Micro-nano scaled copper nanowire: Deposited with meniscus-confined electrodeposition
Source abstract
Abstract
Traditional high-temperature soldering, applied to interconnections of solar cells, usually induces thermo-mechanical stress. Metal interconnection via meniscus-confined electrodeposition (MCED) was performed at room temperature. However, it is limited by slow electrodeposition (printing) rate. In this work, the metal printing rate was enhanced by a new MCED system. The printing rate was increased from 507.6 μm 3/s to 624.0 μm 3/s by adjusting the initial meniscus height (IMH). Besides, porous materials were applied to stabilize the meniscus, helping improve the morphology of the printed Cu pillars. Cu pillars with different tilt angles and sizes were prepared with a high printing rate. Finally, a Cu bridge was successfully printed with the new MCED system, which would be applied to solar cells and module interconnections.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanofabrication and Lithography Techniques · Anodic Oxide Films and Nanostructures · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Ultrastable halide perovskite CsPbBr3 photoanodes achieved with electrocatalytic glassy-carbon and boron-doped diamond sheets10.1038/s41467-024-47100-2 ↗
2. A tutorial review of the solar power curve: regressions, model chains, and their hybridization and probabilistic extensions10.1007/s00376-024-3229-4 ↗
3. End-to-end learning of representative PV capacity factors from aggregated PV feed-ins10.1016/j.apenergy.2024.122923 ↗
4. Enhancing electrical and physical contacts of copper-electroplated silicon heterojunction solar cells through chemical pretreated seed layers10.1002/solr.202300938 ↗
5. Silver-lean metallization and hybrid contacts via plating on screen-printed metal for silicon solar cells manufacturing
6. Eddy current soldering of solar cell ribbons under a layer of glass
7. Perovskite/Silicon tandem solar cells: insights and outlooks10.1021/acsenergylett.4c00172 ↗
8. Strategies for minimizing induced thermomechanical stress in glass-glass PV modules with half cells identified using finite element modelling10.1016/j.solener.2023.03.020 ↗
9. Comparative study of parallel gap resistance welding joints between different interconnected foils and GaAs solar cells: microstructure and thermal reliability10.1016/j.jmapro.2023.12.015 ↗
10. Ribbons lengthening induced by thermal cycling in PV modules, Part II: glass-ribbon mechanical interaction through the encapsulant
11. Impact of cracks in solar array on output power of stratospheric airship10.1016/j.solener.2023.112234 ↗
12. A critical review of additive material manufacturing through electrochemical deposition techniques
13. Recent advances in meniscus-on-demand three-dimensional micro- and nano-printing for electronics and photonics10.1088/2631-7990/acdf2d ↗
14. Direct in- and out-of-plane writing of metals on insulators by electron-beam-enabled, confined electrodeposition with submicrometer feature size10.1002/smtd.202301247 ↗
15. Emerging electrochemical additive manufacturing technology for advanced materials: structures and applications10.1016/j.mattod.2023.10.008 ↗
16. Meniscus-confined three-dimensional electrodeposition for direct writing of wire bonds10.1126/science.1190496 ↗
17. Voxelated meniscus-confined electrodeposition of 3D metallic microstructures10.1016/j.ijmachtools.2022.103850 ↗
18. Electrodeposition-based 3D printing of metallic microarchitectures with controlled internal structures10.1002/smll.201500177 ↗
19. The ink cartridge as a major component of an InkJet system
20. Multi-physics simulation of metal printing at micro/nanoscale using meniscus-confined electrodeposition: effect of nozzle speed and diameter
21. Electrocrystallization Nucleation and growth phenomena10.1016/S0013-4686(00)00353-4 ↗
22. Fabrication of micro-sized-copper column array through localized electrochemical deposition using 20-μm-diameter micro-anode10.1007/s10008-021-05095-6 ↗
23. Measurement methods for critical current density
24. Sustainable hydrogen production from seawater electrolysis: through fundamental electrochemical principles to the most recent development10.3390/en15228560 ↗
25. Simulation and experimental study on metal microstructure of meniscus-confined electrodeposition10.1002/adem.202200654 ↗
26. Ultraprecise printing of D-band transmission lines10.1109/LMWT.2023.3300569 ↗