Localized surface roughening to improve adhesion of electroless seed layer in through-glass vias
Source abstract
Abstract
This article reports the improvement of the adhesion of the electroless seed layer deposited on glass substrates used in creating through-glass vias (TGV) by localized surface roughening. Four glass substrates having varying roughness characteristics were prepared by electrochemical discharge machining (ECDM) and ultrasonic machining (USM). The electroless nickel seed layer was deposited directly on glass without any adhesion layer, followed by electrodeposited copper layers. In-depth surface topography and morphology analysis reveal the mechanism behind the improved adhesion during standard peel and cross-hatch adhesion tests, which were used to determine the interlayer adhesion. Localized roughening techniques generated specific microfeatures, i.e., microgrooves (in USM) or ridges (in ECDM), increasing the surface area. These features acted as interlocking/nucleation sites to hold the electroless nickel atoms, resulting in higher interfacial adhesion. USM-roughened samples exhibited stronger interfacial adhesion than their ECDM-roughened counterparts, which indicated that the interlayer adhesion depends on topography and the roughened surface`s morphology. The surface with negative skewness and positive excess kurtosis promotes mechanical interlocking, offering a promising strategy for enhancing interlayer adhesion. Finally, conformal deposition in a 6 × 6 array of through-holes having an aspect ratio of ∼4 was also demonstrated.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A review of 5G front-end systems package integration10.1109/TCPMT.2020.3041412 ↗
2. Modeling of machining of EB-PVD ceramic coatings using smoothed particle hydrodynamics method10.1016/j.jmapro.2022.07.012 ↗
3. Electroless copper deposition: a critical review10.1016/j.tsf.2018.11.016 ↗
4. Investigations on metallization in FDM build ABS part using electroless deposition method10.1016/j.jmapro.2015.03.002 ↗
5. Sustainable direct metallization of 3D-printed metal-infused polymer parts: a novel green approach to direct copper electroless plating10.1007/s40436-024-00486-0 ↗
6. Continuous electroless seed layer deposition in through-glass-vias by ultrasonic agitation10.1109/TCPMT.2024.3419836 ↗
7. Wear characteristics of electroless NiP/bio-composite coatings on En8 steel10.1016/j.jmapro.2015.08.002 ↗
8. Effect of micro-texture on substrate surface on adhesion performance of electroless Ni–P coating10.1016/j.jmapro.2021.12.025 ↗
9. A critical review of copper electroless deposition on glass substrates for microsystems packaging applications10.1080/02670844.2022.2142002 ↗
10. Adhesion mechanism of electroless copper film formed on CeramicSubstrates using ZnO thin film as an intermediate layer10.1149/1.1838500 ↗
11. Electroless plating of copper on surface-modified glass substrate10.1016/j.apsusc.2011.04.100 ↗
12. Electrochemical copper metallization of glass substrates mediated by solution-phase deposition of adhesion-promoting layers10.1149/2.1071514jes ↗
13. Copper plating on glass using a solution processed copper-titanium oxide catalytic adhesion layer10.1149/2.0071606jes ↗
14. Ultrasonic-assisted surface roughening of glass substrate to improve adhesion of electroless nickel seed layer in microsystems packaging10.1016/j.matlet.2022.132033 ↗
15. Formation of high aspect ratio through-glass vias by the combination of Ultrasonic micromachining and copper electroplating10.1016/j.jmapro.2022.08.030 ↗
16. Investigations into velocity decay, initial tool-workpiece gap, and material removal behaviour in ultrasonic micromachining10.1016/j.jmapro.2024.05.080 ↗
17. Effect of tool-electrode material in through-hole formation using ECDM process10.1080/10426914.2021.1885700 ↗
18. Fabrication of high-aspect-ratio microgrooves using an electrochemical discharge micromilling process10.1088/1361-6439/aa64b9 ↗
19. Micro-electrochemical discharge cutting of glass using a surface-textured tool10.1016/j.cirpj.2011.06.007 ↗
20. Manufacturing of anti-fogging super-hydrophilic microstructures on glass by nanosecond laser10.1016/j.jmapro.2020.10.011 ↗
21. Advances in laser assisted machining of hard and brittle materials10.1016/j.jmapro.2020.08.034 ↗
22. Excimer laser machining of microvias in glass substrates for the manufacture of high-density interconnects10.1007/s00340-012-5106-6 ↗
23. Improving copper plating adhesion on glass using laser machining techniques and areal surface texture parameters10.1016/j.optlaseng.2015.06.004 ↗
24. Surface integrity of holes machined by electrochemical discharge drilling method10.1016/j.cirpj.2020.09.004 ↗
25. Multi-response optimization and effect of tool rotation on micromachining of PMMA using an in-house developed μ-ECDM system10.1016/j.cirpj.2022.05.020 ↗
26. Effect of machining parameters on edge-chipping during drilling of glass using grinding-aided electrochemical discharge machining (G-ECDM)10.1007/s40436-017-0194-5 ↗
27. Generation of microholes on GFRP composite using ES-μ-ECDM system10.1016/j.cirpj.2022.06.015 ↗
28. Investigations into surface topography of glass microfeatures formed by pulsed electrochemical discharge milling for microsystem applications10.1007/s00542-020-04770-4 ↗
29. Fabrication of multiple through-holes in non-conductive materials by electrochemical discharge machining for RF MEMS packaging10.1016/j.jmatprotec.2019.04.032 ↗
30. Fabrication of deep microfeatures in glass substrate using electrochemical discharge machining for biomedical and microfluidic applications
31. Fabrication of Through-glass Vias (TGV) based 3D microstructures in glass substrate by a lithography-free process for MEMS applications10.1016/j.apsusc.2022.152494 ↗
32. Facilitating electroless metalization of blind holes in glass substrates by electrochemical discharge-assisted surface roughening10.1016/j.matlet.2023.135853 ↗
33. Ultrasonic machining-a comprehensive review10.1080/10910344.2013.806093 ↗
34. On the mechanism and mechanics of material removal in ultrasonic machining10.1016/j.ijmachtools.2015.05.006 ↗
35. Predictive modeling of material removal modes in micro ultrasonic machining10.1016/j.ijmachtools.2012.06.005 ↗
36. On machining of hard and brittle materials using rotary tool micro-ultrasonic drilling process10.1080/10426914.2019.1594255 ↗
37. Identifying adhesion characteristics of metal-polymer interfaces: recent advances in the case of electroplated acrylonitrile butadiene styrene