An electromigration study of novel 3D Cu stack-via interconnects for advanced high-density fan-out packaging
Source abstract
Abstract
Novel Cu via interconnects connecting Cu redistribution lines (RDLs) was proposed as advanced fan-out chip on substrate (FOCoS) technology for high-density packaging. The advance in downsizing Cu interconnect structure causes a rising concern for electromigration reliability. In this study, the electromigration behavior and failure mechanism in a novel 3D Cu stack-via interconnect were reported for the first time. The Cu stack-via structures, composed of three vertically stacked Cu microvias, were subjected to electromigration experiments at 5.1 × 10 5 A/cm 2 at 180 °C with opposite electron flow directions to investigate the anisotropic electromigration behavior on the microstructure and electrical performance. Divergent electromigration behavior was disclosed in the Cu stack-via with different electron flow directions. The failure mechanism of the upstream Cu stack-via was governed by a rapid electrical resistance rise at the end of current stressing due to the synergistic local current crowding and Joule heating effects, and the volume shrinkage due to phase transformation further caused the open-circuit failure. The failure mechanism of the downstream Cu stack-via was governed by a gradual electrical resistance rise due to the depletion of Ni diffusion barrier metallization and the subsequent Cu microvia phase transformation to high-resistivity Cu-Sn IMC phases. In this study, the design rules of the Ni metallization thickness required to prevent early Ni metallization depletion and the Cu stack-via configuration to prevent local current crowding for improved electromigration reliability will be investigated for further progress in the novel 3D Cu stack-via interconnect development.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Direct observation of void nucleation and growth in a 2-μm-wide Cu redistribution line during in situ electromigration
2. Microstructural evolution of intermetallic compounds in TCNCP Cu pillar solder joints10.1007/s11664-015-4065-1 ↗
3. Novel Ga assisted low-temperature bonding technology for fine-pitch interconnects
4. The interfacial bilayer Cu6Sn5 formed in a Sn–Ag–Cu flip-chip solder joint incorporating Au/Pd metallization during solid-state aging10.1007/s10854-018-9665-0 ↗
5. Inhibiting the detrimental Cu protrusion in Cu through-silicon-via by highly (111)-oriented nanotwinned Cu10.1016/j.scriptamat.2021.113782 ↗
6. Thermal and mechanical characterization of 2.5-D and fan-out chip on substrate chip-first and chip-last packages10.1109/TCPMT.2022.3145377 ↗
7. Mechanical and thermal characterization analysis of chip-last fan-out chip on substrate
8. Chip last fanout chip on substrate (FOCoS) solution for chiplets integration
9. Heterogeneous 2.5D integration on through silicon interposer10.1063/1.4921463 ↗
10. Reliability challenges in 3D IC packaging technology10.1016/j.microrel.2010.09.031 ↗
11. A comprehensive study of electromigration in pure Sn: effects on crystallinity, microstructure, and electrical property10.1016/j.actamat.2020.09.010 ↗
12. Non-equilibrium supersaturation behavior in a Cu/Sn/Cu interconnect induced by room temperature electromigration10.1016/j.jallcom.2019.03.055 ↗
13. Athermal recrystallization behavior of (Sn) solid-solution at an intermetallic-free Cu/Sn interface induced by room temperature electromigration10.1016/j.matlet.2018.11.034 ↗
14. The dynamic behavior of electromigration in a novel Cu tall pillar/Cu via interconnect for fan-out packaging
15. Athermal and thermal coupling electromigration effects on the microstructure and failure mechanism in advanced fine-pitch Cu interconnects under extremely high current density10.1016/j.matchemphys.2020.123680 ↗
16. An electromigration study of Cu pillar interconnects in flip-chip QFN packaging under extreme conditions for high-power applications
17. Electromigration reliability of advanced high-density fan-out packaging with fine-pitch 2-/2-μm L/S Cu redistribution lines10.1109/TCPMT.2020.2997824 ↗
18. Electromigration failure study of a fine-pitch 2μm/2μm L/S Cu redistribution line embedded in polyimide for advanced high-density fan-out packaging
19. Creep behaviors along characteristic crystal orientations of Sn and Sn-1.8Ag by using nanoindentation
20. Interface reaction and intermetallic compound growth behavior of Sn-Ag-Cu lead-free solder joints on different substrates in electronic packaging10.1007/s10853-018-2907-y ↗
21. Applications of Ni and Ag metallizations at the solder/Cu interfaces in advanced high-power automobile interconnects: an electromigration study10.1016/j.surfcoat.2024.130828 ↗
22. Recent advances on electromigration in very-large-scale-integration of interconnects10.1063/1.1611263 ↗
23. Solder/substrate interfacial reactions in the Sn-Cu-Ni interconnection system10.1007/s11664-006-0028-x ↗
24. Evolution of intermetallic compounds between Sn-0.3Ag-0.7Cu low-silver lead-free Solder and Cu substrate during thermal aging10.1016/S1005-0302(12)60023-1 ↗
25. Phase-field simulations of intermetallic compound evolution in Cu/Sn solder joints under electromigration10.1016/j.actamat.2013.08.016 ↗
26. Growth behavior and formation mechanism of porous Cu3Sn in Cu/Sn solder system10.1016/j.matchar.2021.111271 ↗
27. Fast prediction of electromigration lifetime with modified mean-time-to-failure equation10.1016/j.matlet.2022.132880 ↗
28. Reliability challenges for copper interconnects10.1016/j.microrel.2003.11.004 ↗
29. Electromigration reliability issues in dual-damascene Cu interconnections10.1109/TR.2002.804737 ↗
30. Effect of Au/Pd bilayer metallization on solder/Cu interfacial reaction and growth kinetics of Cu-Sn intermetallic compounds during solid-state aging10.1016/j.surfcoat.2017.03.033 ↗
31. Void growth modeling upon electromigration stressing in narrow copper lines
32. Effect of Joule heating and current crowding on electromigration in mobile technology10.1063/1.4974168 ↗
33. Current-crowding-induced electromigration failure in flip chip solder joints10.1063/1.1432443 ↗
34. The amorphous interphase formed in an intermetallic-free Cu/Sn couple during early stage electromigration10.1016/j.scriptamat.2018.06.024 ↗
35. An assessment of electromigration in 2.5 D packaging
36. Characteristics of current crowding in flip-chip solder bumps10.1016/j.microrel.2005.02.007 ↗
37. Kinetic study of intermetallic growth and its reliability implications in Pb-free Sn-based microbumps in 3D integration
38. Electro-work hardening of metals induced by the athermal electromigration effect10.1016/j.msea.2019.138689 ↗
39. Electromigration enhanced intermetallic growth and void formation in Pb-free solder joints10.1063/1.2359135 ↗
40. Diffusion parameters and growth mechanism of phases in the Cu-Sn system10.1007/s11661-010-0592-9 ↗
41. Direct observation of void morphology in step-like electromigration resistance behavior and its correlation with critical current density10.1063/1.1340004 ↗
42. Diffusion barrier effects of transition metals for Cu/M/Si multilayers (M=Cr, Ti, Nb, Mo, Ta, W)10.1063/1.111875 ↗