journal article·2025-01

Study on uniform size and spherical CeO2 abrasives synthesized by two-step method and their chemical mechanical polishing performances

Ning Xu, Yu Lin, Yuxin Luo, Jiahui Ma, Yu Huo, Kailong Gao, Ziheng Gao, Zhuo Wang

Publisher page

Abstract

In this study, the synthesis of CeO 2 abrasives by two-step method was studied in detail and compared with one-step method. The micro-morphology, particle size and distribution of abrasives prepared by these two methods were studied. In addition, the chemical mechanical polishing performances of CeO 2 abrasives at different calcination temperatures were tested, including key parameters such as material removal rate (MRR) and surface roughness (Ra). The results show that the CeO 2 abrasives synthesized by one-step method are mainly spherical and irregular polyhedron, and the particle size is 678.85 nm when the calcination temperature is 800 °C. The concentration of oxygen vacancy and Ce 3+ is 13.06 % and 20.12 %, respectively. The highest MRR of quartz glass is 651.09 nm/min and the Ra is 0.52 nm. The CeO 2 abrasives prepared by two-step method are spherical with uniform particle size distribution, the particle size is 98.72 nm. The concentration of oxygen vacancy and Ce 3+ is 18.83 % and 24.97 %, respectively. The highest MRR of quartz glass is 626.97 nm/min and the Ra is 0.1363 nm. Compared with the one-step method, the surface roughness is reduced by 73.79 %. Appropriate abrasives size and uniform particle size distribution can improve the polishing quality of the workpiece. In this paper, it is considered that the two-step method is beneficial to control the morphology and size of CeO 2 abrasives, and provides conditions for the preparation of abrasives with uniform particle size distribution and spherical morphology, so as to improve the properties of chemical mechanical polishing materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced materials and composites · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. A review on the development of ceria for chemical mechanical polishing10.1016/j.powtec.2024.119989 ↗
2. Approaches to sustainability in chemical mechanical polishing (CMP): a review10.1007/s40684-021-00406-8 ↗
3. Research progress on the application of ceria nanoparticles as abrasives in dielectric layer CMP and post cleaning: structure, morphology, doping, and mechanism10.1016/j.colsurfa.2023.132551 ↗
4. Polishing of polycrystalline diamond using synergies between chemical and mechanical inputs: a review of mechanisms and processes10.1016/j.carbon.2022.04.028 ↗
5. Review on modeling and application of chemical mechanical polishing10.1515/ntrev-2020-0016 ↗
6. Chemical–mechanical polishing of 4H silicon carbide wafers10.1002/admi.202202369 ↗
7. Synthesis, crystallography, microstructure, crystal defects, optical and optoelectronic properties of ZnO:CeO2 mixed oxide thin films10.3390/photonics7040112 ↗
8. Some applications of CeO2 nanoparticles10.13005/ojc/390319 ↗
9. Particle size dependence of nanoclustered ceria abrasives on surface activity and chemical mechanical planarization performance10.1016/j.apsusc.2024.160123 ↗
10. Development of Zr- and Gd-doped porous ceria (pCeO2) abrasives for achieving high-quality and high-efficiency oxide chemical mechanical polishing10.1016/j.ceramint.2022.01.289 ↗
11. Structural and electrical properties of CeO2 monolayers using first-principles calculations10.1016/j.ssc.2019.113801 ↗
12. Preparation of spherical ceria coated silica nanoparticle abrasives for CMP application10.1016/j.apsusc.2015.09.149 ↗
13. Changing the calcination temperature to tune the microstructure and polishing properties of ceria octahedrons10.1039/D2RA02367A ↗
14. Preparation of CeO2 particles via ionothermal synthesis and its application to chemical mechanical polishing10.1016/j.colsurfa.2024.134194 ↗
15. RE (La, Nd and Yb) doped CeO2 abrasive particles for chemical mechanical polishing of dielectric materials: experimental and computational analysis10.1016/j.apsusc.2019.144668 ↗
16. Doping strategy on properties and chemical mechanical polishing performance of CeO2 Abrasives: a DFT assisted experimental study10.1016/j.apsusc.2023.156997 ↗
17. Preparation of CeO2 abrasives by reducing atmosphere-assisted molten salt method for enhancing their chemical mechanical polishing performance on SiO2 substrates10.1016/j.jre.2022.10.011 ↗
18. Enhancement mechanism of Y-doped Ce1−xYxO2 for photocatalytic-assisted chemical-mechanical polishing
19. Effect of lanthanum doping in ceria abrasives on chemical mechanical polishing selectivity for shallow trench isolation10.1016/j.mssp.2015.01.049 ↗
20. Preparation, characterization, and application of dendritic silica-supported samarium-doped ceria nanoparticles in ultra-precision polishing for silica films10.1007/s11051-019-4684-1 ↗
21. Polymethylmethacrylate (PMMA)/CeO2 hybrid particles for enhanced chemical mechanical polishing performance10.1016/j.triboint.2014.10.013 ↗
22. Core/shell composites with polystyrene cores and meso-silica shells as abrasives for improved chemical mechanical polishing behavior10.1007/s11051-015-3172-5 ↗
23. Structural regulation and polishing performance of dendritic mesoporous silica (D-mSiO2) supported with samarium-doped cerium oxide composites10.1016/j.apt.2022.103595 ↗
24. Highly dispersed Gd-CeO2 nanocrystals supported on mesoporous silica composite particles towards photochemical (photo-assisted chemical) mechanical polishing10.1016/j.ceramint.2023.02.055 ↗
25. Design of ceria grafted mesoporous silica composite particles for high-efficiency and damage-free oxide chemical mechanical polishing10.1016/j.jallcom.2017.11.112 ↗
26. The effects of precursors on the morphology and chemical mechanical polishing performance of ceria-based abrasives10.3390/ma15217525 ↗
27. Synthesis, phase transformation and applications of CeCO3OH: a review
28. Bifunctional catalytic material: an ultrastable and high-performance surface defect CeO2 nanosheets for formaldehyde thermal oxidation and photocatalytic oxidation10.1016/j.apcatb.2015.08.047 ↗
29. Effect of particle size distribution, pH, and Na+ concentration on the chemical mechanical polishing of sapphire and 4H-SiC (0001)
30. Size effect of CeO2 particle on nanoscale single-asperity sliding friction
31. Effect of grain size on tungsten material removal rate during chemicalmechanical planarization process10.1016/j.mssp.2024.108618 ↗
32. Synthesis of single-crystalline Ce(CO3)(OH) with novel dendrite morphology and their thermal conversion to CeO210.1016/j.materresbull.2009.09.026 ↗
33. Synthesis of hierarchical layered quasi-triangular Ce(OH)CO3 and its thermal conversion to ceria with high polishing performance10.1021/acsomega.2c07682 ↗
34. A novel CeO2/Bi4Ti3O12 composite heterojunction structure with an enhanced photocatalytic activity for bisphenol A10.1016/j.jallcom.2016.07.054 ↗
35. Effects of calcination temperature and heating rate on the photocatalytic properties of ZnO prepared by pyrolysis10.1016/j.jcis.2017.09.021 ↗
36. Investigation of abrasive-free slurry for polysilicon buffing chemical mechanical planarization10.1016/j.mssp.2021.105755 ↗
37. Electrocatalytic properties of Co nanoconical structured electrodes produced by a one-step or two-step method10.3390/catal11050544 ↗
38. Roles of photo-generated holes and oxygen vacancies in enhancing photocatalytic performance over CeO2 prepared by molten salt method10.1016/j.apt.2020.08.017 ↗
39. Performance enhancement of ZnO photocatalyst via synergic effect of surface oxygen defect and graphene hybridization10.1021/la4001768 ↗
40. Tunable magnetization of single domain M-type barium hexagonal ferrite nano powders by Co–Ti substitution via chemical co-precipitation plus molten salts method10.1016/j.ceramint.2022.06.079 ↗
41. X-ray photoelectron spectroscopy and auger electronspectroscopy studies of Al-doped ZnO films10.1016/S0169-4332(99)00601-7 ↗
42. Effect and mechanism of oxidant on alkaline chemical mechanical polishing of gallium nitride thin films10.1016/j.mssp.2021.106272 ↗
43. Evaluation of oxide-chemical mechanical polishing characteristics using ceria-mixed abrasive slurry10.1007/s13391-012-2056-4 ↗
44. Improvement of oxide chemical mechanical polishing performance by increasing Ce3+/Ce4+ ratio in ceria slurry via hydrogen reduction10.1016/j.mssp.2023.107349 ↗
45. Particle size and surfactant effects on chemicalmechanical polishing of glass usingsilica-based slurry10.1364/AO.49.005480 ↗
46. Trivalent lanthanum and ytterbium doped meso-silica/ceria abrasive systems toward chemical mechanical polishing (CMP) and ultraviolet irradiation-assisted photochemical mechanical polishing (PCMP)10.1016/j.apsusc.2024.159733 ↗
47. Synthesis, characterization of CeO2@ZIF-8 composite abrasives and their chemical mechanical polishing behavior on glass substrate10.1016/j.ceramint.2022.10.037 ↗
48. First-principles molecular dynamics investigation of ceria/silica sliding interface toward functional materials design for chemical mechanical polishing process10.1016/j.apsusc.2020.147259 ↗