A review of the electric measurements and their failure criteria for solder joint degradation
Source abstract
Abstract
The assessment of solder joint quality and reliability in electronic devices has an important role in many industries and guarantees challenges for reliability engineers. This article explores various methods for the electrical measurement of solder joints, focusing on resistance measurement, impedance measurement, and thermal resistance measurement. Based on the presented articles, impedance measurement emerges as the most effective method, although its complexity can limit its profitability. Resistance measurement, while approaching the accuracy of impedance measurement, is more widely used due to its simplicity. Thermal resistance measurement, although complicated, provides less precise results compared to the other methods. Various standards define failure based on similar criteria, with IPC-9701B offering the latest and best-defined criteria for data logger measurements. It is suggested that future literature adopt this evaluation method to enhance the comparability of different measurement results for solder joint failure. The relationship between crack length and electrical properties is crucial for detecting and predicting potential failures in solder joints. Establishing a clear connection between crack length and electrical properties can lead to more rational failure criteria, reducing the likelihood of overdesigning solder joints.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Integrated Circuits and Semiconductor Failure Analysis · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Electronic system reliability: collating prediction models10.1109/TDMR.2006.876570 ↗
2. Solder joint reliability performance study and shear characterization of low-Ag SAC lead-free solders for handheld application10.1016/j.mssp.2024.108489 ↗
3. Solder joint fatigue models: review and applicability to chip scale packages10.1016/S0026-2714(99)00061-X ↗
4. Analyzing the overfitting of boosted decision trees for the modelling of stencil printing10.3311/PPee.19274 ↗
5. A review on thermal cycling and drop impact reliability of SAC solder joint in portable electronic products10.1016/j.microrel.2011.07.093 ↗
6. Effect of intermetallic compounds on the thermal fatigue of surface mount solder joints10.1109/96.554534 ↗
7. Effect of La on the Cu–Sn intermetallic compound (IMC) growth and solder joint reliability10.1016/S0925-8388(01)01747-9 ↗
8. Thermal cycling aging effects on Sn–Ag–Cu solder joint microstructure, IMC and strength
9. Solder fatigue life modeling of QFN components based on design of experiments10.1016/j.microrel.2023.115297 ↗
10. Effect of thermal aging on the interfacial structure of SnAgCu solder joints on Cu10.1016/j.microrel.2006.12.006 ↗
11. Formation and growth of interfacial intermetallic layers in eutectic Sn-Ag solder and its composite solder joints10.1023/A:1008968518512 ↗
12. Orientation imaging studies of Sn-based electronic solder joints10.1557/JMR.2002.0337 ↗
13. The creep properties of lead-free solder joints10.1007/BF02701846 ↗
14. Creep of thermally aged SnAgCu-solder joints10.1016/j.microrel.2006.09.006 ↗
15. Failures in electronic assemblies and devices
16. Effect of PCB cracks on thermal cycling reliability of passive microelectronic components with single-grained solder joints10.1016/j.microrel.2019.01.006 ↗
17. Effect of different temperature cycle profiles on the crack propagation and microstructural evolution of lead free solder joints of different electronic components
18. Aging impact on the accelerated thermal cycling performance of lead-free BGA solder joints in various stress conditions
19. Pecht · 2018
20. Mechanistic understanding of microstructural effects on the thermal fatigue resistance of solder joints10.1016/j.jmps.2024.105623 ↗
21. State of the art of lead-free solder joint reliability10.1115/1.4048037 ↗
22. Effects of thermomechanical cycling on lead and lead-free (SnPb and SnAgCu) surface mount solder joints10.1016/S0026-2714(01)00087-7 ↗
23. Damage behavior of SnAgCu/Cu solder joints subjected to thermomechanical cycling10.1016/j.jallcom.2013.05.026 ↗
24. Damage produced in model solder (Sn-37Pb) joints during thermomechanical cycling10.1007/s11664-003-0222-z ↗
25. An overview of non-destructive testing methods for integrated circuit packaging inspection10.3390/s18071981 ↗
26. Using X-ray imaging for the study of crack development in solder reliability testing10.1016/j.microrel.2023.115079 ↗
27. Defect inspection of flip chip solder joints based on non-destructive methods: a review10.1016/j.microrel.2020.113657 ↗
28. Non-destructive crack and defect detection in SAC solder interconnects using cross-sectioning and X-ray micro-CT
29. A study on the electrical resistance of solder joint interconnections10.1016/S0167-9317(02)00551-8 ↗
30. Board level reliability assessment of chip scale packages10.1016/S0026-2714(99)00057-8 ↗
31. Li Wetz, J. White, B. Keser, Improvement in WL-CSP reliability by wafer thinning, in: 53rd Electron. Components Technol. Conf. 2003. Proceedings., IEEE, n.d.: pp. 853–856. https://doi.org/10.1109/ECTC.2003.1216390.10.1109/ECTC.2003.1216390 ↗
32. Analysis of solder joint failure criteria and measurement techniques in the qualification of electronic products, IEEE trans. Components packag
33. IPC guidelines for accelerated reliability testing of surface mount solder attachments, IPC-SM-785, the institute for interconnecting and packaging electronic circuits
34. Comparison of in-situ measurement techniques of solder joint reliability under thermo-mechanical stresses10.1016/j.microrel.2014.07.112 ↗
35. Solder-joint quantitative crack analysis—ohmic resistance approach10.1109/TCPMT.2012.2188894 ↗
36. Keithley, Application Note Series Understanding Low Voltage, Appl. Note 1132 (n.d.).
37. Early detection of interconnect degradation by continuous monitoring of RF impedance10.1109/TDMR.2009.2020170 ↗
38. Fretz · 2009 · 7511
39. Resistivity and temperature coefficient of resistivity of tin films10.1007/BF00540864 ↗
40. The study of temperature coefficient of resistivity of polycrystalline metal films10.1007/BF01111888 ↗
41. Low temperature coefficient of resistivity Ag–Cd and Ag–Sn alloys—structure and transport10.1016/j.mseb.2003.10.012 ↗
42. Effect of temperature on the electrical conduction and dielectric behavior of solder10.1007/s10854-021-05369-9 ↗
43. Keithley · 2016
44. Lead/lead free solder joints comparative electrical tests as function of microstructure and soldering thermal profile
45. A comparative study of silver-epoxy and tin-lead solder in their joints with copper, through mechanical and electrical measurements during debonding10.1023/A:1004445320025 ↗
46. Ulrich · 2006
47. Reliability testing of solder joints under combined cyclic thermal and bending load for automotive applications10.1016/j.microrel.2022.114751 ↗
48. Dielectric properties of soils at UHF and microwave frequencies10.1029/JB079i011p01699 ↗
49. Lihong Cao, H.B. Chong, J.M. Chin, R.N. Master, Non-destructive analysis on flip chip package with TDR (time domain reflectometry) and SQUID (superconducting quantum interference device), in: 4th Electron. Packag. Technol. Conf. 2002., IEEE, n.d.: pp. 50–55. https://doi.org/10.1109/EPTC.2002.1185596.10.1109/EPTC.2002.1185596 ↗
50. Flip-chip package soft failure analysis and case studies using time domain reflectometry
51. Thierauf · 2017
52. Detection of solder joint degradation using RF impedance analysis
53. Remaining-life prediction of solder joints using RF impedance analysis and Gaussian process regression10.1109/TCPMT.2015.2477098 ↗
54. A model-based prognostic approach to predict interconnect failure using impedance analysis10.1007/s12206-016-0910-2 ↗
55. Reliability monitoring of a separable land grid array using time domain reflectometry
56. An alternative approach to junction-to-case thermal resistance measurements, Electron. Cool
57. Assessing thermal resistance as a degradation metric for solder bump arrays in discrete SiC MOSFET packages10.1016/j.microrel.2024.115388 ↗
58. Transient measurement of the junction-to-case thermal resistance using structure functions: chances and limits
59. A quick electrical inspection method of solder joint quality for LED products10.1088/0957-0233/27/6/065005 ↗
60. On the representation of infinite-length distributed RC one-ports10.1109/31.135743 ↗
61. Identification of RC networks by deconvolution: chances and limits10.1109/81.662698 ↗
62. Reliability analysis and condition monitoring of SAC+ solder joints under high thermomechanical stress conditions using neuronal networks10.1016/j.microrel.2021.114461 ↗
63. Transient thermal analysis as a highly sensitive test method for the reliability investigation of high power LEDs during temperature cycle tests10.4071/imaps.407 ↗
64. Transient thermal analysis as in-situ method in accelerated stress tests to access package integrity of LEDs
65. Reliability and failure analysis of solder joints in flip chip LEDs via thermal impedance characterisation10.1016/j.microrel.2017.07.052 ↗
66. Patel · 2000
67. T. Burnette, Z. Johnson, T. Koschmieder, W. Oyler, Underfilled BGAs for a variety of plastic BGA package types and the impact on board-level reliability, in: 2001 Proceedings. 51st Electron. Components Technol. Conf. (Cat. No.01CH37220), IEEE, n.d.: pp. 1045–1051. https://doi.org/10.1109/ECTC.2001.927944.10.1109/ECTC.2001.927944 ↗
68. 2022
69. 2004
70. 2016
71. Henshall · 2009 · vol. 105
72. A study of solder joint failure criteria
73. Nondestructive quantitative analysis of crack propagation in solder joints10.1109/TCPMT.2013.2238673 ↗
74. In-situ diagnosis of solder joint failure by means of thermal resistance measurement10.1016/j.microrel.2021.114232 ↗