journal article·2021-11

Investigation on the sawing temperature in ultrasonic vibration assisted diamond wire sawing monocrystalline silicon

Yan Wang, Li-Xing Song, Jian-Guo Liu, Rui Wang, Bo-Cheng Zhao

Publisher page

Abstract

Abstract In this paper, the effects of different sawing parameters (wire saw speed vs, feed rate vw, workpiece rotation speed nw) and ultrasonic vibration on the sawing temperature in diamond wire sawing monocrystalline silicon were studied. Firstly, the finite element model in diamond wire sawing monocrystalline silicon is established with respect to the thermal transient analysis in ANSYS. Then the influence of different sawing parameters and ultrasonic vibration on the sawing temperature during the sawing process is simulated and analyzed. Finally, the experiment of diamond wire sawing monocrystalline silicon is accomplished to validate the simulation results. The results show that the highest sawing temperature in conventional diamond wire sawing (CWS) is 27.9 °C and that in ultrasonic vibration assisted diamond wire sawing (UAWS) is 29.9 °C. In addition, with the increase of wire saw speed, feed rate and workpiece rotation speed, the sawing temperature increases averagely by about 3.6 °C, 1.6 °C, and 2.0 °C respectinvely in CWS, and the sawing temperature in UAWS increases averagely by 3.7 °C, 1.5 °C and 1.5 °C. The sawing temperature in UAWS is about 1.5 °C higher than that in CWS under the same sawing parameters. The average error between the simulation and experimental results of highest sawing temperature is 8.6% and the maximum error is 14%, which verifies the simulation model.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Wire sawing technology: a state-of-the-art review [J]10.1016/j.precisioneng.2015.08.008 ↗
2. Kumar · 2018 · 549
3. An experimental investigation into soft-pad grinding of wire-sawn silicon wafers [J]10.1016/j.ijmachtools.2003.09.006 ↗
4. Wang · 2018 · 153
5. Distribution of diamond grains in fixed abrasive wire sawing process [J]10.1007/s00170-014-5782-y ↗
6. Next-generation multi-crystalline silicon solar cells: diamond-wire sawing, nano-texture and high efficiency[J]10.1016/j.solmat.2015.05.030 ↗
7. LI Shujuan TANG Aofei LI Yan Li lun. Influence of Diamond Wiresaw Excited by Transverse Ultrasonic Vibrationon Cutting Force and Critical Cutting Depth of Hard and Brittle Materials [J]. Journal of Mechanical Engineering, 2016, (3): 187-196. https://doi.org/10.3901/JME.2016.03.187.10.3901/JME.2016.03.187 ↗
8. Surface roughness optimization in processing SiC monocrystal wafers by wire saw machining with ultrasonic vibration [J]10.1177/0954405413508116 ↗
9. A finite element analysis of temperature variation in silicon wafers during wiresaw slicing[J]10.1016/j.ijmachtools.2007.07.009 ↗
10. Study on the technology of cutting silicon carbide crystal wafer[J]
11. Simulation and experimental research on the slicing temperature of the sapphire with diamond wire[J]
12. Research on temperature distribution in silicon wafers slicing with wire saw[J]
13. Fea simulation of the silicon wire saw temperature field[J]
14. Finite element simulation of the silicon wiresaw temperature field [J]
15. An experimental research on the force and energy during the sapphire sawing using reciprocating electroplated diamond wire saw [J]10.1115/1.4038109 ↗
16. Effects of thermal deformation of multi-wire saw's wire guides and ingot on slicing accuracy[J]
17. Study on the slicing of sapphire using a wire tool [J]
18. Prediction of warping in silicon wafer slicing with wire-saw machine [J]
19. Warpage analysis of silicon wafer in ingot slicing by wire-saw machine[C]
20. Finite element analysis of transient thermoelastic behaviors in disk brakes [J]10.1016/j.wear.2003.07.008 ↗
21. Transient thermal analysis for grinding fabrication of hard and brittle material[J]
22. Ren · 2011 · 310
23. Research on simulation of heat source model based on finite element method in surface grinding [J]
24. Modeling and verifying of sawing force in ultrasonic vibration assisted diamond wire sawing (UAWS) based on impact load [J]10.1016/j.ijmecsci.2019.105161 ↗