The effect of non-ionic surfactants on the removal of cerium oxide particles in STI CMP post cleaning
Source abstract
Abstract
Ceria abrasives are widely used in shallow trench isolation (STI) chemical mechanical polishing (CMP) processes due to their ability to form Ce– O–Si bonds with SiO 2 . However, they are also extremely susceptible to absorbing on the wafer surface to form contaminants, which in turn affects the reliability and stability of the devices. Therefore, the removal of ceria particles in the post-CMP cleaning process is critical. In this study, ethylenediaminetetraacetic acid (EDTA) was used as the main component of the alkaline cleaning solution to investigate the effect of nonionic surfactants containing different hydrophilic and hydrophobic groups on particle removal. The wettability and spreading rate of the three cleaning solutions were observed and compared using surface tension tester and laser confocal microscope. Then, the cleaning effect of the nonionic surfactants on ceria particles was assessed by scanning electron microscopy (SEM) and atomic force microscopy (AFM), while quantum chemical calculation and molecular dynamics simulations were used to reveal the cleaning mechanism of the three nonionic surfactants. The results show that the cleaning solution with 2000 ppm JFCE and 0.15 wt% EDTA at pH 11, combined with the mechanical action of PVA brush, can remove 99.9% of ceria particles from the SiO 2 surface.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Minerals Flotation and Separation Techniques · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Effect of lanthanum doping in ceria abrasives on chemical mechanical polishing selectivity for shallow trench isolation10.1016/j.mssp.2015.01.049 ↗
2. Shallow Trench isolation chemical mechanical planarization: a review10.1149/2.0071511jss ↗
3. A study of the colloidal stability of mixed abrasive slurries and their role in CMP10.1149/2.jes113470 ↗
4. Shallow trench isolation chemical mechanical planarization: a Review10.1149/2.0071511jss ↗
5. Effect of organic additives on ceria slurry in shallow trench isolation chemical mechanical planarization10.1143/JJAP.44.5949 ↗
6. Effect of lanthanum doping in ceria abrasives on chemical mechanical polishing selectivity for shallow trench isolation10.1016/j.mssp.2015.01.049 ↗
7. Enhanced open innovation: CMP innovation to open new paradigm10.1149/2.0161905jss ↗
8. Interfacial reactivity between ceria and silicon dioxide and silicon nitride surfaces: organic additive effects10.1149/1.1951203 ↗
9. The pH-dependant attachment of ceria nanoparticles to silica using surface analytical techniques10.1016/j.apsusc.2015.03.170 ↗
10. Wan · 2022 · 1
11. Effects of abrasive particle size and molecular weight of poly (acrylic acid) in ceria slurry on removal selectivity of SiO2/Si3N4 films in shallow trench isolation chemical mechanical planarization10.1557/jmr.2007.0097 ↗
12. Post cleaning for FEOL CMP with silica and ceria slurries10.1149/2.0101710jss ↗
13. Direct and quantitative study of ceria–SiO2 interaction depending on Ce3+ concentration for chemical mechanical planarization (CMP) cleaning10.1016/j.mssp.2020.105500 ↗
14. Increase in Ce3+Concentration of ceria nanoparticles for high removal rate of SiO2in chemical mechanical planarization10.1149/2.0371709jss ↗
15. Investigation into the effect of CMP slurry chemicals on ceria abrasive oxidation state using XPS10.1149/2.0311910jss ↗
16. Impact of wafer transfer process on STI CMP scratches[C]
17. Highly selective chemical mechanical polishing of Si3N4 over SiO2 using advanced silica abrasive[J]10.7567/JJAP.56.056501 ↗
18. Trace metals optimization in ceria abrasive for material removal rate enhancement during ILD CMP10.1149/2.0241709jss ↗
19. Almost complete removal of ceria particles down to 10 nm size from silicon dioxide surfaces10.1149/2.0131805jss ↗
20. Removal of nanoceria abrasive particles by using diluted SC1 and non-ionic surfactant10.1149/2162-8777/abedd2 ↗
21. Cleaning solutions for removal of ∼30 nm ceria particles from proline and citric acid containing slurries deposited on silicon dioxide and silicon nitride surfaces10.1149/2162-8777/ab8ffa ↗
22. Development of a novel wet cleaning solution for Post-CMP SiO2 and Si3N4 films10.1016/j.mssp.2021.106353 ↗
23. Effect of complexing agent on ceria particle removal in post-STI CMP cleaning process10.1016/j.colsurfa.2022.130668 ↗
24. The micellar and thermophysical studies of a surfactant, sodium dodecyl sulfate with a hydrotrope, 3-Nitrobenzene sulfonic acid sodium salt10.1016/j.molliq.2020.113815 ↗
25. Synthesis of novel gemini surfactants based on succinic acid and their application as inhibitors for carbon steel corrosion10.1007/s40735-020-00425-z ↗
26. In silico prediction of critical micelle concentration (cmc) of classic and extended anionic surfactants from their molecular structural descriptors10.1007/s13369-020-04598-0 ↗
27. Striking a balance: role of supramolecular assemblies on the modulation of the chemical and mechanical contributions during Post-STI CMP cleaning10.1016/j.matchemphys.2020.124170 ↗
28. Particle removal by surfactants during semiconductor cleaning10.1016/B978-0-12-822216-4.00001-X ↗
29. Study on particle removal during the Co post-CMP cleaning process10.1016/j.colsurfa.2021.127189 ↗
30. Sun · Experimental validation and molecular dynamics simulation of removal of PO residue on Co surface by alkaline cleaning solution with different functional groups[J] · 2021 · 610
31. Multidimensional insights involving electrochemical and in silico investigation into the corrosion inhibition of newly synthesized pyrazolotriazole derivatives on carbon steel in a HCl solution10.1039/C9RA05881H ↗
32. Theoretical insight into an empirical rule about organic corrosion inhibitors containing nitrogen, oxygen, and sulfur atoms10.1016/j.apsusc.2017.02.134 ↗
33. Multidimensional insights into the corrosion inhibition of 3, 3-dithiodipropionic acid on Q235 steel in H2SO4 medium: a combined experimental and in silico investigation10.1016/j.jcis.2020.03.001 ↗
34. Highly functionalized epoxy macromolecule as an anti-corrosive material for carbon steel: computational (DFT, MDS), surface (SEM-EDS) and electrochemical (OCP, PDP, EIS) studies10.1016/j.molliq.2020.112535 ↗
35. The spectroscopic (FT-IR, UV–vis), Fukui function, NLO, NBO, NPA and tautomerism effect analysis of (E)-2-[(2-hydroxy-6-methoxybenzylidene) amino] benzonitrile10.1016/j.saa.2014.11.078 ↗
36. Spectroscopic, quantum chemical studies, Fukui functions, in vitro antiviral activity and molecular docking of 5-chloro-N-(3-nitrophenyl) pyrazine-2-carboxamide10.1016/j.molstruc.2016.04.088 ↗