and excellent acetone sensing properties of porous WO3 nanofibers10.1016/j.vacuum.2015.11.010 ↗
9. WO3 nanocrystals: Synthesis and application in highly sensitive detection of acetone10.1016/j.snb.2011.02.047 ↗
10. Solvent-regulated solvothermal synthesis and morphology-dependent gas-sensing performance of low-dimensional tungsten oxide nanocrystals10.1016/j.snb.2014.09.007 ↗
11. Facile synthesis and gas sensing properties of In2O3–WO3 heterojunction nanofibers10.1016/j.snb.2014.12.019 ↗
12. Nanostructured tungsten oxide - properties, synthesis, and applications10.1002/adfm.201002477 ↗
13. Surface oxygen vacancies on WO3 contributed to enhanced photothermo - synergistic effect
14. Both oxygen vacancies defects and porosity facilitated NO2 gas sensing response in 2D ZnO nanowalls at room temperature10.1016/j.jallcom.2016.05.053 ↗
15. Ultrasensitive ppb-level NO2 gas sensor based on WO3 hollow nanosphers doped with Fe10.1016/j.apsusc.2017.10.074 ↗
16. Temperature and acidity effects on WO3 nanostructures and gas sensing properties of WO3 nanoplates10.1016/j.materresbull.2014.06.013 ↗
17. Controllability of assemblage from WO3H2O nanoplates to nanoflowers with the assistance of oxalic acid10.1007/s10854-015-3269-8 ↗
18. Crystal transformation of 2D tungstic acid H2WO4 to WO3 for enhanced photocatalytic water oxidation10.1016/j.jcis.2017.12.066 ↗
19. Preparation of WO3 network squares for ultrasensitive photodetectors10.1016/j.jallcom.2011.04.066 ↗
20. Ultrathin WO3 nanosheets modified by g-C3N4 for highly efficient acetone vapor detection10.1016/j.snb.2018.11.138 ↗
21. Thermal treatment effects on the material and gas-sensing properties of room-temperature tungsten oxide nanorod sensors10.1016/j.snb.2008.11.037 ↗
22. NO sensing by single crystalline WO3 nanowires10.1016/j.snb.2015.05.036 ↗
23. Effect of solution concentration on physicochemical and gas sensing properties of sprayed WO3 thin films10.1016/j.cap.2014.11.004 ↗
24. Vertically aligned, double-sided, and self-supported 3D WO3 nanocolumn bundles for low-temperature gas sensing10.1039/C5TA03711E ↗
25. Tunable morphology and ethanol-sensing performance by sintering temperature of WO3-based ceramics, synthesis and reactivity in inorganic, metal-organic10.1080/15533174.2011.568454 ↗
26. Understanding the morphological effects of WO3 photocatalysts for the degradation of organic pollutants10.1016/j.apt.2018.03.024 ↗
27. XPS studies of active elements surface of gas sensors based on WO3−x nanoparticles10.1016/j.elspec.2006.12.059 ↗
28. Sensitive room-temperature H2S gas sensors employing SnO2 quantum wire/reduced graphene oxide nanocomposites10.1021/acs.chemmater.5b04850 ↗
29. Resistive gas sensors based on colloidal quantum dot (CQD) solids for hydrogen sulfide detection10.1016/j.snb.2014.07.058 ↗
30. Exposed facets induced enhanced acetone selective sensing property of nanostructured tungsten oxide10.1039/C4TA01930J ↗
31. Selective diagnosis of diabetes using Pt-functionalized WO3 hemitube networks as a sensing layer of acetone in exhaled breath10.1021/ac303148a ↗
32. Morphology, phase structure and acetone sensitive properties of copper-doped tungsten oxide sensors10.1016/j.snb.2013.11.059 ↗
33. Enhanced acetone response in co-precipitated WO3 nanostructures upon indium doping10.1016/j.snb.2014.11.138 ↗
34. Low-temperature H2S detection with hierarchical Cr-doped WO3 microspheres10.1021/acsami.5b12857 ↗