journal article·2024-11

Dysprosium doped SrCeO3 nanophosphors for advanced photochemical applications: Synthesis, characterization, photo-assisted dye degradation and latent fingerprint visualization

Sanjay S. Majani, R.B. Basavaraj, Muzaffar Iqbal, K.N. Venkatachalaiah, Shiva Prasad Kollur

Publisher page

Abstract

The present work investigates the novel potential of Sr (1-x)CeO 3: xDy 3+ (x = 1–9 mol%) nanoparticles, fabricated through Solution Combustion method using citric acid as fuel. The as-fabricated samples were thoroughly characterised using a variety of techniques to obtain structural, morphological, and optical data. Powder X-ray diffraction (PXRD) examination revealed the presence of an orthorhombic crystal structure ( Pnma ) matching PDF card #01-083-1156. Tauc`s plot evaluating band gap energy utilizing absorption spectra reveals a range of 3.4 eV–4.2 eV with refractive index ranging from 0.64 to 1.22. Using Field Emission Scanning Electron Microscopy (FESEM), it was possible to see a coral-like aggregation for the host and initial concentration of Dy 3+ ions, and a porous structure for higher concentrations. With an average particle size of 38.20 nm, a comprehensive Transmission Electron Microscopy (TEM) study demonstrates the fused aggregation structure. Moreover, quantifiable evidence of the precursors presence is provided by X-ray Photoelectron Spectroscopy (XPS). For the as-fabricated samples, photoluminescence investigations were carried out. Two strong peaks with a dominating 4F 9/2 → 6H 13/2 diploe-dipole transition was seen in the observed emission spectra under 366 nm ( 6H 15/2 → 6P 7/2) excitation. These peaks are positioned at 573 nm ( 4F 9/2 → 6H 13/2) and 478 nm ( 4F 9/2 → 6H 15/2 ). Under UV light, two cationic dyes, Rhodamine-B (Rh–B) and Methylene Blue (MB), were photo-catalytically degraded using the prepared sample (SCD 5). According to 0 th and 1 st order kinetics, the observed data show evidence of effective degradation up to 89.64 % (Rh–B) and 78.86 % (MB) at 80 th minute. In addition, the impact of several analytical parameters on the percentage degradation of Rh–B and MB dyes was investigated. These parameters included catalyst changes, dye dosage, and scavenger effect. The produced nanoparticles were used to create latent fingerprints on two non-porous surfaces: glass and aluminium. The results clearly showed that on both surfaces a type-III level of detection was attained. To summarise, the outcomes indicate that Sr (1-x)CeO 3: xDy 3+ nanoparticles that have been synthesized can be used for advanced forensic applications as well as for the degradation of dye pollutants.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · Gas Sensing Nanomaterials and Sensors · Luminescence Properties of Advanced Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (99)

Show source-provided references
1. Preparation methods of different nanomaterials for various potential applications: a review10.1016/j.molstruc.2023.135148 ↗
2. Nanobiotechnological approaches in anticoagulant therapy: the role of bioengineered silver and gold nanomaterials10.1016/j.talanta.2023.124279 ↗
3. Nanomaterials in anticancer applications and their mechanism of action - a review10.1016/j.nano.2022.102613 ↗
4. Sustainable nanomaterials for biomedical applications10.3390/pharmaceutics15030922 ↗
5. The state of the art of nanomaterials and its applications in energy saving10.1186/s42269-023-00984-4 ↗
6. Review of antimicrobial nanocoatings in medicine and dentistry: mechanisms of action, biocompatibility performance, safety, and benefits compared to antibiotics10.1021/acsnano.2c12488 ↗
7. Synthesis and characterization of nanomaterials for application in cost-effective electrochemical devices10.3390/su151410891 ↗
8. Recent progress of nanotechnology in the research framework of all-solid-state batteries10.1016/j.nanoen.2022.107994 ↗
9. A novel synthesis of hydrothermally prepared europium sulfide and Cerium sulfide nanomaterials doped with yttrium
10. Nanotechnology for high-performance textiles: a promising frontier for innovation
11. Singh · 2023
12. Husen · 2023
13. Husen · 2023
14. Advancing humidity sensing and magnetocaloric properties of spinel structural CoCr2O4 nanoparticles achieved via innovative bismuth doping by combustion synthesis
15. Effect of potassium in catalysts obtained by the solution combustion synthesis for co-production of hydrogen and carbon nanofibers by catalytic decomposition of methane10.1016/j.ces.2023.119408 ↗
16. Investigation of the structural, optical, electrical, and photovoltaic characteristics of nanostructured Ce-doped BaTiO3 by a modified combustion method10.1007/s11082-023-05686-9 ↗
17. Recent advances in nanomaterials based sustainable approaches for mitigation of emerging organic pollutants10.1016/j.chemosphere.2023.138072 ↗
18. Applications of magnetic nanomaterials for wastewater treatment
19. Barium lanthanum oxide nanosheets in photocatalytic and forensic applications: one-pot synthesis and characterization10.3390/molecules28207228 ↗
20. Nanomaterials enabled photoelectrocatalysis for removing pollutants in the environment and food10.1016/j.trac.2023.117187 ↗
21. Strontium-based nanomaterials for the removal of organic/inorganic contaminants from water: a review10.1016/j.ccr.2023.215286 ↗
22. Nanomaterials for photocatalysis and applications in environmental remediation and renewable energy10.3762/bjnano.14.58 ↗
23. Photocatalytic and antimicrobial studies of green synthesized Dy3+ doped ZnO nanoparticles prepared from Rhododendron arboreum petal extract
24. Verma, H., Tripathi, A., & Upadhyay, S. A comprehensive study of dielectric, modulus, impedance, and conductivity of SrCeO3 synthesized by the combustion method. Int. J. Appl. Ceram. Technol., 1-16. https://doi.org/10.1111/ijac.14739.10.1111/ijac.14739 ↗
25. Solution combustion synthesis of Dy3+doped La2O3 nanoparticles: an investigation of their structural, optical and photoluminescence characteristics10.1016/j.inoche.2023.111910 ↗
26. Antibacterial activity of solvothermal obtained ZnO nanoparticles with different morphology and photocatalytic activity against a dye mixture: methylene blue, rhodamine B and methyl orange10.3390/ijms24065677 ↗
27. Bio-genic synthesis of calcium coated zinc oxide nanoparticles from beetroot extract and their photo-degradation study on methylene blue and rhodamine B
28. Degradation of Rhodamine B by CuFe2O4 nanoparticles anchored on montmorillonite as an activator of sodium persulfate10.1016/j.jtice.2023.105073 ↗
29. Improved ethanol sensing and photocatalytic Rhodamine B dye degradation of Ni-SnO2 nanoparticles10.1016/j.mseb.2022.116091 ↗
30. Performance evaluation of dye wastewater treatment technologies: a review10.1016/j.jece.2023.109610 ↗
31. Toxic dye removal, remediation, and mechanism with doped SnO2-based nanocomposite photocatalysts: a critical review
32. Current perspectives, recent advancements, and efficiencies of various dye-containing wastewater treatment technologies
33. Modification of activated carbon-based adsorbent for removal of industrial dyes and heavy metals: a review
34. Reactive dye removal by photocatalysis and sonophotocatalysis processes using Ag/TiO2/Fe3O4 nanocomposite10.1007/s11270-023-06136-8 ↗
35. Removal of azo dyes from wastewater through heterogeneous photocatalysis and supercritical water oxidation10.3390/separations10040230 ↗
36. Degradation of rhodamine dyes by advanced oxidation processes (AOPs) – focus on cavitation and photocatalysis - a critical review10.1016/j.wri.2023.100220 ↗
37. Novel 3D sphere-like β-In2S3/Biochar nanoflowers for remediation of dyes in single and binary systems and interpretation using statistical physical modeling
38. A comprehensive review on adsorption, photocatalytic and chemical degradation of dyes and nitro-compounds over different kinds of porous and composite materials10.3390/molecules28031081 ↗
39. Nano Ca–Mg–Zn ferrites as tuneable photocatalyst for UV light-induced degradation of rhodamine B dye and antimicrobial behavior for water purification10.1016/j.ceramint.2022.12.107 ↗
40. Cocatalyst loaded Al-SrTiO3 cubes for Congo red dye photo-degradation under wide range of light10.1038/s41598-023-33249-1 ↗
41. Development of highly efficient cost-effective CdS/Ag nanocomposite for removal of azo dyes under UV and solar light10.1016/j.ceramint.2022.11.123 ↗
42. Rapid microwave fabrication of new nanocomposites based on Tb-Co-O nanostructures and their application as photocatalysts under UV/Visible light for removal of organic pollutants in water10.1016/j.arabjc.2023.104579 ↗
43. Enhanced UV light-driven photocatalytic degradation of methyl orange using MoO3/WO3-fluorinated TiO2 nanocomposites
44. Metal sulphides and their heterojunctions for photocatalytic degradation of organic dyes-A comprehensive review10.1007/s11356-023-28753-w ↗
45. Sustainable synthesis strategies: a comparative Life cycle perspective on LaFeO3 nanoparticles10.1021/acssuschemeng.4c01930 ↗
46. Sol–gel synthesis of strontium ferrate (SrFeO3) nanoparticles and evaluation of anti-leukemic effects against leukemic cell lines10.1007/s10971-023-06251-2 ↗
47. Simple construction of gadolinium cobaltite perovskite (GdCoO3): unveiling the dynamic electrode potential for pseudocapacitors10.1016/j.jtice.2024.105411 ↗
48. Facile synthesis of perovskite SrCeO3 nanocomposite with reduced graphene oxide via hydrothermal route for effective oxygen evolution reaction10.1016/j.fuel.2024.131442 ↗
49. Hydrothermal synthesis of monoclinic CrVO4 nanoparticles and catalytic ammoxidation of 2-chlorotoluene10.1007/s10562-023-04305-2 ↗
50. Modification of local site preference for achieving tunable color emission from blue to near-white in Sr3(PO4)2:Dy3+ phosphor10.1016/j.materresbull.2024.112885 ↗
51. Tailoring oxygen disparity induced luminescence of Dy3+ incorporated WO3 thin films10.1016/j.matchemphys.2023.128570 ↗
52. Exploring the structural, optical, and dielectric characteristics of polyacrylamide gel synthesized CeMnO3 nanoparticles with Co & Ni ion doping10.1016/j.mseb.2024.117371 ↗
53. Highly thermostable Ba2Ln2Ge4O13:Dy3+ (Ln = Y, Gd) phosphors: synthesis and optical properties10.1016/j.ceramint.2023.07.152 ↗
54. Photocatalytic polysulfone membrane incorporated by ZnO-MnO2@SiO2 composite under UV light irradiation for the reliable treatment of natural rubber-laden wastewater10.1016/j.cej.2022.138593 ↗
55. Photocatalytic dye degradation and antibacterial activities of CeO2/g-C3N4 nanomaterials for environmental applications10.1007/s11356-022-23815-x ↗
56. Photogenic MnO2/Ag metal nanocomposites and their dye adsorbing activities10.1016/j.jscs.2023.101646 ↗
57. Versatile deep red-emitting SrCeO3: Eu3+ nanopowders for display devices and advanced forensic applications10.1016/j.jssc.2023.124360 ↗
58. Evolution of shapes and identification of level II and III features of fingerprints using CaZrO3:Sm3+ fluorescent markers prepared via solution combustion route10.1016/j.optmat.2018.11.058 ↗
59. Effect of cobalt addition on structural, optical, morphological and magnetic properties of NiO nanoparticles prepared by chemical precipitation method10.1016/j.inoche.2024.112057 ↗
60. Cu doped ZnO nanoparticles: correlations between tuneable optoelectronic, antioxidant and photocatalytic activities10.1016/j.jpcs.2023.111715 ↗
61. Effect of Ag doping on crystallinity and microstrain of LaMnO3 nanoparticles: confirmations of defect levels with positron lifetime and Doppler-broadening calculations10.1016/j.physb.2021.413087 ↗
62. Effect of iron-doping on the structure and photocatalytic activity of TiO2 nanoparticles10.3390/catal13010058 ↗
63. Photometric study on excitation tailored cyan to white color conversion in SrCeO3: Dy3+ for wLEDs, latent fingerprint, and security ink applications
64. Surface chemical analysis and white-emitting characterization of dysprosium-activated single-phase lithium sodium borophosphate10.1016/j.jallcom.2020.154809 ↗
65. Synthesis of CuO, ZnO nanoparticles, and CuO-ZnO nanocomposite for enhanced photocatalytic degradation of Rhodamine B: a comparative study10.1038/s41598-024-60008-7 ↗
66. Cu2Te/CoTe nanoparticles with tuneable bandgaps: implications for photovoltaic and optoelectronic devices
67. Photoemission study of CeO2 and SrCeO310.1016/S0368-2048(96)80056-9 ↗
68. Study on a highly thermostable Dy3+-activated borophosphate phosphor10.1021/acs.inorgchem.4c00358 ↗
69. Enhanced photocatalytic, photoluminescence and fingerprint properties of Dy3+ ions doped BaZrO3 nanopowders for multifunctional applications10.1016/j.inoche.2024.112255 ↗
70. Profound investigation on bidirectional luminescence of Dy3+ activated BaCeO3 perovskite for enhanced solar cell performance
71. Luminescence properties of Dy3+ ions activated novel warm white-light emitting CaGd2ZnO5 nanophosphors10.1016/j.ceramint.2015.05.073 ↗
72. Multiwavelength excited white-emitting phosphor Dy3+-activated Ba3Bi(PO4)310.1016/j.jallcom.2011.11.114 ↗
73. Structural and optical properties of Cd2MgTeO6:Dy3+, Na+ phosphors for potential application in w-LEDs and personal identification10.1016/j.jallcom.2024.173620 ↗
74. Photoluminescence properties of Dy3+ activated Ca2SiO4 nanophosphor for WLED applications10.1080/24701556.2017.1357580 ↗
75. Tunable photoluminescence of Ba2GdF7: Tb3+, Eu3+ nanoparticles based on energy transfer10.1016/j.jlumin.2023.119914 ↗
76. Optimization of photoluminescence of Eu3+ doped YVO4 nanoparticles by green microwave synthesis10.1016/j.matchemphys.2023.128592 ↗
77. New insights into the rapid deposition and visualization of latent fingerprints: cyan light emitting GdAlO3:Ce3+ nano fluorescent probe10.1016/j.jphotochem.2019.02.027 ↗
78. Structural and luminescence properties of Dy3+ activated niobiosilicate glass with high thermal stability for W-LED application
79. Spectroscopic investigations on Dy3+ ions doped zinc lead alumino borate glasses for photonic device applications10.1016/j.jre.2018.04.013 ↗
80. Recent progress of photoelectrocatalysis systems for wastewater treatment
81. Recent progress in semiconductor/graphene photocatalysts: synthesis, photocatalytic applications, and challenges [10.1039/D2RA07225D]10.1039/D2RA07225D ↗
82. Advanced strategies for promoting the photocatalytic performance of FeVO4 based photocatalysts: a review of recent progress10.1016/j.jallcom.2023.168995 ↗
83. Exploring the comparison of optical, dielectric and photocatalytic performance of Yb3+ and Gd3+ half-doped DyCrO3 nanostructures10.1016/j.matchemphys.2023.128848 ↗
84. Effect of Zr substitution on photocatalytic and magnetic properties of lanthanum titanate10.1515/zpch-2024-0585 ↗
85. A comparative investigation of structural, magnetic and photocatalytic properties of pure, Ce-Ni and Cd-Ni co-doped BiFeO3 nanoparticles10.1016/j.mseb.2024.117188 ↗
86. Citric acid mediated hydrothermal synthesis of LaMn1-xFexO3 nanoparticles for visible light-driven photocatalytic applications10.1007/s10854-023-11724-9 ↗
87. Preparation, characterization, and mechanism for enhanced photocatalytic performance in Bi1-xSmxFeO3 nanoparticles10.1007/s10971-024-06392-y ↗
88. Ultrasound-enhanced catalytic degradation of simulated dye wastewater using waste printed circuit boards: catalytic performance and artificial neuron network-based simulation10.1007/s10661-022-10744-y ↗
89. Photocatalytic degradation of aqueous methylene blue using ca-alginate supported ZnO nanoparticles: point of zero charge role in adsorption and photodegradation10.1007/s11356-023-27318-1 ↗
90. Synthesis and characterization of lanthanum oxide nanoparticles: a study on the effects of surfactants
91. The synthesis of multifunctional porous honeycomb-like La2O3 thin film for supercapacitor and gas sensor applications10.1016/j.jcis.2016.08.056 ↗
92. Efficient blue light-emitting diodes based on quantum-confined bromide perovskite nanostructures10.1038/s41566-019-0505-4 ↗
93. Photocatalytic degradation properties of Li-Cr ions substituted CoFe2O4 nanoparticles for wastewater treatment application
94. Synthesis and characterization of hierarchical multilayered flower-like assemblies of Ag doped Bi2WO6 and their photocatalytic activities10.1016/j.spmi.2013.09.028 ↗
95. Effect of pH on visible-light-driven Bi2WO6 nanostructured catalyst synthesized by hydrothermal method10.1016/j.spmi.2014.11.038 ↗
96. Ultrasonic-assisted synthesis of Nd-doped ZnO for photocatalysis10.1016/j.matlet.2012.09.027 ↗
97. Sonochemical synthesis of Dy-doped ZnO nanostructures and their photocatalytic properties10.1016/j.jallcom.2013.04.133 ↗
98. Synthesis of ZnO nanoparticles by precipitation method: characterizations and applications in decipherment of latent fingerprints
99. Use of conductive Ti2O3 nanoparticles for optical and electrochemical imaging of latent fingerprints on various substrates10.1016/j.jelechem.2023.117387 ↗