journal article·2024-06

Influence of SiO2–ZnO mixed soft abrasive on tribological behavior and polishing performance of sapphire wafer

Ziyuan Luo, Jiabin Lu, Qiusheng Yan, Da Hu, Yongze Zhou

Publisher page

Abstract

The use of reactive soft abrasives, capable of undergoing solid-state reactions with sapphire, is a promising approach for low-damage and low-contamination machining of sapphire wafers. This study calculates the Gibbs free energy change of these chemical reactions based on thermodynamic principles. SiO 2 –ZnO mixed soft abrasives were selected for the polishing of sapphire wafers. Friction and wear experiments were conducted to explore the tribological behavior of sapphire wafers with various mixed abrasives, leading to the optimization of the abrasive composition. The results show that mixed abrasives significantly enhance the material removal rate (MRR) of sapphire wafers. As the proportion of SiO 2 in the mixture increases, the MRR correspondingly rises. Specifically, an SiO 2–to–ZnO ratio of 2:1 in the mixed abrasives results in a 91.68% increase in MRR compared to using SiO 2 abrasives alone. Based on these findings, five grinding discs with different abrasive ratios were prepared using a resin binder for mechanical–chemical polishing experiments on sapphire wafers. The polishing results corroborate those of the friction and wear experiments, confirming that an increased SiO 2 content in the mixed abrasive discs leads to higher MRR. With a 2:1 ratio of SiO 2 to ZnO in the mixed abrasive disc, the MRR is enhanced by 342.9% compared to discs with only SiO 2 abrasives, while reducing the surface roughness to 3.21 nm. In the SiO 2–ZnO mixed abrasives, the inclusion of ZnO enhances chemical reactions during polishing. Aided by the mechanical removal efficacy of SiO 2, this approach significantly increases MRR while maintaining superior polishing quality.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Review of high temperature measurement technology based on sapphire optical fiber10.1016/j.measurement.2021.109868 ↗
2. Sapphire nanophotonics: fabrication challenges and optical properties, Micro
3. Thermoplasmonic laser-induced backside wet etching of sapphire10.1070/QEL16831 ↗
4. Effect of hydroxy carboxylates as complexing agent on improving chemical mechanical polishing performance of M-plane sapphire and action mechanism analysis10.1016/j.ceramint.2022.11.132 ↗
5. Green chemical mechanical polishing of sapphire wafers using a novel slurry10.1039/D0NR04705H ↗
6. The Research of reactivity between nano-abrasives and sapphire during polishing process10.1080/10584587.2015.1029839 ↗
7. Preparation of MgO doped colloidal SiO2 abrasive and their chemical mechanical polishing performance on c-, r- and a-plane sapphire substrate10.1016/j.ceramint.2018.05.087 ↗
8. Polishing performance and removal mechanism of core-shell structured diamond/SiO2 abrasives on sapphire wafer10.3390/mi13122160 ↗
9. Effect of ZnO-SiO2 composite abrasive on sapphire polishing performance and mechanism analysis10.1149/2162-8777/ac2910 ↗
10. Study on planarization machining of sapphire wafer with soft-hard mixed abrasive through mechanical chemical polishing10.1016/j.apsusc.2016.07.155 ↗
11. Synthesis of Sm-doped colloidal SiO2 composite abrasives and their chemical mechanical polishing performances on sapphire substrates
12. Novel polyelectrolyte–Al2O3/SiO2 composite nanoabrasives for improved chemical mechanical polishing (CMP) of sapphire10.1557/jmr.2018.443 ↗
13. Study on material removal mechanism of sapphire wafer with CeO2 coated diamond composite abrasives via green polishing10.1016/j.jmapro.2023.02.062 ↗
14. Sliding tribological properties of 0.45% carbon steel lubricated with Fe3O4 magnetic nano-particle additives in baseoil10.1016/j.wear.2013.01.027 ↗
15. Microstructure and mechanical behavior of MnO2/Pb nanocomposite10.1007/s11665-019-04052-9 ↗
16. Investigation of SiC single crystal polishing by combination of anodic oxidation and mechanical polishing10.20964/2020.05.66 ↗
17. Tribological properties of chemical composite and physical mixture of ZnO and SiO2 nanoparticles as grease additives
18. Hardness, toughness, and modulus of some common metamorphic minerals10.2138/am.2007.2212 ↗
19. Improving tribological behaviors of friction material by mullite10.1016/j.triboint.2015.09.039 ↗
20. Effect of ZnAl2O4 crystallization on ion-exchange properties in aluminosilicate glass, J. Alloy
21. High temperature friction and wear testing of silicon nitride ceramics10.1016/0301-679X(95)00020-5 ↗
22. SiO2/graphene composite for highly selective adsorption of Pb(II) ion10.1016/j.jcis.2011.12.023 ↗
23. Zinc aluminate (ZnAl2O4) by XPS10.1116/1.1247773 ↗
24. Effects of different dispersants on chemical reaction and material removal in ultrasonic assisted chemical mechanical polishing of sapphire10.1149/2162-8777/ac5a6d ↗
25. Surface-modification of SiO2 nanoparticles with oleic acid10.1016/S0169-4332(03)00259-9 ↗
26. Facile solution synthesis and characterization of porous cubic-shaped superstructure of ZnAl2O410.1016/j.matlet.2010.09.085 ↗
27. Research progress of material removal mechanism in plane lapping and polishing of hard-brittle materials
28. The polishing properties of magnetorheological-elastomer polishing pad based on the heterogeneous fenton reaction of single-crystal SiC10.1016/j.precisioneng.2022.09.006 ↗