A rapid-sintering Cu-Cu joints with ultrahigh shear strength and super reliability for power electronics package
Source abstract
Abstract
Sintered Cu interconnection technology for power electronics has been widely investigated owing to its unique low temperature sintering high temperature service characteristics and price superiority. However, the currently research usually requires long sintering time (>30 min) and high pressure (>5 MPa). Here, we synthesized copper formate coated Cu nanoparticles (Cu-FA) by a solvothermal reaction, which can achieve rapid sintering at 260 °C with pressure of 5 MPa in 5 min to obtain robust joints of 67.41 MPa for fabricating SiC MOSFET devices. After 1000 h thermal aging and 1000 cycles thermal shock, the strength of joints can still maintained above 50 MPa. Moreover, SiC MOSFET modules were demonstrated using Cu-FA die attachment, which exhibit a 43.6 % lower thermal resistance compared to commercial Sn–Pb solder. Furthermore, copper paste performs better in long-term reliability. This paper provides an effective way to obtain high quality sintered Cu joints rapidly, which is suitable for the packaging of next generation power devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies · Silicon Carbide Semiconductor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Hornberger · 2004 · 2538
2. Switching characteristics of GaN HFETs in a half bridge package for high temperature applications, IEEE10.1109/TPEL.2007.915671 ↗
3. Study and handling methods of power SIC MOSFET module failures in power electronic converter systems10.1109/TPEL.2014.2373390 ↗
4. Silicon carbide power transistors: a new era in power electronics is initiated10.1109/MIE.2012.2193291 ↗
5. A survey of wide bandgap power semiconductor devices10.1109/TPEL.2013.2268900 ↗
6. Design and experimental Validation of a wire-bond-less 10-kV SiC MOSFET power module10.1109/JESTPE.2019.2944138 ↗
7. Survey of high-temperature reliability of power electronics packaging components10.1109/TPEL.2014.2357836 ↗
8. Effects of self-aligned electroplating Cu pillar/Sn-xAg bump on dense Al lines for chip-to-package connection10.1016/j.mssp.2016.02.020 ↗
9. Nickel–tin transient liquid phase bonding toward high-temperature operational power electronics in electrified vehicles10.1109/TPEL.2012.2212211 ↗
10. Pressureless sintered-silver die-attach at 180 °C for power electronics packaging10.1109/TPEL.2021.3074853 ↗
11. Pressureless sintered-silver as die attachment for bonding Si and SiC chips on silver, gold, copper, and nickel metallization for power electronics packaging: the practice and science
12. Pressureless sintering of nanosilver paste as die attachment on substrates with ENIG finish for semiconductor application10.1016/j.jallcom.2018.10.294 ↗
13. Effect of oxygen partial pressure on silver migration of low-temperature sintered nanosilver die-attach material10.1109/TDMR.2010.2056372 ↗
14. Effect of SiC reinforcement on the reliability of Ag nanoparticle paste for high-temperature applications10.1007/s10854-018-0514-y ↗
15. Reducing migration of sintered Ag for power devices operating at high temperature10.1109/TPEL.2020.2994343 ↗
16. A supersaturated Cu-Ag nanoalloy joint with ultrahigh shear strength and ultrafine nanoprecipitates for power electronic packaging10.1016/j.jmst.2022.10.038 ↗
17. One-step fabrication of a highly conductive and durable copper paste and its flexible dipole tag-antenna application10.1039/C3CC49782H ↗
18. A mild aqueous synthesis of ligand-free copper nanoparticles for low temperature sintering nanopastes with nickel salt assistance
19. Quasi-in-situ observation of the grain growth and grain boundary movement in sintered Cu nanoparticle interconnects10.1016/j.actamat.2022.118135 ↗
20. Highly conductive Cu-Cu joint formation by low-temperature sintering of formic acid-treated Cu nanoparticles10.1021/acsami.6b10280 ↗
21. Novel copper particle paste with self-reduction and self-protection characteristics for die attachment of power semiconductor under a nitrogen atmosphere10.1016/j.matdes.2018.11.003 ↗
22. The formation of Cu-Cu joints by low temperature sintering Cu NPs with copper formate layer and its oxidation enhancement
23. Bonding of power device to ceramic substrate using Sn-coated Cu micro paste for high-temperature applications10.1016/j.apsusc.2020.146060 ↗
24. Transient liquid phase bonding process using Sn-coated Cu dendritic particles10.1007/s12540-020-00702-z ↗
25. Enhanced oxidation-resistant Cu@Ni core-shell nanoparticles for printed flexible electrodes10.1021/acsami.7b14572 ↗
26. A green approach of synthesizing of Cu-Ag core-shell nanoparticles and their sintering behavior for printed electronics, IEEE Trans. Compon. Packaging
27. A green approach of synthesizing of Cu-Ag core-shell nanoparticles and their sintering behavior for printed electronics10.1016/j.jallcom.2017.07.045 ↗
28. Ethylene glycol-based Ag plating for the wet chemical fabrication of one micrometer Cu/Ag core/shell particles10.1016/j.jallcom.2014.11.111 ↗
29. Pressure-assisted sinter bonding method at 300°C in air using a resin-free paste containing 1.5 μm Cu@Ag particles10.1016/j.apsusc.2021.149156 ↗
30. Rapid sintering by thermo-compression in air using a paste containing bimodal-sized silver-coated copper particles and effects of particle size and surface finish type10.1016/j.jallcom.2021.163223 ↗
31. Novel approach to copper sintering using surface enhanced brass micro flakes for microelectronics packaging10.1016/j.jallcom.2020.156043 ↗
32. Bonding strength enhancement of low temperature sintered SiC power module by femtosecond laser induced micro/nanostructures10.1016/j.mssp.2022.106802 ↗
33. Design of Cu nanoaggregates composed of ultra-small Cu nanoparticles for Cu-Cu thermoscompression bonding
34. Cu-Cu joint formation by low-temperature sintering of self-reducible Cu nanoparticle paste under ambient condition10.1016/j.apsusc.2021.151220 ↗
35. Depressing of Cu-Cu bonding temperature by composting Cu nanoparticle paste with Ag nanoparticles10.1016/j.jallcom.2017.03.220 ↗
36. Low pressure Cu-Cu bonding using MOD ink-modified Cu particle paste for die-attachment of power semiconductors10.1007/s10854-021-07551-5 ↗
37. Enhanced copper micro/nano-particle mixed paste sintered at low temperature for 3D interconnects10.1063/1.4954966 ↗
38. Reliability of pressure-free Cu nanoparticle joints for power electronic devices
39. Reliability of Cu nanoparticle joint for high temperature power electronics10.1016/j.microrel.2014.07.113 ↗
40. Power cycle reliability of Cu nanoparticle joints with mismatched coefficients of thermal expansion10.1016/j.microrel.2016.07.031 ↗
41. Low-temperature sintering of Cu/functionalized multi-walled carbon nanotubes composite paste for power electronic packaging
42. Oxidation-enhanced bonding strength of Cu sinter joints during thermal storage test10.1016/j.jmst.2021.10.047 ↗
43. Unraveling the complex oxidation effect in sintered Cu nanoparticle interconnects during high temperature aging
44. Superstable, high-conductivity Cu conductive adhesive10.1021/acsaelm.3c01150 ↗
45. Controlling the amount of copper formate shells surrounding Cu flakes via wet method and thermo-compression sinter bonding between Cu finishes in air using flakes10.3390/met13091516 ↗