A special electrostatic self-assembly structure of colloidal silica: Improving Chemical Mechanical Polishing performance
Source abstract
Abstract
Silica nanoparticles are widely utilized abrasives in chemical mechanical polishing (CMP), and the modification of abrasives and the incorporation of chemical additives represent primary strategies for enhancing CMP performance. In this study, we achieved a modification of the electrical properties of the colloidal silica surface by forming a coating film through the "grafting" of 3-aminopropyltriethoxysilane (APTES) onto the colloidal silica surface. This modification resulted in an augmented mechanical interaction between the abrasive and the wafer during the CMP process, leading to an enhanced material removal rate (MRR) of SiO 2 . However, the post-CMP surface exhibited a relatively higher occurrence of surface defects. Subsequently, cetyltrimethylammonium bromide (CTAB) was added as an auxiliary additive, which promoted the formation of a "special electrostatic self-assembly structure" on the surface of the abrasive, further elevating the SiO 2 MRR. Moreover, CTAB demonstrated the capability to adsorb onto the wafer surface, creating a protective effect that resulted in reduced surface roughness and a decrease in surface defects following CMP. Furthermore, comprehensive characterization of the modified abrasive was conducted using techniques such as transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The mechanisms underlying the improvement in CMP performance were systematically analyzed through experimental phenomena and X-ray photoelectron spectroscopy (XPS), and revealing that the introduction of CTAB indirectly facilitated the adsorption of APTES onto the surface of the colloidal silica. Our study provides a method for the advanced process of SiO 2 CMP with stringent metal ion requirements.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Porous Nanosized particles: Preparation, properties, and applications10.1021/cr300439k ↗
2. Bionanotechnology based on silica nanoparticles10.1002/med.20003 ↗
3. Multifaceted application of silica nanoparticles10.1007/s12633-019-00229-y ↗
4. Highly selective chemical mechanical polishing of Si3N4 over SiO2 using advanced silica abrasive10.7567/JJAP.56.056501 ↗
5. Roles of colloidal silicon dioxide particles in chemical mechanical polishing of dielectric silicon dioxide10.1143/JJAP.44.8383 ↗
6. Chemical mechanical polishing: theory and experiment10.1007/s40544-013-0035-x ↗
7. Semi-empirical material removal rate distribution model for SiO2 chemical mechanical polishing (CMP) processes10.1016/j.precisioneng.2012.12.006 ↗
8. Chemical and mechanical balance in polishing of electronic materials for defect-free surfaces10.1016/j.cirp.2009.03.115 ↗
9. Fundamentals of slurry design for CMP of metal and dielectric materials10.1557/mrs2002.245 ↗
10. Effect of particle size and pH value of slurry on chemical mechanical polishing of SiO2 film10.1149/2162-8777/ac495f ↗
11. Influence of slurry components on copper CMP performance in alkaline slurry10.1016/j.mee.2017.10.002 ↗
12. The influence of abrasive particle size in copper chemical mechanical planarization10.1016/j.surfcoat.2012.04.004 ↗
13. Silica abrasives containing solid cores and mesoporous shells: Synthesis, characterization and polishing behavior for SiO2 film10.1016/j.jallcom.2015.12.109 ↗
14. Effect of modified silica abrasive particles on Nanosized particle deposition in final polishing of silicon wafers10.1080/10402004.2013.867467 ↗
15. Preparation of silane modified SiO2 abrasive particles and their Chemical Mechanical Polishing (CMP) performances10.1016/j.wear.2011.05.044 ↗
16. Modification of nanosilica particles with hydrophobic modifier bis[3-(triethoxysilyl)propyl]tetrasulfide by using micro-injection in aqueous solutions10.1016/j.colsurfa.2020.124852 ↗
17. Enhancement in surface finish by modification of basic colloidal silica with silane in chemical mechanical polishing10.1149/2.0141408jss ↗
18. Synergistic effect of aminosilane and K2CO3 on improving Chemical Mechanical Polishing performance of SiO2 dielectric layer10.1016/j.mssp.2022.106702 ↗
19. Particle size and surfactant effects on chemical mechanical polishing of glass using silica-based slurry10.1364/AO.49.005480 ↗
20. Formation of micelle-decorated colloidal silica by adsorption of nonionic surfactant10.1021/la0300939 ↗
21. Effect of ionic strength on ruthenium CMP in H2O2-based slurries10.1016/j.apsusc.2014.08.063 ↗
22. Effect of slurry ionic salts at dielectric silica CMP10.1149/1.1644609 ↗
23. Effect of cations on the chemical mechanical polishing of SiO2 film10.1088/0256-307X/30/9/098103 ↗
24. Influence of K+ ions on the interaction of water with silicon dioxide at low temperature relevant to CMP10.1149/1.1806823 ↗
25. Study on diamond dressing for non-uniformity of pad surface topography in CMP process10.1007/s00170-017-0060-4 ↗
26. Surface Amination of silica nanoparticles using tris(hydroxymethyl)aminomethane10.1021/acs.iecr.0c04346 ↗
27. Structural and thermal characterizations of silica nanoparticles grafted with pendant maleimide and epoxide groups10.1016/j.jcis.2008.08.054 ↗
28. The interface structure of nano-SiO2/PA66 composites and its influence on material's mechanical and thermal properties10.1016/j.apsusc.2007.07.014 ↗
29. Surface modification of silica gels with aminoorganosilanes10.1016/0927-7757(95)03119-X ↗
30. Development and chromatographic exploration of stable-bonded cross-linked amino silica against classical amino phases10.1002/jssc.202200268 ↗
31. Chapter 9 Modification with Silicon Compounds: Mechanistic Studies
32. Isoelectric points and points of zero charge of metal (hydr) oxides: 50 years after Parks' review10.1016/j.cis.2016.10.005 ↗
33. CMP defect reduction and mitigation: practices and future trends
34. Effect of silicon dioxide hardness on scratches in interlevel dielectric chemical–mechanical polishing10.1080/10402004.2013.861048 ↗
35. Correlation of particulate dispersion stability with the strength of self-assembled surfactant films10.1021/la000363c ↗
36. Influence of surfactant and salts on chemical mechanical planarisation of copper10.1016/j.wear.2005.02.093 ↗
37. AFM studies on liquid superlubricity between silica surfaces achieved with surfactant micelles10.1021/acs.langmuir.6b01237 ↗
38. A method to derivatize surface silanol groups to Si-alkyl groups in carbon-doped silicon oxides10.1039/C6RA20355H ↗
39. High-removal selectivity through interaction between polyacrylamide and SiO2 film in poly isolation chemical mechanical planarization10.1166/jnn.2009.NS67 ↗
40. XPS and AFM characterization of aminosilanes with different numbers of bonding sites on a silicon wafer10.1002/sia.5311 ↗