Recent challenges, advancements, and effects of nanoparticles on the low-temperature Sn-Bi solder alloys
Source abstract
Abstract
There has been a notable increase in the use of solder connections within the advanced packaging industry. Recently, the application of the most used eutectic lead (Pb) based alloy has been restricted due to the high toxicity of Pb. This stimulated the researchers mind to develop “Pb-free” solder alloys that should compete with the benchmark properties already set by Pb-based alloys. Sn-Bi alloy has proven its potential as a low-temperature solder in microelectronics. Despite being superior in melting point, it has some obstacles that question its durability and reliability. This review provides a detailed overview of the properties, recent trends, and ongoing research activities revolving around the Sn-Bi solder. It highlights novel ideas and methodologies to utilize reinforcements such as metal nanoparticles (Nps), rare earth elements (REEs), ceramic Nps, etc. These additives are prone to enhance mechanical properties, control interfacial reactions, and refine microstructures. The insightful discussion about the strategies to reduce Bi-rich phase coarsening and improve ductility with detailed analysis of solder-substrate interaction, and intermetallic compounds (IMCs) formation paves the way for upcoming researchers. Furthermore, this review differentiates the critical gaps in the current articles, including a limited understanding of long-term reliability under mechanical and thermal stress. We believe that the highlighted comprehensive resources will be helpful for researchers working to optimize Sn-Bi alloys for advanced packaging technologies. The insights presented aim to facilitate the development of next-generation low-temperature solders that meet the rigorous demands of modern electronics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Lead-free solders in microelectronics10.1016/S0927-796X(00)00010-3 ↗
2. Tin–lead (SnPb) solder reaction in flip chip technology10.1016/S0927-796X(01)00029-8 ↗
3. Materials modification of the lead-free solders incorporated with micro/nano-sized particles: a review10.1016/j.matdes.2020.109224 ↗
4. Investigation of interfacial behavior in miniaturized solder interconnects10.1016/j.msea.2016.07.060 ↗
5. Effect of electric current stressing on mechanical performance of solders and solder joints: a review10.1007/s10853-022-07715-6 ↗
6. Exploring ultrathin tungsten disulfide as a diffusion barrier for copper interconnects: advanced packaging reliability and a first-principles study10.1016/j.mtnano.2025.100631 ↗
7. Low melting point solders based on Sn, Bi, and in elements
8. Effect of trace boron nitride nanoparticles on the microstructure and shear properties of Sn58Bi solder joint10.1007/s11665-023-08607-9 ↗
9. Sn–bi–ag solder enriched with Ta2O5 nanoparticles for flexible Mini-LED microelectronic packaging10.1021/acsanm.3c04209 ↗
10. 5G and packaging technology, recent progress/status and items to be considered10.5104/jiep.22.596 ↗
11. Low melting temperature Sn-Bi solder: effect of alloying and nanoparticle addition on the microstructural, thermal, interfacial bonding, and mechanical characteristics10.3390/met11020364 ↗
12. Influence of stiffener design on co-packaged optics (CPO) 2.5 D heterogeneous packages
13. Bond-line thickness prediction for thermal interface material under usage conditions
14. Effect of Ag nanopowders on microstructure, hardness and elastic modulus of Sn-Bi solder
15. A review of mechanical properties of lead-free solders for electronic packaging10.1007/s10853-008-3125-9 ↗
16. Interfacial reactions and mechanical properties of Sn–58Bi solder joints with Ag nanoparticles prepared using ultra-fast laser bonding10.3390/ma14020335 ↗
17. Structure and properties of lead-free solders bearing micro and nano particles10.1016/j.mser.2014.06.001 ↗
18. Mechanical properties of Pb-free SnAg solder joints10.1016/j.actamat.2011.01.012 ↗
19. Evaluation of bulk mechanical properties of selected lead-free solders in tension and in shear10.1007/s11665-013-0513-3 ↗
20. A review: on the development of low melting temperature Pb-free solders10.1016/j.microrel.2014.02.025 ↗
21. A technical review on state of the art In-Plane and out-of-plane deformation measurement techniques for microelectronic packages
22. Influence of La2O3 nanoparticle additions on microstructure, wetting, and tensile characteristics of sn–ag–cu alloy10.1016/j.matdes.2015.07.137 ↗
23. Effects of minor additions of Zn on interfacial reactions of sn-ag-cu and Sn-Cu solders with various Cu substrates during thermal aging10.1007/s11664-007-0254-x ↗
24. High-reliability low-ag-content sn-ag-cu solder joints for electronics applications10.1007/s11664-012-2145-z ↗
25. Intermetallic compound growth suppression at high temperature in SAC solders with Zn addition on Cu and Ni–P substrates10.1016/j.jallcom.2011.09.024 ↗
26. Thermomechanical behaviour of environmentally benign Pb-free solders10.1179/174328009X461069 ↗
27. Properties of solders with low melting point10.1016/j.jallcom.2007.03.062 ↗
28. Development of alternatives to lead-bearing solders
29. Abbaschian · 1973 · vol. 17
30. Six cases of reliability study of Pb-free solder joints in electronic packaging technology10.1016/S0927-796X(02)00007-4 ↗
31. Mechanical properties of Sn–Zn lead-free solder alloys based on the microstructure array10.1016/j.matchar.2009.11.012 ↗
32. Comparison of electroplated eutectic Bi/Sn and Pb/Sn solder bumps on various UBM systems, electron packag
33. Influence of copper pad dimension on thermal fatigue life performance of BGA packages10.1109/TCPMT.2023.3305935 ↗
34. Eutectic Sn-Bi as an alternative to Pb-free solders
35. Effect of low bi content on reliability of Sn-Bi alloy joints before and after thermal aging10.1007/s11837-021-05146-3 ↗
36. Bi-induced voids at the Cu3Sn/Cu interface in eutectic SnBi/Cu solder joints10.1016/j.scriptamat.2007.10.025 ↗
37. Effect of silver (ag) nanoparticle size on the microstructure and mechanical properties of Sn58Bi–Ag composite solders10.1016/j.jallcom.2015.05.023 ↗
38. Microstructure and reliability of Mo nanoparticle reinforced Sn–58Bi-based lead-free solder joints10.1080/02670836.2017.1415791 ↗
39. Influences of Ag and in alloying on Sn-Bi eutectic solder and SnBi/Cu solder joints10.1007/s10854-019-02206-y ↗
40. Effects of Ti addition on the microstructure, mechanical properties and electrical resistivity of eutectic Sn58Bi alloy10.1016/j.msea.2018.12.012 ↗
41. Effect of antimony additions on corrosion and mechanical properties of Sn-Bi eutectic lead-free solder alloy
42. The current status of lead-free solder alloys10.1109/6104.980031 ↗
43. Effects of alloying element on mechanical properties of Sn-Bi solder alloys: a review10.1108/SSMT-06-2021-0035 ↗
44. Recent progress on the development of Sn–Bi based low-temperature Pb-free solders10.1007/s10854-019-00701-w ↗
45. Interfacial microstructure and mechanical reliability of Sn-58Bi/ENEPIG solder joints10.3390/pr10020295 ↗
46. K. N. Subramanian, C. E. Ho, S. C. Yang, C. R. Kao, Interfacial reaction issues for lead-free electronic solders, J. Mater. Sci. Mater. Electron. 18(1–3) 155-174, https://doi.org/10.1007/978-0-387-48433-4_10. .10.1007/s10854-006-9031-5 ↗
47. Morphology and growth of intermetallics at the interface of Sn-based solders and Cu with different surface finishes10.1007/s11664-008-0582-5 ↗
48. A study on parameters that impact the thermal fatigue life of BGA solder joints
49. Oxidation behavior of ENIG and ENEPIG surface finish
50. Review of capabilities of the ENEPIG surface finish10.1007/s11664-014-3322-z ↗
51. Evaluation of the bondability of the epoxy-enhanced Sn-58Bi solder with ENIG and ENEPIG surface finishes10.1007/s11664-015-4024-x ↗
52. Interfacial reaction and mechanical properties between low melting temperature Sn–58Bi solder and various surface finishes during reflow reactions10.1007/s10854-014-2589-4 ↗
53. The evolution of organic solderability preservatives (OSP) from a temporary protectant to a leadership position in surface finishing chemistry10.1108/03056121111128279 ↗
54. The evolution of organic solderability preservative (OSP) process in PCB application
55. Copper corrosion inhibitors. A review10.1016/S1452-3981(23)15441-1 ↗
56. Mechanical reliability of the epoxy Sn-58wt.% Bi solder joints with different surface finishes under thermal shock10.1007/s11664-018-6224-7 ↗
57. Effect of surface finish on the shear properties of SnAgCu-based solder alloys10.1109/TCPMT.2019.2928267 ↗
58. Comparative study of ENIG and ENEPIG as surface finishes for a sn-ag-cu solder joint10.1007/s11664-011-1686-x ↗
59. Packaging reliability effect of ENIG and ENEPIG surface finishes in board level thermal test under long-term aging and cycling10.3390/ma10050451 ↗
60. TEM observation of interfacial compounds of SnAgCu/ENIG solder bump after laser soldering and subsequent hot air reflows10.1016/j.matlet.2015.10.108 ↗
61. Relationship between controllable process parameters on bump height in ENIG10.4028/www.scientific.net/AMM.404.62 ↗
62. Evaluation of new substrate surface finish: electroless nickel/electroless palladium/immersion gold (ENEPIG)
63. Is electroless nickel/electroless palladium/immersion gold (ENEPIG) the solution of lead free soldering on PCB and IC packaging applications?
64. Consider gold-based finishes, which produce a reliable solder joint, as an alternate source for printed circuitry10.1016/S0026-0576(06)80028-0 ↗
65. Mechanical property of the epoxy-contained Sn–58Bi solder with OSP surface finish10.1016/j.jallcom.2014.01.078 ↗
66. Electromigration behaviors of Sn58% Bi solder containing Ag-coated MWCNTs with OSP surface finished PCB10.1016/j.jallcom.2018.10.028 ↗
67. Study on the reliability of Sn–Bi composite solder pastes with thermosetting epoxy under thermal cycling and humidity treatment10.3390/cryst11070733 ↗
68. Electromigration effect on Sn-58% Bi solder joints with various substrate metallizations under current stress10.1007/s10854-015-3858-6 ↗
69. Board level drop reliability of epoxy-containing Sn-58 mass% Bi solder joints with various surface finishes10.2320/matertrans.M2015260 ↗
70. Drop reliability of epoxy-contained Sn-58 wt.% Bi solder joint with ENIG and ENEPIG surface finish under temperature and humidity test10.1007/s11664-016-4517-2 ↗
71. Wetting transition of grain boundaries in the Sn-rich part of the Sn–Bi phase diagram10.1007/s10853-010-4961-y ↗
72. Interfacial reaction and mechanical properties of Sn-Bi solder joints10.3390/ma10080920 ↗
73. Characterization of eutectic Sn-Bi solder joints10.1007/BF02655427 ↗
74. Brown · 2001
75. Effects of minor Cu and Zn additions on the thermal, microstructure and tensile properties of Sn–bi-Based solder alloys10.1016/j.jallcom.2014.06.015 ↗
76. Investigation of interfacial reactions between Sn–5Bi solder and Cu substrate10.1016/S0925-8388(03)00291-3 ↗
77. Interfacial reactions between lead-free solders and common base materials10.1016/j.mser.2005.03.001 ↗
78. Modeling the solid-state reaction between Sn-Pb solder and a porous substrate coating10.1007/s11664-998-0067-6 ↗
79. Intermetallic compound layer growth by solid state reactions between 58Bi-42Sn solder and copper10.1007/BF02655468 ↗
80. A review on the effect of surface finish and cooling rate on solder joint reliability, high perf
81. The amorphous origin and the nucleation of intermetallic compounds formed at the interface during the soldering of Sn–3.0 Ag–0.5 Cu on a Cu substrate10.1063/1.2973148 ↗
82. Initial formation of CuSn intermetallic compounds between molten SnAgCu solder and Cu substrate10.1016/j.scriptamat.2008.10.029 ↗
83. Effect of trace Al on growth rates of intermetallic compound layers between Sn-based solders and Cu substrate10.1016/j.jallcom.2012.08.023 ↗
84. Influence of nanoparticle addition on the formation and growth of intermetallic compounds (IMCs) in cu/sn–ag–cu/cu solder joint during different thermal conditions
85. Effect of Si3N4 nanoparticles on IMC as well as mechanical properties of Sn58Bi/Cu solder joints during thermal aging10.1016/j.jmrt.2024.06.003 ↗
86. Influence of Fe and Ho additions on Sn-3.0 Ag-0.5 Cu solder alloy: microstructure, electrochemical and mechanical properties10.1016/j.matchar.2023.113307 ↗
87. Intermetallic compound growth behavior and mechanical performance in Sn58Bi/Cu solder joint bearing Mg particles incorporation during thermal aging10.1016/j.matchar.2023.113618 ↗
88. Enhancement of SAC105 solder for vacuum soldering with Cu substrates through incorporation of activated Ti nanoparticles10.1016/j.jmrt.2023.11.265 ↗
89. The mechanisms of diffusion in metals and alloys10.1016/0022-5088(72)90135-X ↗
90. Bismuth segregation enhances intermetallic compound growth in SnBi/Cu microelectronic interconnect10.1016/j.jallcom.2010.10.040 ↗
91. Anisotropic thermal expansion of Ni3Sn4, Ag3Sn, Cu3Sn, Cu6Sn5 and βSn10.1016/j.intermet.2017.08.002 ↗
92. Structural, electronic and thermo-elastic properties of Cu6Sn5 and Cu5Zn8 intermetallic compounds: first-Principles investigation10.1016/j.intermet.2009.12.032 ↗
93. The status of rapid solidification of alloys in research and application10.1007/BF01120015 ↗
94. Impact of precipitated phases on the microstructure and mechanical properties of eutectic Sn58Bi alloy10.1016/j.jallcom.2022.163882 ↗
95. Development of low-silver content SAC0307 solder alloy with Al2O3 nanoparticles10.1016/j.msea.2020.139439 ↗
96. Influence of Ni nanoparticle on the morphology and growth of interfacial intermetallic compounds between Sn–3.8 Ag–0.7 Cu lead-free solder and copper substrate10.1016/j.intermet.2012.09.016 ↗
97. Effect of nanoparticles addition on the microstructure and properties of lead-free solders: a review10.3390/app9102044 ↗
98. Effects of Ni nanoparticles addition on the microstructure, electrical and mechanical properties of sn-ag-cu alloy10.1016/j.mtla.2019.100234 ↗
99. Silver nanoparticles effect on the wettability of sn-ag-cu solder pastes and solder joints microstructure on copper10.1108/09540911111146908 ↗
100. A study of nanoparticles in Sn–Ag based lead free solders10.1016/j.microrel.2007.05.004 ↗